RAYLASE MINISCAN II-07 Bedienungsanleitung

-AXIS DEFLECTION UNITS

Translation of the original manual

MINISCAN II

-07, MINISCAN II-10, MINISCAN II-14, MINISCAN II-20

This manual has been created by RAYLASE for its customers and employees.

RAYLASE reserves the right to modify the product described in this manual and the information it contains

by photocopying, scanning or photographing – and any other form of reproduction is only permitted with

the prior written approval of RAYLASE.

Information correct at: 2018/01

CONTENTS

2017 RAYLASE GmbH MINISCAN II

MN102

-en / v1.0.3

CONTENTS

1ABOUT THIS MANUAL__________________________________ 5

1.1 Basic information .................................................................................................................5

1.2 Display conventions.............................................................................................................5

1.3 Other applicable documents................................................................................................5

1.4 Manufacturer........................................................................................................................6

1.5 Customer service.................................................................................................................6

1.6 Warranty ..............................................................................................................................6

2GENERAL SAFETY INFORMATION ______________________ 7

2.1 Designated use....................................................................................................................7

2.2 Foreseeable misuse ............................................................................................................7

2.3 Classification of laser systems.............................................................................................8

2.4 Laser area............................................................................................................................9

2.5 Hazards due to laser radiation...........................................................................................10

2.6 Required training and instruction of operating personnel..................................................11

2.7 Required protection measures ..........................................................................................11

2.8 Behaviour in case of destroyed ZnSe lenses....................................................................11

3PRODUCT DESCRIPTION______________________________12

3.1 Items included, accessories and spare parts ....................................................................12

3.2 General description............................................................................................................12

3.3 Product versions................................................................................................................15

3.4 Example uses ....................................................................................................................15

3.5 Signage..............................................................................................................................16

3.6 Technical data ...................................................................................................................17

3.7 Lifespan .............................................................................................................................21

4INSTALLATION _______________________________________22

4.1 Safety during installation....................................................................................................22

4.2 Installation location............................................................................................................23

4.3 Preparing for installation....................................................................................................23

4.4 Installing the lens...............................................................................................................23

4.5 Installing the deflection unit ...............................................................................................23

4.6 Completing installation.......................................................................................................23

5START-UP ____________________________________________24

5.1 Safety during start-up and operation .................................................................................24

5.2 Checking the installation....................................................................................................25

5.3 Start-up..............................................................................................................................25

CONTENTS

2017 RAYLASE GmbH MINISCAN II

MN102

-en / v1.0.3

6MAINTENANCE _______________________________________26

6.1 Cleaning.............................................................................................................................26

6.2 Servicing............................................................................................................................27

7UNINSTALLING _______________________________________28

7.1 Safety when uninstalling....................................................................................................28

7.2 Uninstalling the deflection unit...........................................................................................28

8STORAGE ____________________________________________29

9TRANSPORTATION ___________________________________30

10 DISPOSAL____________________________________________31

11 TROUBLESHOOTING__________________________________32

INDEX ____________________________________________________33

1 ABOUT THIS MANUAL

2017 RAYLASE GmbH MINISCAN II

MN102

-en / v1.0.3

1ABOUT THIS MANUAL

1.1 Basic information

This manual provides general information about handling MINISCAN II series deflection units. In

subsequent chapters, the general designations “deflection unit” or “product” are used to refer to the

MINISCAN II. The product version is indicated by the type code on the rating plate (see page16,

Signage).

This manual contains important information about professional and safe handling of the deflection

unit. As a result, you should familiarise yourself with the content of this manual before starting to use

the deflection unit. In case of any queries, please contact RAYLASE Customer Service for information

(see page 6, Customer service).

The manual must be accessible to anyone involved in developing, installing, uninstalling or using a

laser system with a RAYLASE deflection unit. If the deflection unit is sold on, this manual or an

authorised copy must be passed on with it.

1.2 Display conventions

The signal word WARNING indicates hazards that can lead to injuries or damage unless

precautionary measures are taken.

The signal word NOTE indicates general precautionary measures to be observed when handling the

product to prevent damage to the product itself.

Bullet points in a list are shown with a square at the beginning of the line.

Instructions are introduced with an objective and are shown with numbered actions. If necessary, an

intermediate result and a final result are specified.

1. First instruction

2. Second instruction

An intermediate result is represented by an arrow symbol.

3. Further instruction

An end result is represented by a tick.

1.3 Other applicable documents

Declaration of incorporation

Production log

Manuals for optional accessories

1 ABOUT THIS MANUAL

2017 RAYLASE GmbH MINISCAN II

MN102

-en / v1.0.3

1.4 Manufacturer

RAYLASE GmbH

Argelsrieder Feld 2+4

82234 Wessling

Germany

T: +49.8153.88 98-0 | F: +49.8153.88 98-10

www.raylase.de | info@raylase.de

Referred to in this text as RAYLASE.

1.5 Customer service

The USB stick supplied contains the manual and answers numerous questions about RAYLASE

products. If any questions are not answered, RAYLASE Customer Service will be pleased to assist:

Monday to Friday between 08:00 and 17:00

Germany (Wessling)

T: +49.8153.88 98-0 | F: +49.8153.88 98-10

support@raylase.de

China (Shenzhen)

T: +86.755.2824-8533 | F: +86,755.8222-8193

info@raylase.cn

1.6 Warranty

The customer's rights in the event of any material or legal defects in the product are set out in

RAYLASE’s general terms and conditions of business. These can be viewed at:

https://www.raylase.de/en/terms-and-conditions.html

RAYLASE GmbH has no obligation to repair any defects occurring under the following circumstances:

If the product has been operated outside the specifications.

If unauthorised repairs have been carried out on the product.

If unauthorised modifications have been made to the product.

If the product has been connected to non-compatible devices.

If the product has been damaged by unacceptably high laser power or by focusing the laser on

optical surfaces.

If the product has been damaged by unqualified cleaning of the optics.

If the warranty has elapsed.

There is no implicit guarantee or warranty regarding suitability for particular purposes. RAYLASE is not

responsible for damage resulting from the application. Individual assemblies or other assemblies

manufactured by RAYLASE may be subject to different warranty terms. Further information can be

found in the corresponding manuals.

2 GENERAL SAFETY INFORMATION

2017 RAYLASE GmbH MINISCAN II

MN102

-en / v1.0.3

2GENERAL SAFETY INFORMATION

2.1 Designated use

The deflection unit is intended to deflect laser radiation within an appropriate operating range for the

purposes of material processing.

The deflection unit is designed as a sub-assembly for laser systems and is classed as an incomplete

machine as defined in the Machine Directive. Each product version may only be operated with the

wavelength specified in the type code and with the specified beam diameter (see page 16, Signage).

Depending on the version, the MINISCAN II is designed for lasers with wavelengths of 193 nm to

11,000 nm, and an input aperture of 7, 9, 14 or 20 mm.

2.2 Foreseeable misuse

Foreseeable misuse includes the following:

Use of the deflection unit outside the specifications set out in this manual (see page 17, Technical

data).

Failure to comply with generally recognised technical regulations, as well as electrical engineering,

optical mechanical and laser technology directives, laws and standards.

Lack of or unsuitable fume extraction during material processing.

Lack of or unqualified process monitoring during material processing.

Use of the deflection unit with unsuitable laser protection measures.

Working on the deflection unit without or with unsuitable protective equipment.

Processing of flammable materials.

Installation, operation, maintenance and repair by unqualified personnel.

2 GENERAL SAFETY INFORMATION

2017 RAYLASE GmbH MINISCAN II

MN102

-en / v1.0.3

2.3 Classification of laser systems

The deflection unit can be installed on a range of different laser systems. Every laser system is assigned

to a laser class, which must be specified at the output location of the laser radiation (e.g. using a laser

warning sign).

The following laser classes are defined in DIN EN 60825-1 and described in DGUV Regulation 11:

Class Description

1 The accessible laser radiation is not dangerous under reasonably foreseeable conditions.

1M The accessible laser radiation is in the wavelength range 302.5 nm to 4,000 nm. The accessible laser

radiation is not dangerous to the eyes, provided the beam cross-section is not reduced by optical

instruments (e.g. magnifiers, lenses, telescopes).

2 The accessible laser radiation is in the visible spectral range (400 nm to 700 nm). Short exposure times

(up to 0.25 s) are not dangerous to the eyes. Additional beam components outside the wavelength

range 400 nm to 700 nm meet the conditions for Class 1.

2M The accessible laser radiation is in the visible spectral range 400 nm to 700 nm. Short exposure times

(up to 0.25 s) are not dangerous to the eyes, provided the beam cross-

section is not reduced by optical

instruments (e.g. magnifiers, lenses,

telescopes). Additional beam components outside the wavelength

range 400 nm to 700 nm meet the conditions for Class 1M.

3R The accessible laser radiation is in the wavelength range 302.5 nm to 106nm and is dangerous to the

eyes. The power or energy is a maximum of five times the permitted Class 2 radiation limit in the

wavelength range 400 nm to 700 nm and five times the Class 1 limit for other wavelengths.

3B The accessible laser radiation is dangerous to the eyes and frequently also to the skin.

4 The accessible laser radiation is very dangerous to the eyes and dangerous to the skin. Diffusely

scattered radiation can also be dangerous. The laser radiation can cause a risk of fire and explosion.

Note that the deflection unit changes the beam output location of the laser system. The new beam

output must be indicated by a laser warning sign on the deflection unit, stating the corresponding

classification.

The use of a deflection unit can change the laser system’s laser class. This can necessitate additional

protective measures.

2 GENERAL SAFETY INFORMATION

2017 RAYLASE GmbH MINISCAN II

MN102

-en / v1.0.3

2.4 Laser area

For the purposes of accident prevention, the laser area refers to the area in which the maximum

permitted radiation value can be exceeded. Laser systems must be assigned and marked according to

their laser class and use.X2-010.1

With a corresponding beam intensity, the laser area is defined by the total radiation angle of the

deflection unit and by the reflection of all objects that can be irradiated by it. It is important to note

that, in addition to reflective surfaces, matt and dark surfaces can also reflect laser radiation and that a

laser beam reflected several times can still be dangerous. In addition, the deflection unit can be

destroyed by back reflection.X2-010. 2

The laser area must have permanently and legibly attached markings in accordance with

DIN EN 60825-1. Laser systems must be fitted with the protective mechanisms required for safe

operation according to their class and use.X2 -010 .3

No combustible or explosive objects and liquids may be located in the laser area, as the energy of the

laser beam could ignite them.X2 -010.4

1 Laser 5 Deflected laser beam

2 Protective housing 6 Reflected laser beam

3 Beam stop or attenuator (shutter) 7 Laser area

4 Deflection unit 8 Processing area (example)

Fig. 1: Laser area

2 GENERAL SAFETY INFORMATION

2017 RAYLASE GmbH MINISCAN II

MN102

-en / v1.0.3

2.5 Hazards due to laser radiation

WARNING

This chapter describes hazards that can result due to interaction with the higher-level laser system.

The operator of the higher-level laser system is responsible for safe operation and for securing the

surrounding area to prevent hazards that can be caused by laser radiation. They must ensure

compliance with all applicable conditions, regulations, laws, standards and directives.X2-020

2.5.1 General safety measures

The following general safety measures are to be observed:

To ensure that the laser beam is immediately switched off in the event of a fault, the laser process

must always be monitored. Alternatively, the entire beam path can be in a radiation-proof housing.X2-030 .1

The laser system must be designed in such a way that the laser beam can only be emitted at the

beam output on the deflection unit.X2-030.2

Appropriate protection mechanisms must be in place to prevent unauthorised activation or use of

the laser system.X2-030.3

The maximum permitted input beam diameter may not be exceeded.X2-03 0.4

If the materials to be processed can result in toxic vapours, safe extraction of these must be

ensured. Oxidising material processing and processing with material removal that is precipitated

onto the optics must be handled properly.X2-030.5

2.5.2 Measures to prevent uncontrolled escape of laser radiation.

If the mirrors in the deflection unit are destroyed, the laser beam no longer exits the deflection unit at

the intended beam output but remains inside the deflection unit. This leads to heating and, in some

cases, destruction of the housing and can lead to uncontrolled escape of the laser beam.X2 -040

To prevent destruction of the mirrors, the following points must be observed:

At the laser beam input, it is essential that the laser beam strikes the centre of the mirrors. If the

laser beam strikes a mirror towards the edge, the mirror can be overheated and destroyed.X2-040.1

To prevent a loss of control, the plug connections to the deflection unit may only be disconnected

when the laser system and the power supply are switched off.X2 -04 0.2

The deflection unit should always be operated with a lens or protective window.X2-040. 3

The maximum permitted laser power may not be exceeded.X2 -040.4

The deflection unit must be installed in such a way that the mirrors cannot come into contact with

liquids. Liquids change the reflective properties of the mirrors, which can lead to them being

destroyed by the laser beam.X2-040. 5

Before processing highly reflective materials, RAYLASE must be contacted as reflections can lead to

the destruction of the deflection unit.X2-040 .6

In general, correct and careful handling of the optical components must be ensured, particularly

during maintenance and cleaning work. Contaminated or scratched optics can absorb

unacceptable amounts of laser power and thus be destroyed.X2-040.7

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere RAYLASE Scanner Handbücher

RAYLASE

RAYLASE SUPERSCAN II-10 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung