Rangevision SPECTRUM Gebrauchs- und Pflegehandbuch

RANGEVISION

Setup and calibration

SPECTRUM

Contents
Contents 2
Introduction 3
Technicalspeciﬁcations 4
3Dresolution 4
Systemrequirements 4
Preparingforwork 5
Packagecontents 5
Installingsoftwareanddrivers 7
Settingupyourcomputerforworkwiththe scanner 8
Connectingprojector 8
Conﬁguringcomputerparameters 9
ScannerAssembly 10
Scannersetup 11
ScanCenterNGlaunch 11
Selectscanningzone 12
Calibrationﬁeldparameters 13
Placingthecalibrationplate 13
Initialsetupofcamerasandlenses 14
Checkingcameraarrangement 15
Findingaworkingdistance 15
Adjustmentoftheprojectorfocus 16
Bringingthecamerastogether 16
Finalcalibrationofthecameras 17
Calibratingthescanner 21
Calibrationplate 21
Fullcalibration 23
Fastcalibration(orientation) 25
Focus assessment during calibration 27
2

Introduction

ThankyouforchoosingRаngeVisiоnSpectrum!

PleasereadthismanualbeforeusingRangeVision3Dscanner.Herearedescribed the

procedures for preparing the scanner, installing the required drivers, calibration

procedure, scanning procedure,andtipsforacquiringhigh-quality three-dimensional

object model.

Informationmaybeamendedfromtimetotime.Thesechangeswillbeinserted into the

new versionsofthemanual,orintheadditionaldocumentsandpublications.

Technicalspeciﬁcations

Scanningzone

Scanning Area (WxHxD) (mm)

520*400*400

320*250*220

120*90*100

3Dpointaccuracy

0.12mm

0.06mm

0.04mm

Model

Spectrum

Resolutionofcameras

3Mpix

Diagonalofthematrix

1/2”

Texturescanning

Yes

3Dresolution

Scanningzone

3Dresolution

0.25mm

0.15mm

0.06mm

Operationdistance

1.05m

0.6m

0.3m

Systemrequirements

●operatingsystem-Windows7/8/1064bit,

●processor-IntelCorei3/i51.8GHzandbetter,

●graphicscardwithHDMIoutput,

●RAM-Notlessthan8GB,

●3 USB-ports.

Preparingforwork

Packagecontents

RаngeVisiоn3Dscannerissuppliedinaprotectedroadhardcase.Cameratripodis

placedinaseparatebag.

Thescannerisequippedwiththreescanningareas.Scanningareaisacalibrationplate

andstandforthecalibrationplate.

№

Name

qty.

Scanning module:

Installation construction with projector

Cable kit for connection to a PC (2 USB + HDMI)

Machine vision camera

Tripod

Calibration plate

Kit of optics

Stand for the calibration plate

USB disk with the software

License dongle

Power Cord 5 m

USB hub

Hex key

Rotary table + cables

Installingsoftwareanddrivers

Get the RаngeVisiоn software (equipped with the scanner) and run the installer -

RаngeVisiоn SсаnCenter setup.

Followingtheprompts,selectthedesiredlanguage,typeandpathforinstallation.

Aftertheﬁleshavebeencopiedinstalldriversandgraphicslibraries,necessaryfor

thecorrectoperationofRangeVision3Dscanner.

If you have access to the Internet RangeVision ScanCenter NG will automatically notify

you when updates are available. You can check for updates manually by clicking

About → Check for Updates.

Settingupyourcomputerforworkwiththe scanner

ForthecorrectoperationofRаngevisiоn3Dscanneryouwillneedtosetupyour

computer. Thisprocedureisperformedoncebeforetheﬁrstuseofthescanner.

Connectingprojector

TurnontheprojectorandconnectittotheHDMI-portofyourvideocard.After

connecting the projector,itshouldbedisplayedinthesystem.Ifthecomputer has

several videooutputs,deﬁnetheonetobeused.

1. Right click on the desktop, select Screen resolution,

2. Makesurethattheprojectorhasbeensuccessfullyrecognizedbythesystem

andthatbothconnectedscreensaredisplayed.

Conﬁguringcomputerparameters

Toavoidarecurrenceoftheproblemsduringthescanneroperation,youmustturn off

the screensaverandsleepmode.

Byclickingrightmousebuttononthedesktop,selectPersonalize→Screensaver and

turn off thescreensaver,disableturningoffthedisplayandputtingthe computer in sleep

mode.

ScannerAssembly

1. Mountthecamerasonthescanningmodule.

2. Installthescanningmoduleontripod.

3. ConnecttheprojectorwithHDMIcable.

4. ConnectcameraswithUSBcables.

5. Connectpowersupplyandturnontheprojector.

*old color variant with identical speciﬁcations is pictured

Andere Handbücher für SPECTRUM

Inhaltsverzeichnis

Andere Rangevision Scanner Handbücher

Rangevision

Rangevision NEO Gebrauchs- und Pflegehandbuch

Rangevision

Rangevision NEO Gebrauchs- und Pflegehandbuch

Rangevision

Rangevision Standard Plus Bedienungsanleitung

Rangevision

Rangevision Smart Fehlerbehebungshandbuch

Rangevision

Rangevision Smart Bedienungsanleitung

Rangevision

Rangevision SMART ScanCenter 2016.2 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung