Radio Shack System 1250 Bedienungsanleitung

Cat. No. 43-986

OWNER’S MANUAL

Please read before using this equipment.

System 1250

Caller ID Telephone

with Call Waiting ID

43-986.fm Page 1 Monday, August 16, 1999 5:16 PM

FEATURES

Your RadioShack System 1250 Caller

ID Telephone combines a telephone

and a Caller ID unit in one system. It

shows the caller’s telephone number

(and name, if available in your area) and

the current date and time, as provided

by your local phone company to Caller

ID service subscribers. (The date and

time are updated with each incoming

call). It saves up to 60 Caller ID records

that you can review and call back.

And, if you have Call Waiting with Caller

ID, the System 1250 shows you the in-

coming caller information, even when

you are already on the phone.

Your System 1250 has these features:

3-Line Liquid Cr

stal Displa

— lets

you view an entire Caller ID record on

one screen.

Caller ID Memor

— stores up to 60

Caller ID records with name and number

or name only, depending on the informa-

tion your phone company provides.

Call Waitin

ID — displays Caller ID in-

formation about an incoming call when

you are on the phone (if you subscribe

to this service from your local phone

company).

New Call Indicator — lets you see at a

glance that you have new calls.

Trilin

ual — displays Caller ID messag-

es in English, French, or Spanish.

20-Number Memor

Dialin

— you

can store up to 20 numbers in memory

for easy dialing.

Headset Jack — lets you connect an

optional headset (available at your local

RadioShack store) for hands-free con-

venience.

Volume Control — lets you adjust the

volume of the sound you hear through

the handset.

Redial — lets you quickly redial the last

number dialed.

Flash — sends an electronic switch-

hook signal for use with special phone

services such as Call Waiting.

Hold — lets you put a call on hold.

ustable Rin

er Volume — lets you

set the ringer to low or high, or even turn

it off.

Review Scrollin

— lets you easily

scroll through all records in Caller ID

memory.

Callback — lets you dial the phone

number in a Caller ID record with the

touch of a button.

Pro

rammable Area Codes — lets you

store your local area code and up to two

others for easy local callback.

RadioShack is a registered trademark used by Tandy Corporation.

43-986.fm Page 2 Monday, August 16, 1999 5:16 PM

Message Waiting — lets you know that

you have received a voice mail message

(if you subscribe to a message waiting

service from your local telephone com-

pany).

Clock — shows the date and time as

provided to Caller ID service subscribers

by your local phone company. (Each in-

coming call updates the clock).

Tone/Pulse Dialing — lets you use ei-

ther type of service, and you can easily

switch from pulse to tone dialing for

long-distance, bank-by-phone, or other

special services.

Hearing-Aid Compatible — lets you

use the System 1250 with hearing aids

that have a T (telephone) switch.

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

We recommend you record the System

1250’s serial number here. The number

is on the bottom of the phone.

Serial Number: __________________

Important Caller ID Information

To use the phone’s Caller ID and Call

Waiting features, you must be in an area

where Caller ID and Call Waiting servic-

es are available and you must subscribe

to those services.

Where Caller ID is offered, one or more

options are generally available:

• caller’s number only

• caller’s name only

• caller’s name and number

To use the System 1250’s Caller ID

memory dial feature, you must receive

the caller’s number.

This symbol is intended to alert you to

the presence of uninsulated danger-

ous voltage within the product’s enclo-

sure that might be of sufficient

magnitude to constitute a risk of elec-

tric shock. Do not open the product’s

case.

This symbol is intended to inform you

that important operating and mainte-

nance instructions are included in the

literature accompanying this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

Warning: To prevent fire or shock

hazard, do not expose this prod-

uct to rain or moisture.

CAUTION

43-986.fm Page 3 Monday, August 16, 1999 5:16 PM

READ THIS BEFORE

INSTALLATION

We have designed your phone to con-

form to federal regulations and you can

connect it to most phone lines. However,

each device that you connect to the tele-

phone line draws power from the line.

We refer to this power draw as the

phone’s

ringer

equivalence

number

, or

REN. The REN is shown on the bottom

of your phone.

If you use more than one phone or other

device on the line, add up all the RENs.

If the total is more than five, your phones

might not ring. In rural areas, a total

REN of three might impair ringer opera-

tion. If ringer operation is impaired, re-

move one of the devices from the line.

FCC STATEMENT

Your telephone complies with Part 68 of

FCC Rules

. Upon request, you must

provide the phone’s FCC registration

number and REN to your telephone

company. These numbers are on the

bottom of the base.

Note: You must not connect your tele-

phone to:

• Coin-operated systems

• Party-line systems

• Most electronic key phone systems

43-986.fm Page 4 Monday, August 16, 1999 5:16 PM

CONTENTS

Preparation .............................................................................................................. 6

Installing a Backup Battery ................................................................................. 6

Mounting the Phone ........................................................................................... 7

On a Desk .................................................................................................... 7

On a Wall or Wall Plate ................................................................................ 8

Connecting the Handset ................................................................................... 10

Setting the Dialing Mode .................................................................................. 10

Setting the Ringer Volume ................................................................................ 10

Setting the Display Language .......................................................................... 11

Setting the Area Codes .................................................................................... 11

Setting the Display Contrast ............................................................................. 11

Telephone Operation ............................................................................................ 12

Setting the Handset’s Volume .......................................................................... 12

Using Redial ..................................................................................................... 12

Using Flash ...................................................................................................... 12

Using Hold ........................................................................................................ 13

Using Tone Services on a Pulse Line ............................................................... 13

Memory Dialing ................................................................................................ 14

Storing a Number in Memory ..................................................................... 14

Entering a Pause in a Memory Number ..................................................... 15

Dialing a Memory Number ......................................................................... 15

Chain-Dialing ............................................................................................. 15

Testing Stored Emergency Numbers ......................................................... 15

Using a Headset ............................................................................................... 16

Caller ID Operation ............................................................................................... 17

Caller ID Messages .......................................................................................... 18

Reviewing Caller ID Records ........................................................................... 19

Using Callback ................................................................................................. 19

Storing Caller ID Numbers in Memory .............................................................. 20

Deleting Caller ID Records ............................................................................... 20

Troubleshootin

.................................................................................................... 21

Care and Maintenance .......................................................................................... 22

The FCC Wants You to Know ........................................................................... 23

Lightning ........................................................................................................... 23

43-986.fm Page 5 Monday, August 16, 1999 5:16 PM

PREPARATION

INSTALLING A BACKUP

BATTERY

You can install an optional 9V backup

battery so if the AC power fails or you

unplug the phone ( appears), the Sys-

tem 1250 will save the memory numbers

and Caller ID records. We recommend

you use an alkaline battery, such as Ra-

dioShack Cat. No. 23-553.

Caution: Use only a fresh battery of the

required size and recommended type.

Follow these steps to install a battery.

1. Use a Phillips screwdriver to remove

the battery compartment cover’s

screw on the bottom of the system,

then remove the cover.

2. Place a fresh battery into the com-

partment as indicated by the polarity

symbols (+ and –) marked inside.

3. Replace the cover and secure it with

the screw.

The System 1250 automatically tests

the battery each time it receives a call. If

appears or the display dims, re-

place the battery.

Important: You must install the fresh

battery within 2 minutes after removing

the old battery. Otherwise, you might

lose the information stored in the

phone’s memory.

Cautions:

• Always remove old or weak batter-

ies. Batteries can leak chemicals

that can destroy electronic parts.

• Dispose of old batteries promptly

and properly. Do not burn or bury

them.

43-986.fm Page 6 Monday, August 16, 1999 5:16 PM

MOUNTING THE PHONE

You can place the phone on a desk or

table, mount it on a standard wall plate,

or mount it directly on a wall.

Select a location that is:

• Near an AC outlet

• Near a modular phone line jack

• Out of the way of normal activities

Notes:

• Your telephone connects directly to

a modular phone line jack. If your

phone line jack is not a modular

jack, you can update the wiring

yourself, using jacks and adapters

available from your local Ra-

dioShack store. Or, you can let the

telephone company update the wir-

ing for you.

• The USOC number of the jack to be

installed is RJ11C, or RJ11W for a

wall plate jack.

Caution: The supplied AC adapter was

designed specifically for your System

1250. Use only the supplied adapter.

On a Desk

1. Remove the mounting bracket by

holding in the tab on the right side of

the bracket and gently pulling out

the bracket.

2. Plug one end of the supplied long

modular cord into the phone jack on

the back of the phone.

3. Insert the supplied AC adapter’s

barrel plug into the DC 9V jack on

the back of the phone.

Phone

Jack

DC 9V

Jack

43-986.fm Page 7 Monday, August 16, 1999 5:16 PM

4. Route the adapter’s cord through

the strain relief slot on the back of

the phone.

5. Insert the bracket’s two small tabs

into the matching slots near the top

of the phone and snap the bracket

into place.

6. Plug the other end of the modular

cord into a modular phone line jack.

7. Plug the adapter into a standard AC

outlet.

Strain

Relief Slot

On a Wall or Wall Plate

Note: To mount the System

1250 directly on a wall, you

need two screws (not sup-

plied) with heads that fit the

keyhole slots on the bottom

of the phone. Drill two holes

315/16 inches (100 mm) apart.

Then thread a screw into

each hole, letting the heads

extend about 5/16 inch (7

mm) from the wall.

1. Remove the mounting bracket by

holding in the tab on the right side of

the bracket and gently pulling out

the bracket.

2. Insert the bracket’s two small tabs

into the matching slots near the bot-

tom of the phone and snap the

bracket into place.

5/16"

315/16"

43-986.fm Page 8 Monday, August 16, 1999 5:16 PM

3. Plug the supplied long modular cord

(or the short cord for a wall plate) in-

to the phone jack on the back of the

phone.

4. Insert the supplied AC adapter’s

barrel plug into the DC 9V jack.

5. If you are mounting the phone on a

wall plate, route the adapter cord as

shown. Plug the modular cord into

the wall plate jack, then align the

phone’s keyhole slots with the wall

plate studs and slide the phone

downward to secure it.

Phone

Jack

DC 9V

Jack

If you are mounting the phone on a

wall, route the adapter and modular

cords as shown. Align the phone’s

keyhole slots with the screws and

slide the phone downward to secure

it, then plug the modular cord into a

modular phone line jack.

6. Plug the adapter into a standard AC

outlet.

43-986.fm Page 9 Monday, August 16, 1999 5:16 PM

CONNECTING THE

HANDSET

Plug one end of the supplied coiled cord

into the modular jack on the left side of

the phone and the other end into the

modular jack on the handset. Then

place the handset on the base.

Note: Your local RadioShack store sells

a variety of longer coiled handset cords,

which are especially useful when you

mount the phone on the wall.

SETTING THE DIALING

MODE

Set T/P (Tone/Pulse) for the type of

service you have. If you are not sure

which type you have, do this simple test.

1. Be sure T/P is set to T.

2. Lift the handset and listen for a dial

tone.

3. Press any number except 0.

Note: If your phone system requires

that you dial an access code (9, for

example) before you dial an outside

number, do not press the access

code either.

If the dial tone stops, you have

touch-tone service. If the dial tone

continues, you have pulse service.

4. If you have pulse service, set T/P to

P. Otherwise, leave it set to T.

SETTING THE RINGER

VOLUME

RINGER controls the volume of the

phone’s ring. To adjust the ringer vol-

ume, set RINGER to HI or LO.

If you do not want the ringer to sound,

set RINGER to OFF. You can still make

calls with the ringer off, and you can an-

swer calls if you hear another phone on

the same phone line ring or if you see

the NEW CALL indicator flashing.

NEW CALL

Indicator

43-986.fm Page 10 Monday, August 16, 1999 5:16 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Telefon Handbücher

Radio Shack

Radio Shack 43-871 Bedienungsanleitung

Radio Shack

Radio Shack 17-918 Bedienungsanleitung

Radio Shack

Radio Shack 43-3904 Bedienungsanleitung

Radio Shack

Radio Shack ET-2105 Bedienungsanleitung

Radio Shack

Radio Shack 43-3201 Bedienungsanleitung

Radio Shack

Radio Shack 43-3261 Bedienungsanleitung

Radio Shack

Radio Shack CLEAR TRIM-FONE 43-858 Bedienungsanleitung

Radio Shack

Radio Shack ET-3204 Bedienungsanleitung

Radio Shack

Radio Shack ET-296 Bedienungsanleitung

Radio Shack

Radio Shack 43-3872 Bedienungsanleitung

Radio Shack

Radio Shack SYSTEM 612 Bedienungsanleitung

Radio Shack

Radio Shack ET-238 Bedienungsanleitung

Radio Shack

Radio Shack ET-205 Bedienungsanleitung

Radio Shack

Radio Shack ET-148 Bedienungsanleitung

Radio Shack

Radio Shack TRIM FONE ET-3222 Bedienungsanleitung

Radio Shack

Radio Shack ET-688 Bedienungsanleitung

Radio Shack

Radio Shack 43-3206 Bedienungsanleitung

Radio Shack

Radio Shack ET-652 Bedienungsanleitung

Radio Shack

Radio Shack 43-3241 Bedienungsanleitung

Radio Shack

Radio Shack 43-811 Bedienungsanleitung

Radio Shack

Radio Shack Contempra II Bedienungsanleitung

Radio Shack

Radio Shack Digital Spread Spectrum Speakerphone Bedienungsanleitung

Radio Shack

Radio Shack Big Button Phone Bedienungsanleitung

Radio Shack

Radio Shack 43-855 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung