REED YK-80HT Bedienungsanleitung
Humidity Meter (Reed YK-80HT)
Humidity Meter measures the temperature and humidity of a given area.
Procedure
1) Connect the probe to the humidity meter
2) Turn on the humidity meter (POWER)
3) Upper display is humidity in units of “%RH” and lower display is temperature in “°C”
4) Press °C/°F to change between Celsius and Fahrenheit
5) Press the “REC MAX/MIN” button to begin recording measurements
6) Press “REC MAX/MIN” once to retrieve maximum value measured (display shows MAX)
7) Press “REC MAX/MIN” again to retrieve minimum value measured (display shows MIN)
8) Press and hold “HOLD” to reset the recorded values and begin testing again
Measurements
-Temperature – °C/°F
-Humidity - %RH (Relative Humidity)
Sampling Methods
• Account for the time of day (morning, afternoon, evening etc.)
• Account for the surrounding area (5m away from area, 10m away from area, etc.) to determine
if there are significant changes in the reading
• Consider the time of reading if taken during shift work, sometimes shift work is slow at the
beginning and slows down as shift comes to an end
• Determine if outside weather affects the reading (open or close area)
Inhaltsverzeichnis
Andere REED Messgerät Handbücher
REED
REED R5015 Bedienungsanleitung
REED
REED MS2301 Bedienungsanleitung
REED
REED R8150 Bedienungsanleitung
REED
REED R5060 Bedienungsanleitung
REED
REED SD-4214 Leitfaden
REED
REED R5000 Bedienungsanleitung
REED
REED LM-8000 Bedienungsanleitung
REED
REED R9500 Bedienungsanleitung
REED
REED VC01 Bedienungsanleitung
REED
REED EMF-822A Bedienungsanleitung
REED
REED ST-129 Bedienungsanleitung
REED
REED R3530 Bedienungsanleitung
REED
REED R5050 Bedienungsanleitung
REED
REED R5040 Bedienungsanleitung
REED
REED TM-8811 Bedienungsanleitung
REED
REED 8706 Bedienungsanleitung
REED
REED R7400 Bedienungsanleitung
REED
REED R3001 Bedienungsanleitung
REED
REED ST-805 Bedienungsanleitung
REED
REED ST-9800T Bedienungsanleitung
