Rayco FACE Bedienungsanleitung
RAYFace
3D Scanner
Model: RFS200
User Manual
RUG-3623-EN
Rev. 1.0
This user manual contains information on the appropriate use of RAYFace.
The operator must read this manual carefully before using the product.
The operator must follow instructions and safety regulations described in the user manual to
prevent any injury to the operator and damage to the product.
Copyright Ray Co., Ltd.
Publication number: RUG-3623-EN_Rev.1.0 (Revised Sep. 01, 2022)
This manual is subject to quality upgrade and specification change without prior notice.
For further inquiries, contact customer service of manufacturer.
Manufacturer: Ray Co., Ltd.
332-7, Samsung 1-ro, Hwaseong-si, Gyeonggi-do, 18380, Korea
Phone: +82-31-605-1000 FAX: +82-2-6280-5534
Customer Service: +82-1566-1526
www.raymedical.com
RAYFace Contents
Contents
User Manual Introduction ................................................................................6
Related Terms ............................................................................................................6
Symbols .....................................................................................................................6
Safety Information ......................................................................................................7
System Symbols.........................................................................................................7
Precautions for Installation .........................................................................................8
Precautions for Use ....................................................................................................9
Precautions for Power Connection..............................................................................9
Precautions for Cleaning the Product .......................................................................11
Label ........................................................................................................................ 11
Product Introduction ...................................................................................... 13
Usage.......................................................................................................................13
Intended use.............................................................................................................13
Components .............................................................................................................13
Sections and Functions (Scanner Body)...................................................................14
Sections and Functions (Calibration Kit) ...................................................................15
Installation.......................................................................................................17
Installation Environment ...........................................................................................17
Installation Setting...........................................................................................17
Working Environment ......................................................................................18
System Requirements ..............................................................................................19
Maintenance.............................................................................................................20
Maintenance ...................................................................................................20
Product Installation...................................................................................................21
Fix both left and right arms of main body .........................................................21
Connect Power................................................................................................22
Power On and Off............................................................................................23
Connect to Network.........................................................................................23
Network Setting Configuration.........................................................................24
Connect to PC.................................................................................................25
Assemble Calibration Kit .................................................................................26
Proceed with Calibration .................................................................................27
RAYFace Contents
Software Installation .................................................................................................28
RAYFace Screen Composition..................................................................................30
Register Scanner......................................................................................................31
Server Registration...................................................................................................34
RAYScan Server Registration..........................................................................34
RAYFace Server Registration..........................................................................37
Linked Program Registration ....................................................................................39
Operating Software......................................................................................... 42
Register Subject .......................................................................................................42
Capture ....................................................................................................................43
Capture ...........................................................................................................43
Capture Options ..............................................................................................46
Captured Data Management.....................................................................................50
Validate Captured Data ...................................................................................50
Unreconstructed Data Management ................................................................52
Reconstructed Data Management ...................................................................54
Move Captured Data .......................................................................................58
Export Captured Data......................................................................................59
Import Captured Data......................................................................................61
Deleted Data Management..............................................................................64
Settings ....................................................................................................................66
General Settings .............................................................................................66
Device Settings ...............................................................................................74
Status Indicator ..............................................................................................80
RAYFace Indication ..................................................................................................80
Appendix A. Product Specifications.................................................................. 81
Appendix B. Messages .......................................................................................82
Appendix C. Regulations ....................................................................................90
RAYFace 1. Introduction
5
Introduction
1
RAYFace 1. Introduction
6
User Manual Introduction
The following user manual contains not only a specific step-by-step guide on how to use RAYFace
(referred to as “the product”), but also the basic information regarding the product.
1) Please keep this manual for future reference.
2) Please read the safety regulations before using the product.
3) The pictures on the user manual might differ from actual ones depending on the option
and model of the product.
4) The screenshot on the user manual might differ from actual ones depending on the
software version of the product.
Related Terms
Some terms used in this manual may be used interchangeably as follows.
1) RAYFace is a software to operate RAYFace.
2) “Scanner” refers to the main body of RAYFace.
3) Left scanner, center scanner, and right scanner refers to the 3 cameras of RAYFace.
Symbols
Indicates a hazardous situation that, if the instructions are not followed, could
result in death or serious injury.
Indicates a hazardous situation that, if the instructions are not followed, could
result in minor or moderate injury.
Indicates information considered important but not hazardous.
RAYFace 1. Introduction
7
Safety Information
The following safety information must be read and understood before using the product. Please
check the safety precautions to use it safely and correctly. Improper use of the product may cause
bodily injury or death.
The owner of the product must ensure that all precautions, safety measures and
maintenance procedures are performed.
Use only genuine parts approved or provided by the manufacturer in this product.
Service and repairs due to equipment failure caused by not using genuine
products are not covered under the warranty.
Do not modify or alter the device unless authorized by the manufacturer.
System Symbols
The symbols used in the device.
CE Mark.
UL Mark.
RCM Mark.
Power symbol.
Device serial number.
The symbol indicates that the product may include industrial waste materials.
Do not look into the beam. (This product is classified as Risk Group 2 (RG2) of
IEC 62471-5).
RAYFace 1. Introduction
8
Precautions for Installation
Risk of electric shock or fire
▪Do not install the product in humid or dusty place or where moisture can accumulate.
▪Do not put candles, lighters, etc. on the product or install the product near heating
appliance.
▪Do not use the product near flammable sprayer or substances.
▪Do not install the power cord where it is difficult to remove.
Risk of malfuction, equipment failure, or bodily injury
▪Install the product on a safe and flat surface with no risk of falling.
▪Do not install the product in a place exposed to direct sunlight or ultraviolet (UV) light.
▪Do not install the product where vibration or strong shock might occur.
▪Install the product in a place that meets the operating temperature conditions.
▪Use the product at temperature between 10°C to 35°C / 50°F to 95°F.
▪Install the product in a well-ventilated area to allow heat release from the product for
cooling.
▪Do not install near an object that generates a magnetic field such as motor.
▪Do not turn the product upside down or lay it down when moving.
▪Remove the power cord after pressing the power button to turn it off when moving.
▪Do not install in a place where there is a strong light directly to the front of the product.
▪Do not install in a place where there is a strong light directly to the subject's face or
background.
▪Install where there is a normal white fluorescent light or LED light.
▪When installing near a window, cover the window with blinds or curtains.
RAYFace 1. Introduction
9
▪Install it 10cm away from the end of the table.
Leaving a BATTERY in an extremely high temperature surrounding environment
can result in an EXPLOSION or the leakage of flammable liquid or gas.
A BATTERY subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
Risk of fire or explosion if the battery is replaced by an incorrect type. Dispose of
used Batteries according to the instructions.
▪Use appropriate for the Storage environment and Operation environment conditions of
the product.
Precautions for Use
Risk of malfuction, equipment failure, or bodily injury
▪Do not place heavy objects on top of the product.
▪Do not disconnect the power cord during operation.
▪If used in a manner not specified by the manufacturer, the protection function may be
impaired.
▪The recommended illuminance level for the subject location is 500 ~ 1,500 Lux.
▪Do not look into the beam. This product is classified as Risk Group 2 (RG2) of IEC
62471-5.
Precautions for Power Connection
Risk of electric shock or fire
▪Do not use loose power outlets or damaged power cord.
▪Do not touch the power cord with wet hands.
▪Grasp the power cord and pull to disconnect, and avoid pulling out of the cable line.
▪Remove the power cord during a thunderstorm.
RAYFace 1. Introduction
10
▪Do not place objects (chemicals, water containers, and little metallic objects such as
tweezers) near the product.
▪Remove the power cord if the product emits strange sound, smell, or smoke and contact
the seller.
▪Use with a rated voltage.
▪Use an outlet (or multi-outlet) with a ground terminal that meets the rated
voltage/current.
▪Do not bend excessively or damage the power cord.
▪Remove the power cord when the product is not in use for an extended period of time.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
