Raptor 9764492 Bedienungsanleitung
raptor-products.com 1
Prod. No. 9764492
raptor-products.com
LINE LASER
GREEN 3 ×360°
Linjelaser grøn
Linjelaser, grønn
Linjelaser grön
Linjalaser vihreä
GB
2LINE LASER GREEN 3 × 360°
Supplied with:
• Multi-functional mount
• Li-Ion battery
• Charger + USB C cable
• Padded bag
• User manual
Characteristics
• 3 x 360° laser lines -> form 6 laser crosses
• Laser lines switchable separately
• Plumb function
• Laser plane distance to wall/ceiling min. 12 mm
• Wall/tripod mount
- Magnets on the back
- Strap attachement
- 5/8“ tripod connection
• Use with receiver (optional)
• Self-levelling function can be locked for manual use
• 5/8“ + 1/4“ connection at the instrument bottom
Technical data
Self-levelling range ± 3°
Accuracy ± 3 mm / 10 m
Laser diode / laser class green / 2
Working range without receiver 30 m* (radius)
Working range with receiver 60 m ** (radius)
Power supply Li-Ion
Operating time:
1x 360° 12 h
2 x 360° 9 h
3 x 360° 7 h
Temperature range -10°C - +45°C
Dust / water protection IP 54
Weight (instrument with batteries) 0,76 kg
*depending on the room illumination
**depending on the direction of the laser
raptor-products.com 3
GB
Power supply:
INSERT / CHARGE THE BATTERY
Open the battery compartment cover and insert the Li-Ion battery. Close the
battery compartment cover.
The battery status will be displayed by the ON/OFF LED of the laser:
When the LED starts ashing the battery must be recharged.
To charge the battery, remove it from the laser and charge it outside of the
instrument. When the battery is fully charged, insert it again. The red LED at
the battery shows that it is being charged.
When the charging is completed the LED will extinguisch.
Permanent power supply:
Connect the charging socket of the laser
with the USB cable and the charger
and connect it with a plug socket.
GB
4LINE LASER GREEN 3 × 360°
Functions and keypad:
raptor-products.com 5
GB
Operation:
Set up the laser:
1. Set up the laser on the oor direct
2. Set up the laser onto the multi-functional mount and x it to a tripod
3. Fix the magnets of the mount onto a magnetic surface (steel plate)
4. Set up the laser in a hanging position by means of the hole of the mount
5. Connect the laser to a column by means of the xing strap
POWER ON
Power on the laser by turning the ON/OFF lever in position ON. The instru-
ment is now ready for use. An audible and optical alarm (blinking lines) indi-
cates if the instrument was set up outside of the compensator range. Set up
the instrument on a more even surface.
To power off the instrument turn the ON/OFF lever back to the OFF position.
The instrument is now powered off.
NOTE:
During transport the ON/OFF lever
(compensator lock) must be set to OFF.
Disregard may lead to damages of
the compensator.
GB
6LINE LASER GREEN 3 × 360°
SWITCH THE LASER LINIES
Power on the laser and press button
H to switch on/off the horizontal laser
line.
Press button V to switch on the ver-
tical laser line V1.
Press button V once more to switch
on the vertical laser line V2.
Press button V again to switch on
both laser lines V1 and V2.
Press button V a fourth time =
switch off all vertical laser lines.
All laser lines switched on.
MANUAL FUNCTION
If the instrument is in OFF position press the button MANUAL function to
enter into the MANUAL mode; the ON/OFF LED is illuminated, the MANUAL
LED is blinking. Now the instrument can be used in slope mode, the compen-
sator alarm is off. All lines can now be switched as described above. Power
off the MANUAL function again with the button MANUAL function.
USE WITH RECEIVER
To prolong the working range or at unfavourable light conditions the laser
can be used with an optional receiver (not included in this kit).
Switch on the desired laser lines and press the button receivng mode at the
laser (the LED for the corresponding lines ashes).The selected laser lines
can now be deteced by the receiver (the visibility of the laser lines is weaker
in this mode).
By use of the receiver the working range can be extended up to 60 meters.
For more detailed inform-ation please see the user manual of the receivers.
Press the button receiving mode again to quit this mode.
raptor-products.com 7
GB
Safety notes:
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting windows;
after the instrument has been dropped or hit. Please check the accuracy.
Large uctuation of temperature: If the instrument will be used in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.
CARE AND CLEANING
Handle measuring instruments with care. Clean with soft cloth only after any
use. If necessary damp the cloth with some water. If the instrument is wet
clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in orig-
inal container / case only.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
It cannot be completely excluded that this instrument will disturb other instru-
ments (e.g. navigation systems); will be disturbed by other instruments (e.g.
intensive electromagnetic radiation nearby industrial facilities or radio trans-
mitters).
CE-CONFORMITY
The instrument has the CE mark according to EN 61010-1:2001 + corrig. 1+2.
WARRANTY
This product is warranted by the manufacturer to the original purchaser to
be free from defects in material and workmanship under normal use for a
period of two (2) years from the date of purchase. During the warranty pe-
riod, and upon proof of purchase, the product will be repaired or replaced
(with the same or similar model at manufacturers option), without charge for
either parts or labour. In case of a defect please contact the dealer where you
originally purchased this product. The warranty will not apply to this product
if it has been misused, abused or altered. Without limiting the foregoing, leak-
age of the battery, bending or dropping the unit are presumed to be defects
resulting from misuse or abuse.
GB
8LINE LASER GREEN 3 × 360°
EXCEPTIONS FROM RESPONSIBILITY
1. The user of this product is expected to follow the instructions given in the
user manual. Although all instruments left our warehouse in perfect condi-
tion and adjustment the user is expected to carry out periodic checks of
the product’s accuracy and general performance.
2. The manufacturer, or its representatives, assumes no responsibility of
results of a faulty or intentional usage or misuse including any direct,
indirect, consequential damage, and loss of prots.
3. The manufacturer, or its representatives, assumes no responsibility for
consequential damage, and loss of prots by any disaster (earthquake,
storm, ood etc.), re, accident, or an act of a third party and/or a usage
in other than usual conditions.
4. The manufacturer, or its representatives, assumes no responsibility for any
damage, and loss of prots due to a change of data, loss of data and
interruption of business etc., caused by using the product or an unusable
product.
5. The manufacturer, or its representatives, assumes no responsibility for any
damage, and loss of prots caused by usage other than explained in the
user manual.
6. The manufacturer, or its representatives, assumes no responsibility for
damage caused by wrong movement or action due to connecting with
other products.
INTENDED USE OF INSTRUMENT
The instrument emits a visible laser beam in order to carry out the following
measuring tasks (depending on the instrument): Setting up heights, horizontal
and vertical planes, right angles.
SAFETY INSTRUCTIONS
• Follow up the instructions given in the user manual.
• Do not stare into the beam. The laser beam can lead to eye injury. Looking
directly into the beam (even from greater distance) can cause damage to
your eyes.
• Do not aim the laser beam at persons or animals.
• The laser plane should be set up above the eye level of persons.
• Use the instrument for measuring jobs only.
• Do not open the instrument housing. Repairs should be carried out by
authorized workshops only. Please contact your local dealer.
raptor-products.com 9
GB
• Do not remove warning labels or safety instructions.
• Keep the instrument away from children.
• Do not use the instrument in explosive environment.
• The user manual must always be kept with the instrument.
LASER CLASSIFICATION
The instrument is a laser class 2 laser product according
to DIN IEC 60825-1:2014.
It is allowed to use the unit without further safety precautions.
The eye protection is normally secured by aversion responses and the blink
reex.
The laser instrument is marked with class 2 warning labels.
IEC 60825-1:2014
P ≤ 1 mW @ 515 - 530 nm
raptor-products.com
Laser
2
Please note:
If you return instruments for repair / for adjustment to us please discon-
nect batteries or rechargeable batteries from the instrument - this is for
safety reasons! Thank you.
All instruments subject to technical changes.
Correct disposal of this product
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
DK
10 LINJELASER GRØN
Leveres med:
• Multifunktions beslag
• Li-Ion batteri
• Oplader + USB-C kabel
• Polstret taske
• Brugervejledning
Egenskaber
• 3 × 360° laserlinjer -> danner 6 laserkryds
• Laserlinjer kan tændes separat
• Lodret-funktion
• Laserplanets afstand til væg/loft min. 12 mm.
• Væg-/stativmontering
- Magneter på bagsiden
- Fastgørelse af rem
- 5/8“ gevind
• Brug med modtager (ekstraudstyr)
• Selvnivellerende funktion kan låses ved manuel brug
• 5/8“ + 1/4“ forbindelse i instrumentets bund
Tekniske data
Interval for selvnivelleringsområde ± 3°
Præcision ± 3 mm / 10 m
Laserdiode/laserklasse Grøn/2
Arbejdsområde uden modtager 30 m* (radius)
Arbejdsområde med modtager 60 m ** (radius)
Strømforsyning Li-Ion
Driftstid:
1 × 360° 12 t
2 × 360° 9 t
3 × 360° 7 t
Temperaturområde -10°C - +45°C
Støv/vandbeskyttelse IP 54
Vægt (instrument med batterier) 0,76 kg
*afhængig af omgivelsesbelysningen
**afhængig af laserens retning
Inhaltsverzeichnis
Sprachen:
Andere Raptor Laser-Nivelliergerät Handbücher
Beliebte Laser-Nivelliergerät Handbücher anderer Marken
Nedo
Nedo ET-5 Bedienungsanleitung
geo-FENNEL
geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung
LaserLiner
LaserLiner X2-Laser Bedienungsanleitung
Spectra
Spectra LL300N Bedienungsanleitung
geo-FENNEL
geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung
Nedo
Nedo Crossliner 4 Bedienungsanleitung
