REED TV200 Bedienungsanleitung
Instruction
Manual
Model
Vibration Pen
TV200
reedinstruments
www com
Pantone 485 & 123
485 = (0/100/100/10)
123 = (0/18/100/0)
reedinstruments
www com
2
Pantone 485 & 123
485 = (0/100/100/10)
123 = (0/18/100/0)
Content
1.STRUCTURE......................................................3
2.OPERATION ......................................................3
3.FEATURES........................................................4
4.WARNINGS.......................................................5
5.REPAIR ..........................................................5
6.NON-WARRANTYPARTS............................................5
7.NOTES...........................................................6
8.APPENDIX........................................................6
ISO2372 MACHINE VIBRATION GRADES
reedinstruments
www com
3
Pantone 485 & 123
485 = (0/100/100/10)
123 = (0/18/100/0)
1. Structure
2. Operation
• Push the sensor on the plane being tested while keeping TV200 perpendicular to it. Start the test
by pressing the key.
• After releasing the key, the LCD will show “HOLD”. The result of the release time will be held for
about 40 seconds, and then the TV200 will turn off automatically.
• The upper limit of the TV200 is 199.9mm/s (rms). The LCD will show if vibration exceeds the
upper limit.
• When the LCD shows “BATT”, that means you should change batteries, or an error result may be
given out. Additionally, both batteries must be changed simultaneously.
1 .
1. Structure
reedinstruments
www com
4
Pantone 485 & 123
485 = (0/100/100/10)
123 = (0/18/100/0)
3. Features
Tested parameter RMS of vibration velocity (mm/s)
Range 0.1mm/s ~199.9mm/s
Transmission band 10Hz~1kHz
Accuracy ±5% ±2
Relative error 20Hz≤f≤1000Hz, ±10%
of transmission 10Hz≤f<20Hz,
Display 3 1/2 digits LCD refresh interval about 0.5 second
Power supply two button batteries (LR44 or SR44)
Battery capacity 10 hours continuously or 400 times testing
Operation environment Temperature: 0ºC~40ºC;
Relative humidity <85%
Dimensions 150mm × 22mm × 18mm (W×D×H)
Weight 55g (includes the two batteries)
+10%
-20%
reedinstruments
www com
5
Pantone 485 & 123
485 = (0/100/100/10)
123 = (0/18/100/0)
4. Warning
• While changing batteries, with the anode towards “ ”
• TV200 has no memory function. To keep the record, please write it down.
• Test points should be chosen at the bearing, bearing support or other structure components that
show the vibration characteristics explicitly.
• If it is possible, the best choice to know the vibration characteristic is measuring in three
perpendicular directions.
• To keep the sensor in contact with the plane being tested close, pressure should between 5N and
20N. Also, the pen should be perpendicular to the plane.
5. Repair
If any trouble occurs, user should not try to dismantle and repair it. REED Instruments can repair
this product include the warranty card and the specimen provided and a statement explaining the
problem (Excluding the non-warranty parts (see below).
Please keep in touch with the marketing department of our company or our sales agents.
6. Non-warranty parts
• Sheath
• Transducer
• Battery
• Accessories
reedinstruments
www com
6
Pantone 485 & 123
485 = (0/100/100/10)
123 = (0/18/100/0)
7. Notes:
• Class Iis a small motor (less than 15Kw), class II is a medium motor (15Kw~75Kw), class III is a
big motor (hard base), class IV is a big motor (soft base).
• The result should be taken from three perpendicular directions of the bearing shell.
8. Appendix
ISO2372 Machine vibration grades (See table on next page)
reedinstruments
www com
7
Pantone 485 & 123
485 = (0/100/100/10)
123 = (0/18/100/0)
0.28
0.45
0.71
1.12
1.8
2.8
4.5
7.1
11.2
18
28
45
Velocity (RMS) mm/s Class I Class II Class II Class IV
excellent
good
bad
forbidden
excellent
good
bad
forbidden
excellent
good
bad
forbidden
excellent
good
bad
forbidden
reedinstruments
www com
8
Pantone 485 & 123
485 = (0/100/100/10)
123 = (0/18/100/0)
Notes ___________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
Inhaltsverzeichnis
Andere REED Messgerät Handbücher
REED
REED CM-9930 Bedienungsanleitung
REED
REED CP-09 Bedienungsanleitung
REED
REED TM-8811 Bedienungsanleitung
REED
REED 8906 Bedienungsanleitung
REED
REED R9900 Bedienungsanleitung
REED
REED R7400 Bedienungsanleitung
REED
REED ST-123 Bedienungsanleitung
REED
REED MS2301 Bedienungsanleitung
REED
REED r8001 Bedienungsanleitung
REED
REED R7900 Bedienungsanleitung
REED
REED SD-4214 Leitfaden
REED
REED LM-8000 Bedienungsanleitung
REED
REED R6010 Bedienungsanleitung
REED
REED VC01 Bedienungsanleitung
REED
REED R9400 Bedienungsanleitung
REED
REED R9400 Bedienungsanleitung
REED
REED R8050 Bedienungsanleitung
REED
REED ST-8850 Bedienungsanleitung
REED
REED R5007 Bedienungsanleitung
REED
REED R3002 Bedienungsanleitung
