Reach CH50 Bedienungsanleitung

! !
!©!!
Reach Video Conference Recorder
CH50
User Manual
Document Version
V1.0
Released Date

Reach!CH50!
User!Manual!
Copyright© SZ REACH TECH CO., LTD.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2
SZ REACH TECH CO., LTD provides full technical supports for the customers. If
you have any inquiries, please contact the local Reach office or directly contact the
headquarters of the company.
SZ REACH TECH CO., LTD.
Address:
Room 601, Building B, Kingdee Software Park, No. 2, 12th
South Road, Hi-Tech Industrial Park, Nanshan District,
Shenzhen, Guangdong, China
Postal code:
518057
Website:
http://www.szreach.com
Tel.:
+86 755 86073600
Customer service hotline:
+86 4007160868
Customer service fax:
+86 755 86073689
Copyright© SZ REACH TECH CO., LTD. 2014. All rights reserved.
Any part of this document, including the text, image and graph, is the property of SZ
REACH TECH CO., LTD. No part of this document shall be copied in any means without
the prior written consent of SZ REACH TECH CO., LTD. Reach reserves the right to
revise this document without any prior notice.
Reach provides warranty of limited liabilities for the software and hardware product.
For any loss of the users caused by the design defect of the software and hardware,
Reach will compensate the users with the amount up to the price specified in the product
purchase contract.
Trademark Statement
Reach, REACH, , Reach Software, Beyonsys™ and Powolive™ are the
trademarks of SZ REACH TECH CO., LTD. Windows, Windows 95, Windows 98,
Windows NT, Windows 2000, Windows 2003, Windows XP and Windows 7 are the
trademarks of Microsoft. Other trademarks are the properties of their respective owners.

Reach!CH50!
User!Manual!
Copyright© SZ REACH TECH CO., LTD.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 3
Note:
This user manual is compiled to ensure easy installation and configuration of the
product. Please read this manual carefully before using the product, so that you can make
best use of all its functions.
This manual is subject to update from time to time without prior notice. If you come
across any problem that cannot be solved according to the manual, please contact our
company for solutions. Thank you.

Reach!CH50!
User!Manual!
Copyright© SZ REACH TECH CO., LTD.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 4
Contents
1!OVERVIEW!....................................................................................................................!1!
1.1!INTRODUCTION!.........................................................................................................!1!
1.2!APPEARANCE!...........................................................................................................!1!
1.3!NETWORKING DIAGRAM!...........................................................................................!2!
2!OPERATION GUIDE!.....................................................................................................!3!
2.1!CONFIGURING IP ADDRESS FOR THE LAN INTERFACE!..........................................!3!
2.2!LOGGING IN TO CH50 THROUGH THE LAN INTERFACE!.........................................!4!
2.3!CONFIGURING TEMPLATES!......................................................................................!5!
2.4!TASK MANAGEMENT!..............................................................................................!10!
2.5!FILE MANAGEMENT!................................................................................................!11!
2.6!USER GROUP MANAGEMENT!................................................................................!12!
2.7!USER MANAGEMENT!..............................................................................................!13!
2.8!SETTING SYSTEM PARAMETERS!...........................................................................!14!
2.9!VIEWING SYSTEM LOG!...........................................................................................!16!
2.10!VIEWING SYSTEM INFORMATION!...........................................................................!16!
2.11!SYSTEM UPGRADE!.................................................................................................!17!
2.12!QUIT!.......................................................................................................................!18!
3!COMPATIBLE DEVICE!..............................................................................................!19!
4!FAQS!.............................................................................................................................!20!

Reach!CH50!
User!Manual!
Copyright© SZ REACH TECH CO., LTD.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 1
Overview1
Introduction1.1
The video conference recorder CH50 is the latest generation multimedia recording
and streaming device for the video conferencing industry. CH50 can work in coordination
with all MCUs and terminals based on H.323 standard to record multiple meetings in
various speed and different modes. In addition, CH50 provides various functions including
live streaming, VOD, remote management and file management. With the characteristics
of simple operation, stable performance and easy maintenance, CH50 can meet the
requirement of capturing, streaming and sharing of visual information in the conference,
training and teaching scenarios.
Appearance1.2
Figure 1-1 shows the appearance of CH50.
Figure 1-1 Appearance of CH50
Figure 1-2 shows the interfaces at the rear of CH50.
Figure 1-2 Rear View of CH50

Reach!CH50!
User!Manual!
Copyright© SZ REACH TECH CO., LTD.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2
1
Power Fan
2
Power Interface
3
Power Switch
4
Motherboard Fan
5
COM
6
LAN
7
WAN
Networking Diagram1.3
As shown in the figure below, CH50, MCU and video conferencing terminal are in the
same network, and use H.232 and SIP protocol for mutual communication. Once a video
conference begins, CH50 is enabled to start the recording.
CH50 records the bit streams sent from the MCU and video conferencing terminal.
Users can log in to CH50 through the Web interface to view the conference in live or
VOD mode and download the recorded file.

Reach!CH50!
User!Manual!
Copyright© SZ REACH TECH CO., LTD.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 3
Operation Guide2
Configuring IP Address for the LAN Interface2.1
1. Use the network cable to connect PC to the WAN interface of CH50.
2. Modify or add the IP address of PC to be 10.10.10.X (X is any integer from 1 to
254, except 10), with the subnet mask 255.255.255.0.
The IP address for the WAN interface of CH50 is 10.10.10.10 (and it cannot be
changed), so the IP address of PC connected to this WAN interface should be in
the same network segment (10.10.10.X).
3. Input http//10.10.10.10:800 in the address bar of the Web browser (for
example, Internet Explorer) and then press Enter.
The login page is displayed as follows.
4. Input the username and password, and click LOGIN to log in to CH50.
By default, the username is admin and the password is 1234.
5. Click the IP menu at the left side of the page.
The IP Address page is displayed.

Reach!CH50!
User!Manual!
Copyright© SZ REACH TECH CO., LTD.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 4
6. Set IP Address, Netmask and Gateway for LAN1 at the right side of the page.
LAN1 corresponds to the LAN interface of the device.
7. Click Submit.
CH50 reboots automatically to enable the IP address of the LAN interface. It
takes about two minutes for the whole reboot process.
Use the network cable to connect the LAN interface of CH50 to Local Area
Network, and start CH50.
Logging in to CH50 through the LAN Interface2.2
Users can log in to CH50 through the IE browser (such as IE8 or IE9). The login
process is as follows:
1. Input the IP address for the LAN interface of CH50 in the address bar of the
Web browser, and then press Enter.
2. At the login page, input the username and password, and then click OK.
The original username and password are both admin.

Reach!CH50!
User!Manual!
Copyright© SZ REACH TECH CO., LTD.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 5
The page is displayed as follows after the login process.
Configuring Templates2.3
After the templates configuration is completed, users select a template and CH50
performs the recording task according to parameters set for the template.
1. Click Templates to display the templates configuration page.
2. Click Add at the right side to open the Template Information dialog box.

Reach!CH50!
User!Manual!
Copyright© SZ REACH TECH CO., LTD.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 6
3. Set parameters at the General page.
Parameters are described as follows.
Parameter
Description
Device IP
Select a video conference recorder. The IP 127.0.0.1
indicates the current server.
Name
Indicates the name of a template.
Group
Select a user group where the template belongs. If
CH50 uses this template to record files, all files belong
to the user group.
Type
H323: the device is connected to the remote H.323
device.
H323_P: the device is connected to the remote H.323
device and users can set parameters for the pipeline.
H323_MC: the device is connected to the remote
H323_MC device and the media center.
RTSP: the device is worked in coordination with RTSP
encoding box or RTSP IP camera to perform the
Inhaltsverzeichnis

















