Radio Shack TAD-734 Bedienungsanleitung

Cat. No. 43-734

OWNER’S MANUAL

Please read before using this equipment.

TAD-734

900 MHz Cordless Speakerphone

Digital Answering System

with Caller ID

43-734.fm Page 1 Thursday, February 24, 2000 10:42 AM

FEATURES

Your RadioShack TAD-734 900 MHz

Cordless Speakerphone Digital Answer-

ing System combines a 900 MHz cord-

less telephone unit and a digital TAD

(Telephone Answering Device). The 900

MHz band means less interference,

clearer sound, and greater range than

46/49 MHz cordless telephones.

The Caller ID unit records each caller’s

telephone number (and name, if avail-

able in your area) and the date and time

of the call, as provided by your local

phone company to Caller ID service

subscribers. And, if you subscribe to

Call Waiting with Caller ID, the TAD-734

can show you the incoming caller infor-

mation, even when you are already on

the phone.

The TAD stores up to 18 minutes of

messages on a computer chip and

records each message’s day and time.

This gives you advanced capabilities

over tape-based answering machines

because you can delete individual mes-

sages and save the rest, and there are

no tapes to bother with and no tape

mechanisms to wear out.

The remote operation feature lets you

operate your TAD from a touch-tone

phone (or from a rotary phone with a

pocket tone dialer).

Telephone Features

10 Number Memory Dialing — lets you

store 10 numbers in memory for easy di-

aling.

Caller ID Memory — stores up to 30

Caller ID records.

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to rain

or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to

alert you to the presence of

uninsulated dangerous volt-

age within the product’s

enclosure that might be of suf-

ficient magnitude to consti-

tute a risk of electric shock.

Do not open the product’s

case.

This symbol is intended to

inform you that important

operating and maintenance

instructions are included in

the literature accompanying

this product.

RadioShack and COM-LOK are registered trademarks used by Tandy Corporation.

43-734.fm Page 2 Thursday, February 24, 2000 10:42 AM

3-Line Liquid Crystal Display — lets

you view an entire Caller ID record on

one screen.

Page — lets you send a paging signal

from the base to the handset to page

someone or locate the handset if you

misplace it.

40 Channels — automatically selects a

clear channel when you make or answer

a call. You can also manually change

channels during a call.

Security Access-Protection Code —

helps prevent other cordless phone us-

ers from using your phone line while the

handset is off the base.

Ringer Volume Control — lets you se-

lect from four ringer tone/volume set-

tings on the handset.

Volume Controls — let you adjust the

volume you hear through the handset.

Long Battery Life — the supplied bat-

tery pack (when fully charged) provides

about 7 hours of talk time or 7 days of

standby time.

COM-LOK®Security — ensures that

other cordless phone users cannot use

your phone line when the handset is on

the base.

Tone/Pulse Dialing — lets you use ei-

ther type of service, and you can easily

switch from pulse to tone dialing for

long-distance, bank-by-phone, or other

special services.

Auto Talk — you can set the phone so

you can answer a call simply by lifting

the handset from the base.

Any Key Answer — you can set the

phone so you can press any key to an-

swer a call when the handset is away

from the base.

Hearing-Aid Compatibility — lets you

use your phone with hearing aids that

have a T (telephone) switch.

TAD Features

Day/Time Stamp — records the day

and time each message was recorded.

Two Prerecorded Messages — gives

you the option of using one of two pre-

recorded outgoing messages or record-

ing your own.

Announcement Only — lets you play

an announcement for callers to hear,

without recording their messages.

Message Counter — shows the num-

ber of messages the TAD has recorded.

Programmable PIN — you can set a

two-digit personal identification number

(PIN) for secure remote operation.

Call Screening — lets you listen as a

caller leaves a message so you can de-

cide whether or not to answer the call.

Memo Recording — lets you leave

messages for yourself or others in your

home or office. You can also record your

phone conversation.

43-734.fm Page 3 Thursday, February 24, 2000 10:42 AM

Phone Pick-Up Detection — stops re-

cording when you pick up any phone on

the same line as the TAD, and resets to

answer the next call.

Adjustable Ring Number — lets you

set the TAD to answer after three or five

rings.

Toll-Saver — lets you avoid unneces-

sary charges when you call by long dis-

tance to check your messages.

Digital Volume Control — lets you pre-

cisely adjust the speakerphone and

message playback.

Important Caller ID Information

To use the phone’s Caller ID and Caller

ID with Call Waiting features, you must

be in an area where those services are

available and you must subscribe to

those services through your local phone

company.

Where Caller ID is offered, one or more

options are generally available:

• caller’s number only

• caller’s name only

• caller’s name and number

READ THIS BEFORE

INSTALLATION

We have designed your phone to con-

form to federal regulations, and you can

connect it to most telephone lines. How-

ever, each device that you connect to

the phone line draws power from the

phone line. We refer to this power draw

as the device’s ringer equivalence num-

ber, or REN. The REN is on the bottom

of the base.

If you are using more than one phone or

other device on the line, add up all the

RENs. If the total is more than five (three

in rural areas), your phones might not

ring. If ringer operation is impaired, re-

move a device from the line.

FCC STATEMENT

Your TAD-734 complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC registration number

and the REN to your phone company.

These numbers are on the bottom of the

base.

You must not connect your phone to any

of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

Note: Your telephone operates on stan-

dard radio frequencies, as allocated by

the FCC. Even though the security ac-

cess-protection code prevents unautho-

rized use of your phone line, it is

possible for other radio units operating

on similar frequencies within a certain

area to unintentionally intercept your

conversations and/or cause interfer-

ence. This lack of privacy can occur with

any cordless phone.

43-734.fm Page 4 Thursday, February 24, 2000 10:42 AM

CONTENTS

Installation ............................................................................................................... 7

Mounting the Phone ........................................................................................... 7

On a Desk Top ............................................................................................. 7

On a Wall Plate or Wall ................................................................................ 8

Connecting and Charging the Battery Pack ....................................................... 9

Setting the Dialing Mode .................................................................................. 10

Turning the Base’s Ringer On and Off ............................................................. 11

Setting the Ringer Tone/Volume ....................................................................... 11

Setting the Number of Rings ............................................................................ 12

Setting the Day/Time ........................................................................................ 12

Setting Auto Talk .............................................................................................. 13

Turning Caller ID/Call Waiting On/Off ............................................................... 13

Storing Your Area Code ................................................................................... 13

Telephone Operation ............................................................................................ 15

Making and Receiving Calls with the Handset ................................................. 15

Adjusting the Handset Volume ................................................................... 15

Selecting the Channel ...................................................................................... 15

Answering Calls with the Speakerphone .......................................................... 16

Switching Between the Handset and Speakerphone ................................. 16

Using Both the Handset and Speakerphone ............................................. 16

Using Flash ...................................................................................................... 16

Using Redial ..................................................................................................... 17

Using Tone Services on a Pulse Line ............................................................... 17

Paging .............................................................................................................. 17

Memory Dialing ................................................................................................ 18

Storing a Name and Number in Memory ................................................... 18

Editing or Deleting a Number in Memory ................................................... 19

Entering a Pause ....................................................................................... 19

Reviewing Memory Numbers ..................................................................... 19

Dialing a Memory Number ......................................................................... 20

Chain-Dialing Service Numbers ................................................................. 20

Testing Stored Emergency Numbers ......................................................... 20

Using a Headset ............................................................................................... 20

Caller ID Operation ............................................................................................... 21

Reviewing Caller ID Records ........................................................................... 21

Caller ID Messages ................................................................................... 22

Dialing Numbers from a Caller ID Record ........................................................ 22

Storing a Caller ID Record to Memory ............................................................. 22

Deleting Caller ID Records ............................................................................... 23

43-734.fm Page 5 Thursday, February 24, 2000 10:42 AM

TAD Operation ....................................................................................................... 24

Selecting the Outgoing Message ...................................................................... 24

Recording/Deleting an Outgoing Message ....................................................... 24

Setting the Record Time ................................................................................... 24

Setting the TAD to Answer Calls ...................................................................... 25

Screening Calls ................................................................................................ 25

Recording Incoming Messages ........................................................................ 25

Recording a Memo ........................................................................................... 25

Recording a Conversation ................................................................................ 26

Playing Messages ............................................................................................ 26

Adjusting the TAD’s Volume ............................................................................. 27

Deleting Messages ........................................................................................... 27

Setting the Remote Operation PIN ................................................................... 27

Remote Operation ............................................................................................ 28

Using the Toll-Saver ......................................................................................... 28

Using Remote Commands ............................................................................... 28

Remote Commands ................................................................................... 29

Troubleshooting .................................................................................................... 30

Care and Maintenance .......................................................................................... 32

Replacing the Battery Pack .............................................................................. 33

The FCC Wants You to Know ........................................................................... 34

Lightning ........................................................................................................... 34

43-734.fm Page 6 Thursday, February 24, 2000 10:42 AM

INSTALLATION

MOUNTING THE PHONE

You can place the TAD-734’s base on a

desk or table, mount it on a standard

wall plate, or mount it directly on a wall.

Choose a location that is:

• near an AC outlet

• near a modular telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the phone’s

range. If you have a choice of several lo-

cations, try each to see which provides

the best performance.

Cautions:

You must use a Class 2

power source that supplies

9V DC and delivers at least

350 mA. Its center tip must be set to

positive and its plug must fit the

TAD-734's DC IN 9V jack. The sup-

plied adapter meets these specifica-

tions. Using an adapter that does

not meet these specifications could

damage the TAD-734 or the adapt-

er.

• Always connect the AC adapter to

the TAD-734 before you connect it

to AC power. If you ever need to dis-

connect the TAD, disconnect the

adapter from AC power before you

disconnect it from the TAD-734.

Notes:

• Your telephone connects directly to

a modular telephone line jack. If

your phone line jack is not a modu-

lar jack, you can update the wiring

yourself, using jacks and adapters

available at your local RadioShack

store. Or, you can let the phone

company update the wiring for you.

• The USOC number of the jack to be

installed is RJ11C (RJ11W for a wall

plate).

On a Desk Top

1. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

2. Plug the modular cord’s other end

into a modular telephone line jack.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

43-734.fm Page 7 Thursday, February 24, 2000 10:42 AM

4. Route the adapter’s cord through

the strain relief slot on the bottom of

the base.

5. Plug the adapter into a standard AC

outlet.

6. Lift the base’s antenna to a vertical

position.

On a Wall Plate or Wall

1. Insert the two tabs at the top of the

narrow end of the supplied bracket

into the base’s upper tab slots as

shown, then press down on the

bracket’s latches and insert them

into the lower slots.

2. Plug one end of the supplied short

modular cord into the TEL LINE jack

on the back of the base as in Step 1,

“On a Desk Top” on Page 7.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack as

in Step 3, “On a Desk Top” on

Page 7.

4. Route the adapter and modular

cords through the grooves on the

bracket.

5. Plug the modular cord’s other end

into the wall plate jack, then align

the bracket’s keyhole slots with the

wall plate studs and slide the base

downward to secure it.

6. Plug the adapter into a standard AC

outlet.

7. Press and lift out the handset

holder, flip it over as shown, then

snap it back into place so it holds

the handset.

8. Lift the base’s antenna to a vertical

position.

43-734.fm Page 8 Thursday, February 24, 2000 10:42 AM

Note: To mount the TAD directly on a

wall, you need two screws (not supplied)

with heads that fit into the keyhole slots

on the bottom of the bracket.

Follow the steps under “On a Wall Plate

or Wall” on Page 8, then apply these ad-

ditional instructions for placement on a

wall.

1. Drill two holes 315/16

inches (100 mm)

apart. Then thread a

screw into each hole,

letting the heads

extend about 5/16

inch (8 mm) from the

wall.

2. Plug one end of the supplied long

modular cord into the TEL LINE jack

at the back of the base.

3. Align the bracket’s keyhole slots

with the mounting screws and slide

the base downward to secure it.

CONNECTING AND

CHARGING THE BATTERY

PACK

The TAD-734 comes with a recharge-

able nickel-cadmium battery pack in-

stalled in the handset, but not

connected. Before using your phone,

you must connect the battery pack, then

charge it for about 24 hours.

1. Press down and slide off the battery

pack compartment cover.

2. Lift the battery pack out of the com-

partment. Plug the battery pack’s

connector into the socket in the

compartment. The connector fits

only one way.

3. Place the battery pack in the com-

partment.

4. Replace the cover.

315/16

5/16

43-734.fm Page 9 Thursday, February 24, 2000 10:42 AM

To charge the battery pack, simply place

the handset on the base, facing either

up or down. The CHARGE/IN USE indi-

cator on the base lights and Total:00

appears on the handset display.

Recharge the battery pack when Low

Battery flashes on the display.

Important: Be sure the battery pack is

properly connected before you try to

charge it. The CHARGE/IN USE indica-

tor lights when the handset is on the

base, even if the battery pack is not con-

nected.

Notes:

• When you first use the phone after

charging or recharging the battery

pack, the phone might not work and

you might hear a five-beep error

signal. If this happens, return the

handset to the base for about 5

seconds. This resets the security

access-protection code.

• Using a pencil eraser, clean the

charging contacts on the handset

and the base about once a month.

• If the display is blank and the phone

does not work, recharge the battery

pack. (The battery power might be

too low to light the display.)

• If the battery pack becomes weak

during a call, the handset beeps

every 3 seconds and Low Bat-

tery flashes on the display. When

this happens, you cannot make

another call on the phone until you

recharge the battery pack.

• About once a month, fully discharge

the battery pack by keeping the

handset off the base until Low

Battery flashes on the display.

Otherwise, the battery pack loses its

ability to fully recharge.

• If the battery pack is completely dis-

charged or the base loses power

while the handset is away from it,

place the handset on the base to

reset the security access-protection

code. If it was the handset that lost

power, recharge the battery pack.

• The supplied battery pack should

last about a year. When it loses its

ability to fully recharge, order a

replacement battery pack through

your local RadioShack store (see

“Replacing the Battery Pack” on

Page 33).

SETTING THE DIALING

MODE

Set DIAL MODE on the back of the base

for the type of service you have. If you

are not sure which type you have, after

you charge the handset battery pack, do

this simple test.

43-734.fm Page 10 Thursday, February 24, 2000 10:42 AM

Andere Handbücher für TAD-734

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Telefon Handbücher

Radio Shack

Radio Shack 43-3901 Bedienungsanleitung

Radio Shack

Radio Shack ET-296 Bedienungsanleitung

Radio Shack

Radio Shack ET-294 Bedienungsanleitung

Radio Shack

Radio Shack 43-3201 Bedienungsanleitung

Radio Shack

Radio Shack ET-238 Bedienungsanleitung

Radio Shack

Radio Shack 43-140 Bedienungsanleitung

Radio Shack

Radio Shack Big Button Phone Bedienungsanleitung

Radio Shack

Radio Shack Big Button Phone Bedienungsanleitung

Radio Shack

Radio Shack 13-Memory Big-Button Telephone Bedienungsanleitung

Radio Shack

Radio Shack ET-148 Bedienungsanleitung

Radio Shack

Radio Shack 43-838 Bedienungsanleitung

Radio Shack

Radio Shack 43-883 Bedienungsanleitung

Radio Shack

Radio Shack 43-1107A Handbuch

Radio Shack

Radio Shack ET-273 Bedienungsanleitung

Radio Shack

Radio Shack Caller Bedienungsanleitung

Radio Shack

Radio Shack ET-296 Bedienungsanleitung

Radio Shack

Radio Shack ET-894 Bedienungsanleitung

Radio Shack

Radio Shack SYSTEM 612 Bedienungsanleitung

Radio Shack

Radio Shack System 1250 Bedienungsanleitung

Radio Shack

Radio Shack ET-3204 Bedienungsanleitung

Radio Shack

Radio Shack ET-205 Bedienungsanleitung

Radio Shack

Radio Shack 43-861 Bedienungsanleitung

Radio Shack

Radio Shack ET-177 Bedienungsanleitung

Radio Shack

Radio Shack ET-2105 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung