Radio Shack 43-1107A Handbuch

(DRAFT COPY)

Text Only

RADIOSHACK MODEL 43-1107A (FCC ID: AAO4301107A) - USER MANUAL

AND OPERATIONAL DESCRIPTION

USER MANUAL

CAUTION

You are cautioned that any changes or modifications not expressly approved

in this manual could void your authority to operate this equipment.

Introduction

Your 900 MHz cordless phones is designed and engineered to exacting

standards for reliability, long life, and outstanding performance.

Features

900 MHz Extended Range Technology

40 Channel Autoscan

9-Number Memory Dialing

3 One-Touch Priority Keys

Desk or Wall Mountable

Tone/Pulse Dialing

Handset Volume Control

32 Digit Redial

Page/Find

AutoTalk

AutoStandby

7 Hours Talk Time

Hearing Aid Compatible

Your 900 MHz cordless phone includes AutoTalk and AutoStandby. AutoTalk

allows you to answer a call by just removing the handset from the base so

you dont have to waste time pushing buttons or flipping switches.

AutoStandby allows you to hang up by simply returning the handset to the

base.

The UltraClear Plus true compander circuitry virtually eliminates

background noise. This innovative technology, together with 40 different

channels, provides you with the best possible reception during all your

conversations.

To protect you against misbilled calls which might result from your phone

being activated by other equipment, your phone has Random Code digital

security which automatically selects one of over 65,000 digital security

codes for the handset and base. Also, the AutoSecure feature

electronically locks your phone when the handset is in the base.

To get the most from your phone, please read this owners manual

thoroughly. Also, be sure to complete the product registration form and

mail it in.

Included with Your Phone

This Owners Manual

Other Printed Material

Precautions and Important Safety Instructions

Controls and Functions

1.talk - answers or places calls

2.*/tone - switches to tone dialing in pulse dial mode

3.redial - redials the last number

4.pause - adds a timed pause in a memory dialing sequence

5.talk/batt - LED indicates when phone is in use or the battery is low

6.flash - accesses call waiting (if available)

7.mem - enters or recalls numbers in memory

8.volume - sets both the ringer and earpiece volumes

9.chan - selects another channel for clearer reception

10.m1, m2, m3 - accesses stored numbers in memory locations 1, 2, and 3

for one-touch dialing

11.handset retainer - holds handset in base for wall mounting.

12.status LED - indicates the phone is in use or the handset is charging

13.page/find - locates the handset

Installation

Charging the Battery Pack

The rechargeable Nickel-Cadmium battery pack must be fully charged before

using your phone for the first time. Before plugging the phone line into

your new phone, you must charge the battery for approximately 15-20 hours

without interruption.

1.Remove the handset battery cover.

2.Plug the batterys cable into the handset and place the battery pack

inside the battery compartment.

3.Replace the battery cover.

Charging the Handset

Place the handset on the base to charge. (The handset can charge in

either the face-up or face-down position.)

Low Battery Indicator

When the battery pack in the handset is low and needs to be charged, the

batt LED flashes every 3 seconds. If this occurs while you are on the

phone, you will hear an alert tone. Complete your call as quickly as

possible, and return the handset to the base for charging.

Cleaning the Battery Contacts

To maintain a good charge, it is important to clean all battery contacts

on the handset and base about once a month. Use a pencil eraser or other

contact cleaner. Do not use any liquids or solvents.

Selecting a Location

Before choosing a location for your new phone, read the Installation

Considerations included in the Precautions and Important Safety

Instructions brochure. Note: Raise the antenna on the base to get best

communication range.

Setting the Dial Mode Switch

Desk or Tabletop Installation

1.Plug the AC adapter cord into the 9V DC input jack on the base.

2.Wrap the AC adapter cord inside the molded strain-relief.

3.Plug one end of the long telephone cord into the TEL LINE jack on the

base.

4.Place the telephone cord into the right molded channel cord holder.

5.Plug the other end of the telephone cord into the telephone wall jack.

(Remember, the phone must be fully charged before you can use it.)

6.Plug the AC adapter into a standard 120V AC wall outlet that is not

controlled by a wall switch.

7.Raise the antenna on the base.

Wall Installation

Setting the Handset Retainer for Wall Mounting

1.Remove the handset retainer on the base by sliding it upward.

2.Flip the retainer over so the tab is facing up.

3.Slide the retainer back onto the base.

Mounting on a Standard Wall Plate

The phone is designed to be mounted on a standard AT&T or GTE wall plate.

1.Plug the AC adapter into the base.

2.Place the AC adapter cord inside the left molded channel cord holder.

3.Plug a short telephone cord into the TEL LINE jack on the base.

4.Place the telephone cord into the right molded channel cord holder and

plug the other end of the cord into the wall jack. (Remember, the phone

must be fully charged before you can use it.)

5.Place the base on the two posts of the wall plate and slide downward to

secure.

6.Plug the AC adapter into a standard 120V AC wall outlet that is not

controlled by a wall switch.

7.Raise the antenna on the base to get best communication range.

Mounting Directly on a Wall

If you do not have a standard wall plate, you can mount the phone

directly on a wall. Before mounting your cordless telephone, consider the

following:

Select a location away from electrical cables, pipes, or other items

behind the mounting location that could cause a hazard when inserting

screws into the wall.

Make sure the wall material is capable of supporting the weight of the

base and handset; otherwise, damage to the unit could result.

Use #10 screws with anchoring devices suitable for the wall material

where the base will be placed.

1.Insert the screws, with their appropriate anchoring devices, 35/16

inches apart. Allow 3/16 of an inch between the wall and screw heads for

mounting the phone.

2.Plug the AC adapter into the base.

3.Place the AC adapter cord inside the left molded channel cord holder.

4.Plug one end of the long telephone cord into the TEL LINE jack on the base.

5.Place the telephone cord into the right molded channel cord holder.

6.Place the base on the screws and push down until its firmly seated.

7.Plug the other end of the telephone line into the telephone wall jack.

(Remember, the phone must be fully charged before you can use it.)

8.Plug the AC adapter into a standard 120V AC wall outlet that is not

controlled by a wall switch.

9.Raise the antenna on the base to get best communication range.

Setting Up Your Phone

Raising the Antenna

Before using your phone, be sure to raise its antenna to the vertical

position.

Adjusting Ringer/Volume Controls

Ringer Tone and Volume

1.While the phone is not in use, press volume .

2.The phone has two ringer tones, each with two volume levels. Press

volume again until you hear the ringer tone and volume level you want.

Setting the Handset Earpiece Volume

1.While you are on a call, press volume .

2.The phone has two receiver volume levels, one soft and one loud. Press

volume again until you hear the volume level you want.

3.Plug the AC adapter into a standard 120VAC wall outlet that is not

controlled by a wall switch.

4.Place the handset upright in the charging cradle. (The handset can be

placed in the charger with the keypad facing either the front or back of

the charging cradle.)The charge LED lights while the unit is charging.

Using Your Phone

Making and Receiving Calls

Storing a Number in Memory

Your 900 MHz cordless phone has 9 memory locations for storing important

telephone numbers.

1.Remove the handset from the base and press mem. The talk LED flashes

and you hear a beep.

2.Enter the phone number you want to store (up to 16 digits).

3.Press mem and enter a number (1-9) on the keypad for the memory

location you want to use.

You hear a long beep and the talk LED goes out indicating the number has

been stored successfully.

If you select any keys other than 1-9, the handset will beep rapidly and

no number will be stored.

Entering a Pause in Memory Dialing

If you would like to use a phone number stored in memory to access voice

mail, for example, you can store a pause in the phone number sequence.

To use this function, follow steps 1 and 2 in Storing a Number in Memory,

then press the pause button on the handset to place a pause in the phone

number sequence.

Inhaltsverzeichnis

Andere Radio Shack Telefon Handbücher

Radio Shack

Radio Shack Big Button Phone Bedienungsanleitung

Radio Shack

Radio Shack TAD-734 Bedienungsanleitung

Radio Shack

Radio Shack ET-3507 Bedienungsanleitung

Radio Shack

Radio Shack ET-928 Bedienungsanleitung

Radio Shack

Radio Shack ET-238 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1028 Bedienungsanleitung

Radio Shack

Radio Shack 43-3260 Bedienungsanleitung

Radio Shack

Radio Shack 20-Number Memory Speaker Phone Bedienungsanleitung

Radio Shack

Radio Shack ET-894 Bedienungsanleitung

Radio Shack

Radio Shack 43-1301 Bedienungsanleitung

Radio Shack

Radio Shack ET-273 Bedienungsanleitung

Radio Shack

Radio Shack 43-3601 Bedienungsanleitung

Radio Shack

Radio Shack Caller Bedienungsanleitung

Radio Shack

Radio Shack 43-3703 Bedienungsanleitung

Radio Shack

Radio Shack 43-3908 Bedienungsanleitung

Radio Shack

Radio Shack 43-3910 Bedienungsanleitung

Radio Shack

Radio Shack ET-293 Bedienungsanleitung

Radio Shack

Radio Shack ET-501 Bedienungsanleitung

Radio Shack

Radio Shack 43-838 Bedienungsanleitung

Radio Shack

Radio Shack ET-296 Bedienungsanleitung

Radio Shack

Radio Shack ET-296 Bedienungsanleitung

Radio Shack

Radio Shack 43-3201 Bedienungsanleitung

Radio Shack

Radio Shack ET-893 Bedienungsanleitung

Radio Shack

Radio Shack 43-3818 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung