Radio Shack RPO-137 Bedienungsanleitung

Thank you for purchasing your Racing

Scanner from RadioShack. Your handheld

scanner is one of a new generation of

race scanners.

PRO-137

20-137

RACING SCANNER

www.radioshack.com

What’s Included

Scanner

Antenna: 1 Long, 1 Short

Belt Clip

Preprogrammed Race

Frequency List

User’s Guide

Quick Start Guide

Contents

About Your Scanner .......................................4

Connecting the Antenna....................................6

Attaching the Belt Clip.......................................6

Powering Your Scanner ......................................6

Batteries...............................................................7

Battery Notes ..........................................................8

External Power ........................................................9

Turning on the Scanner ......................................9

Setting the Volume .............................................9

Setting the Squelch ............................................9

Headphones and Speakers..............................10

Listening Safely .....................................................10

Understanding Your Scanner .......................10

Understanding Banks .......................................11

Service Banks.........................................................11

Channel Storage Banks ........................................11

Transferring Data from Another Scanner or PC.12

Cloning Your Scanner ...........................................12

Wired Programming .............................................12

Settings........................................................13

Delay ..................................................................13

Using the Keylock .............................................14

Turning the Keytone On and Off .....................14

Using the Backlight Display .............................15

Using the Auto Backlight Display....................15

Using Power-On Light ......................................15

Using the Battery Save Function .....................16

Adjusting the LCD Contrast.............................16

Using the Scanner at the Racetrack .............16

Before You Get to the Track.............................17

When You Get to the Track ..............................17

Loading the Preset Race Frequency List.............18

Programming Driver Frequencies .......................18

Monitoring a Car...................................................19

Select the Car’s Primary Frequency.....................19

Contents

Overwriting the Preset Race Frequency List.......19

Storing Known Frequencies Into Channels ....20

Editing a Tag .....................................................21

Copying a Frequency .......................................22

Searching .....................................................23

Fine Tune ...........................................................23

Service Bank Search..........................................23

Chain Search .....................................................24

Search Speeds...................................................25

Storing Found Frequencies..............................25

Programming Search Ranges ..........................25

Search Skip Memory.........................................26

Signal Stalker I...................................................27

Setting the Signal Stalker I Options ....................27

Signal Stalker I Options........................................28

Using Signal Stalker I ............................................29

Band Meter for Signal Stalker I............................30

Scanning ......................................................31

Manually Selecting a Channel .........................31

Turning Channel Storage Banks On and Off..32

Locking Out Channels......................................32

Priority................................................................33

Weather Scan ....................................................34

Turning on the Weather Alert Feature ...............34

Skywarn..............................................................34

About Skywarn ......................................................34

Troubleshooting...........................................36

Resetting the Scanner ..........................................37

Additional Information.................................37

FCC Notice........................................................37

Scanning Legally ...............................................38

Care....................................................................39

Service and Repair ................................................39

Speciﬁcations ...................................................40

About Your Scanner

Headphones

Func

Various functions in

combination with other

keys.

Press and release, then

press the next key.

Enters Menu mode.

Press to return to the

previous menu.

Press and hold to exit

Menu mode.

SEL / VOL / SQL

Rotate to select next or

previous, and to change

scan or search direction.

Push to enter Volume

Control mode, or to

complete the entry of

frequencies and text in

Menu mode.

Push after Func to enter

squelch control mode.

PC / IF

Connect an optional PC

interface cable here to

use the scanner with your

computer.

6V 800mA

Connect an external

power source here (not

included).

CAR

Selects cars manually

and inputs car

information.

SCAN / MAN

Scans the stored

channels or manually

enter a channel.

SRCH / PSE

Displays search menu.

Pauses or resumes

search or ﬁne tune

operation.

// KEYLOCK

Press to turn the backlight on. Press and hold to turn the

radio on or off.

•CLR / L/OUT

Enters a decimal point, clears an incorrect entry, locks out

selected channels or skips speciﬁed frequencies during a

search.

0 /

Press after Func to activate Signal Stalker I.

EPGM /

Programs frequencies into channels. Press after Func to

turn on SkyWarn.

1 / PRI

Press after Func to turn priority on or off.

2 ABC / DLY

Press after Func to program a 2-second delay for a

selected channel or service.

3 DEF / WX

Press after Func to start weather scan.

1- 0 / A - Z

Press to enter numbers and letters.

Connecting the Antenna

Attach the supplied antenna

to the scanner by screwing it

tightly onto the anchor post at

the top of the scanner.

When using an external

antenna, always use 50-ohm,

RG-58, or RG-8, coaxial

cable to connect to it. If the

antenna is over 50 feet from

the scanner, use RG-8 low-loss

dielectric coaxial cable. If your

antenna’s cable does not have

an SMA connector, your local

RadioShack store carries a

variety of SMA adapters.

Attaching the Belt Clip

1. Align the belt clip so that

the ﬁnger indentation is

towards the top of the

scanner.

2. Align the center of the clip with the anchor

post.

3. Place the clip on the post and slide the clip

upwards until it clicks into place.

To remove the belt clip:

1. Rotate the clip so that the ﬁnger indentation

is towards the bottom of the scanner.

2. Slide the clip up until it comes free of the

anchor post.

Powering Your Scanner

You can power your scanner with three AAthree AA

batteries (not supplied) or an external poweror an external power

source (not supplied).(not supplied)..

Batteries

For the longest operation and best performance,

use alkaline batteries, available at your local

RadioShack store, or use RadioShack nickel-

metal hydride (Ni-MH) rechargeable batteries.

To install batteries:

1. Slide open the battery compartment cover on

the back of the scanner.

2. Set the switch according to the type of

batteries you are installing: ALKALINE

or Ni-MH.

3. Place 3AA batteries into

the battery comparment.

4. Replace the cover.

To charge batteries:

1. Set the switch to Ni-MH.

2. Install rechargeable batteries.

3. Connect an external power source to the

6V 800mA jack.

The scanner stops charging automatically after a

maximum of 14 hours.

Warning: Only set the switch inside the

battery compartment to Ni-MH for use with

Ni-MH rechargeable batteries. Never use non-

rechargeable batteries when the switch is set to

Ni-MH.

Alkaline / Ni-MH

Switch

Battery Notes

• When battery power is low, BATTERY Symbol

ﬂashes and the scanner beeps every 15

seconds. When battery power is depleted,

the scanner turns itself off.

• Rechargeable batteries last longer and

deliver more power if you let them fully

discharge once a month. To do this, use the

scanner until BATTERY Symbol ﬂashes.

• Use only fresh batteries of the required size

and recommended type. Do not mix old and

new batteries, different types (alkaline or

rechargeable), or rechargeable batteries of

different capacities.

• Remove old or weak batteries. If you will not

use the scanner with batteries for a month,

remove the batteries. Batteries can leak

chemicals that destroy electronic circuits.

• Always dispose of old batteries promptly and

properly. Do not bury or burn them.

The EPA certiﬁed RBRC© Battery

Recycling Seal on the nickel-cadmium

(Ni-Cd) battery indicates RadioShack

voluntarily participates in an industry

program to collect and recycle these

batteries at the end of their useful life, when taken

out of service in the United States or Canada. The

RBRC program provides a convenient alternative

to placing used Ni-Cd batteries into the trash or

the municipal waste stream, which may be illegal

in your area. Please call 1-800-THE-SHACK

(1-800-843-7422) for information on Ni-Cd battery

recycling and disposal band/restrictions in your

area. RadioShack’s involvement in this program is

part of the company’s commitment to preserving

our environment and conserving our natural

resources.

External Power

You can power your scanner using a 6V, 800mA

AC/DC adapter (not supplied).

To use an external power source:

1. Always connect the adapter (not supplied) to

the scanner ﬁrst.

2. Plug the adapter into the power source.

3. To disconnect, unplug the adapter from the

power source ﬁrst.

Warning: Do not connect a charging adapter to

the scanner if non-rechargeable batteries (such as

alkaline batteries) are installed in the scanner and

the switch is set to Ni-MH, or if you are unsure of

the switch’s position. Non-rechargeable batteries will

get hot and can explode if you try to recharge them.

Caution: You must use a Class 2 power source

that supplies 6V DC and delivers at least 800mA.

Its center tip must be set to positive and its plug

must ﬁt the scanner’s DC 6V 800mA jack. Using

an adapter that does not meet these speciﬁcations

could damage the scanner or the adapter.

Turning on the Scanner

Make sure the scanner’s antenna is connected,

then press and hold / / KEYLOCK. The

scanner turns on.

Setting the Volume

1. Push the SEL/VOL/SQL knob.

2. Rotate the knob to select the volume level

from 0 to 15.

Setting the Squelch

1. Press Func, then push the SEL/VOL/SQL knob.

2. Rotate the knob to select the squelch level

from 0 to 15.

Headphones and Speakers

For private listening, you can plug headphones

(not included) into the headphone jack on top

of your scanner. This automatically disconnects

the internal speaker. Note that the sound is not

stereo.

Listening Safely

To protect your hearing, follow these earphone or

headphones guidelines:

• Do not listen at extremely high volume

levels. Extended high-volume listening can

lead to permanent hearing loss.

• Set the volume to the lowest setting before

listening. Turn on the scanner, and adjust the

volume to a comfortable level.

• After you set the volume, do not increase

it. Over time, your ears adapt to the volume

level, so a volume level that does not cause

discomfort might still damage your hearing.

• Even though some earphones/headphones

let you hear some outside sounds when

listening at normal volume levels, they still

can present a trafﬁc hazard.

Understanding Your Scanner

We use a few simple terms in this manual to

explain the features of the scanner. Familiarize

yourself with these terms and the scanner’s

features, and you can put the scanner to work for

you right away.

The scanner scans conventional frequencies and

racing. A frequency, expressed in kHz or MHz,

is the tuning location of a station. To ﬁnd active

frequencies, use the search function.

Besides searching within a selected frequency

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Scanner Handbücher

Radio Shack

Radio Shack Pro-92 Bedienungsanleitung

Radio Shack

Radio Shack PRO-96 Bedienungsanleitung

Radio Shack

Radio Shack 20-501 Bedienungsanleitung

Radio Shack

Radio Shack PRO-2048 Bedienungsanleitung

Radio Shack

Radio Shack PRO-94 Bedienungsanleitung

Radio Shack

Radio Shack PRO-650 Bedienungsanleitung

Radio Shack

Radio Shack PRO-76 Bedienungsanleitung

Radio Shack

Radio Shack PRO-652 Bedienungsanleitung

Radio Shack

Radio Shack PRO-528 Bedienungsanleitung

Radio Shack

Radio Shack Pro-60 Bedienungsanleitung

Radio Shack

Radio Shack Pro 2055 Bedienungsanleitung

Radio Shack

Radio Shack 20-427 PRO-2054 Bedienungsanleitung

Radio Shack

Radio Shack PRO-63 Bedienungsanleitung

Radio Shack

Radio Shack 20-106 Bedienungsanleitung

Radio Shack

Radio Shack 25-3097 Bedienungsanleitung

Radio Shack

Radio Shack PRO-79 Bedienungsanleitung

Radio Shack

Radio Shack 20-163 Bedienungsanleitung

Radio Shack

Radio Shack Race Scanner Bedienungsanleitung

Radio Shack

Radio Shack PRO-2049 Bedienungsanleitung

Radio Shack

Radio Shack PRO-651 Bedienungsanleitung

Radio Shack

Radio Shack Pro-2032 Bedienungsanleitung

Radio Shack

Radio Shack PRO-97 Bedienungsanleitung

Radio Shack

Radio Shack PRO-2051 Bedienungsanleitung

Radio Shack

Radio Shack PRO-89 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung