Raritan Dominion kx III Bedienungsanleitung

Dominion KX III User Station QSG

QSG

-KX3UST-1D-v3.1.0-E 255-62-0010-00 RoHS

Dominion KX III User Station

Thank you for purchasing Raritan's Dominion KX III User Station, a high-performance appliance dedicated to access

Raritan's enterprise-class Dominion KX III KVM-over-IP switches with anytime, anywhere access.

This Quick Setup Guide explains how to install and configure the Dominion User Station. For further details on using the

Dominion User Station, access online help from the application, or download the user guide from Raritan's

Support

page

(

http://www.raritan.com/support/

Package Contents

The Dominion User Station ships with the following contents.

•Dominion User Station

•Power adapter

•VESA mount kit

•Quick Setup Guide

•Warranty card

•L-type rackmount kit (optional)

Note: To mount the User Station in a 19-inch data center rack,

you must purchase the L-type rackmount kit from Raritan.

Refer to the online help or user guide for rackmount

instructions.

QS R ule

Front View

1. Microphone input 5. Power button

2. Audio output 6. SD card reader

3. Power LED 7. USB 2.0 ports

4. Hard disk LED

QS R ule

Rear View

1. RS232/RS422/RS485 7. USB 3.0 ports

2. RS232 8. USB 2.0 ports

3. Ventilation 9. DisplayPort (DP) video 1

4. DC power input 10. DisplayPort (DP) video 2

5. Gigabit LAN port 1 11. HDMI video

6. Gigabit LAN port 2 12. Connector for external

power button

QS R ule

Side View

1. Kensington Lock holes

QS R ule

QUICK SETUP GUIDE

Dominion KX III User Station QSG

QSG

-KX3UST-1D-v3.1.0-E 255-62-0010-00 RoHS

VESA Mount (Optional)

You can mount the Dominion User Station onto the back of a

monitor with 75 or 100 mm VESA standards.

Below shows the VESA MOUNT kit:

VESA mount procedure:

1. Turn OFF and disconnect all devices from the power

sources, including the monitor.

2. Attach the VESA mount securely to the back of your

monitor using four appropriate screws.

3. Align two screw holes on each side of the User Station

with those on the VESA mount.

4. Tighten two sides securely using four appropriate screws.

5. The Dominion User Station is now securely attached to the

monitor.

QS R ule

Step 1: Connect the Equipment

Only the basic hardware installation is described. For

additional connection information, refer to the user guide or

online help.

To make a basic connection:

1. Disconnect all devices from power.

2. Connect a USB keyboard and mouse to the front or rear

USB 2.0 ports.

3. Optional. Connect a microphone and speakers to the front

panel.

4. Connect the User Station to the network using either or

both LAN ports on the rear panel.

Dominion KX III User Station QSG

QSG

-KX3UST-1D-v3.1.0-E 255-62-0010-00 RoHS

5. Connect one or two monitors using either or both

DisplayPort ports, or the HDMI port.

Note 1: DisplayPort and HDMI transmit both video and

audio signals. Your monitors must support the audio

transmission if audio is intended.

Note 2: Only one or two monitors can be connected to the

User Station.

6. Power ON all devices.

QS R ule

Step 2: Log in to the Dominion User Station

Use the factory default user credentials for initial login. User

credentials are case sensitive.

To log in to the User Station:

1. Type the user name: admin

2. Type the password: raritan

Note: It is strongly recommended to change the factory

default password. See the online help or user guide for

instructions.

QS R ule

Step 3: Add KX III KVM Switches

If the User Station is connected to a non-DHCP network,

you must manually configure the network settings prior to

adding KX III KVM switches. See

Basic Network Settings

(on page 6).

When you are not using CC-SG integration, KX III KVM

switches are added in the User Station Configuration window.

To add KX III KVM switches:

1. Launch the User Station Configuration window using

either method below.

Press

Ctrl+Alt+C

Choose Main Menu > User Station Configuration. "Main

Menu" is located at the bottom-left corner of the

screen.

2. Click .

3. Enter the data for the KX III KVM switch.

Type the KVM switch's

IPv4/IPv6 address or

hostname in this field.

Select the authentication

method.

Normal: You must enter

KVM switch.

Allow LDAP single

sign-on: When users,

KVM switches, and the

Dominion User Station

have the same LDAP

environment, single

sign-on can be used.

Enter login credentials

for the KVM switch when

Normal is the chosen

authentication method.

4. Click to save.

5. Click Back to All KX Devices to go back to the list page.

Repeat to add more devices.

Dominion KX III User Station QSG

QSG

-KX3UST-1D-v3.1.0-E 255-62-0010-00 RoHS

Important: If "Allow LDAP Single Sign-on" is enabled, LDAP

users can omit entering credentials in favor of their LDAP

credentials being used. Otherwise, user credentials for a KVM

switch are saved on a per-user basis. Other users must enter

and save their own user credentials for the KVM switches you

added. See User Credentials for Querying Port Information.

QS R ule

Step 4: Access KVM Switches and KVM Ports

You access the computer devices connected to a KVM switch's

ports and your other targets through the Port Navigator

window, which contains 3 panels:

•Favorite Access shows the access you have configured as

favorites. See the User Station's online help or user guide

for configuration instructions.

•Devices shows all added KX III KVM switches and their

ports.

•Targets shows all added KVM, SSH, RDP and VNC targets.

This window is displayed by default. If not, launch it by

pressing

Ctrl+Alt+N

or choosing Main Menu > Port Navigator.

To access a KVM switch's ports:

1. Click a KVM switch in the Devices panel.

2. Per default, only a list of "up" ports is displayed under the

selected KVM switch. For dual port video, only the primary

port must be "up" to be displayed.

Numbers in parentheses are the physical port

numbers on the KVM switch.

Dual port video shows the primary then secondary

physical port numbers in parentheses.

3. Click the desired KVM port's icon , and select one

option below.



Open in new KVM client

: A new KVM Client window is

opened.



Open in current KVM client

: The port is launched into

the current KVM Client window.

Another alternative to access the KVM port is to click the

port's name, using any method below.

A "single" click opens it in the current KVM Client

window.

A "double" click or a single middle button click opens

it in a new KVM Client window.

A "right" click shows the KVM Client options.

QS R ule

Step 5: Use the KVM Client

The User Station's KVM Client window opens after accessing a

KVM port. The video of the target server that is connected to

the KVM port is displayed in the KVM Client. You can use the

attached keyboard and mouse to control the target server.

Dominion KX III User Station QSG

QSG

-KX3UST-1D-v3.1.0-E 255-62-0010-00 RoHS

A toolbar is available on the top of the KVM Client window for

helpful user operations and settings.

The toolbar is split into two groups.

The left group comprises the following buttons that you can

use to change settings and properties.

Button

Function

Connection Properties

This button manages streaming video

performance over

your

connection to the target

server. The settings are stored persistently for

the accessed KVM port.

In addition, this button can show information

like FPS and video resolution.

The factory default settings are ideal for most

connections so it is not recommended to

change the settings unless required.

Keyboard

This button shows a list of available hot key

macros and sends the selected macro to the

target server.

Mouse

This button switches between single mouse

and various dual mouse modes, or

synchronizes two mouse pointers onscreen.

Video Settings

This button adjusts video sensing and color

calibration settings.

Button

Function

Connect Audio, Mass Storage and SmartCard

Devices

This button connects or disconnects a virtual

media drive or a smart card reader from the

target server, if the target supports virtual

media.

For example, you can mount a CD-ROM or USB

flash drive onto the target server.

In addition, you can configure the audio

connection to the target server.

Power Operations

This button turns on, off or power cycles the

target server, if a Raritan PDU is connected to

the same KVM switch.

View

This button shows several display options, such

as Scale Video and Full-Screen Mode.

The right group comprises the following shortcut buttons for

frequently-used functions.

Button

Function

Synchronize Mouse

This button forces the target server's mouse

pointer to align with the User Station's in the

dual mouse modes.

Auto-sense Video

This button forces the video re-sensing to

adjust the video display.

Send Ctrl+Alt+Del

This button sends the hot key

Ctrl+Alt+Del

the target server to ensure it is interpreted by

that server.

Full-Screen Mode

This button displays the target server's video in

full screen.

Press

Ctrl+Alt+F

to quit the Full-Screen mode.

Fit window to Target

This button resizes the KVM Client window to

the target server's desktop video.

For detailed information on the toolbar buttons, see the online

help or user guide.

QS R ule

Dominion KX III User Station QSG

QSG

-KX3UST-1D-v3.1.0-E 255-62-0010-00 RoHS

Basic Network Settings

The User Station's default network configuration is set to

Automatic (DHCP) for both IPv4 and IPv6 settings.

This section describes basic network configuration only. Refer

to the online help or user guide for more information.

To configure basic network settings:

1. Choose Main Menu > System Settings > Network.

2. In the Network Connections dialog, two default network

connections are available for two LAN ports.

Ethernet 1

for LAN port 1, and

Ethernet 2

is for the other.

Select the desired one and click Edit.

3. Click the IPv4 Settings tab.

4. In the Method field, select one of the following options:



Automatic (DHCP)

: The DHCP server automatically

assigns an IPv4 address. This is the default.



Automatic (DHCP) addresses only

: The DHCP server

automatically assigns the IP address only. DNS comes

from manual input.



Manual

: This option configures static addressing. Click

Add to specify at least one IPv4 address, netmask and

gateway.



Disabled

: IPv4 networking is disabled.

5. Click OK.

QS R ule

Logout or Shutdown

To logout, shutdown, or restart, click Main Menu > Leave.

Restart is an option under Shutdown.

Shutdown option automatically shuts down in one minute if

the Restart option is not selected.

Warning: Do NOT turn the User Station off by holding down

the Power button or unplugging the power cord because

such operations may damage the User Station. A short

press of the Power button initiates a graceful shutdown

that does not save open KVM sessions.

QS R ule

Additional Information

For more information about Dominion User Station and the entire Raritan

product line, see Raritan's website (www.raritan.com). For technical issues,

contact Raritan Technical Support. See the Contact Support page in the Support

section on Raritan's website for technical support contact information

worldwide.

Raritan's products use code licensed under the GPL and LGPL. You can request a copy of the

open source code. For details, see the Open Source Software Statement at

(http://www.raritan.com/about/legal-statements/open-source-software-statement/) on

Raritan's website.

Andere Handbücher für dominion kx III

Inhaltsverzeichnis

Andere Raritan Schalten Handbücher

Raritan

Raritan Dominion LX Bedienungsanleitung

Raritan

Raritan Paragon II P2-UMT1664M Bedienungsanleitung

Raritan

Raritan DOMINION KSX II Bedienungsanleitung

Raritan

Raritan PARAGON II Series Bedienungsanleitung

Raritan

Raritan dominion kx III Bedienungsanleitung

Raritan

Raritan Dominion KX II Bedienungsanleitung

Raritan

Raritan SwitchMan USB-Combo SW2 Bedienungsanleitung

Raritan

Raritan MasterConsole CAT Bedienungsanleitung

Raritan

Raritan EMX2-888 Bedienungsanleitung

Raritan

Raritan MCC4 Bedienungsanleitung

Raritan

Raritan MasterConsole SMX18 Bedienungsanleitung

Raritan

Raritan MCIP116 Bedienungsanleitung

Raritan

Raritan PARAGON II Series Bedienungsanleitung

Raritan

Raritan MCC8 Bedienungsanleitung

Raritan

Raritan Dominion KX II Server KX2-432 Bedienungsanleitung

Raritan

Raritan TMCAT17 series Bedienungsanleitung

Raritan

Raritan DOMINION KX II DKX2-0E-E Bedienungsanleitung

Raritan

Raritan Switch Bedienungsanleitung

Raritan

Raritan PARAGON II Series Bedienungsanleitung

Raritan

Raritan dominion kx III Bedienungsanleitung

Raritan

Raritan DOMINION KSX - Bedienungsanleitung

Raritan

Raritan Dominion KX II Bedienungsanleitung

Raritan

Raritan DOMINION KSX II Bedienungsanleitung

Raritan

Raritan PX3TS Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung