Reflecta 64220 Bedienungsanleitung

USER'S MANUAL

User’s Manual

Contents

1: Safety precautions

2: Package contents ……………………………………………2

3: Description of parts ……………………………………………3

4: Loading Slides …………………………………………………4

5: Loading Negatives ……………………………………………5

6: Loading photo …………………………………………………6

7: General operations ……………………………………………9

8: Trouble shooting ………………………………………………26

9: Technical Speciﬁcations ………………………………………27

* Illustrations are for instructional purposes only, and may be

different from the actual product.

For correct usage please read these instructions carefully and

keeps in a safe place for future reference!

……………………………………………1

1: Safety precautions

Important: Do not expose this product to rain or moisture to

preserve the life of your product.

Caution: Do not disassemble this unit. To prevent the risk of

electric shock, do not remove cover.

Ventilation: The device should be situated so that its location

or position does not interfere with its proper

ventilation. For example, the unit should not be

situated on a bed, sofa, rug or similar surface that

may block the ventilation openings.

Heat: The device should be situated away from sources

of high heat such as radiators or stoves.

Cleaning: We strongly suggest using a clean, dry, non-alcohol

cotton swab to clean the glass surface periodically

to produce a clear image.

Non use period: The USB cord for the device should be unplugged

from the computer when the unit is left unused for a

long period of time.

USB overloading: Do not overload the USB connections on your

computer. If you have too many devices connected

to your computer such as a wireless mouse,

media player, mobile phone or other USB powered

devices. There may not be enough power for the

ﬁlm & photo scanner to operate properly.

Servicing: The user should not attempt to service the device

beyond those means described in the operating

instructions. All other servicing should be referred

to qualiﬁed person.

Film Holder: The design of the ﬁlm holder follows ISO standard.

In some cases the holes on the ﬁlm will not match

exactly to the alignment of the holder. This is

caused by a non-standard camera. In this case

there will be a small black line on the edge of the

frame that can easily be cropped out using photo

editing software.

ISO-- International Organization for Standardization

For environmental protection and energy conservation, besides

in PLAYBACK and USB mode, the device will be powered off

automatically without any operation in 30 minutes of inactivity.

Film & photo scanner•

USB cable•

Negative Film Holder•

Positive Slide Holder•

4 in 1 Photo Tray•

OCR CD•

AC/DC adapter•

User’s Manual•

Please remove the adaptor from the mains when not in use.

2: Package contents

3: Description of parts

Film and Photo Scanner

Positive Slide Holder

Negative Film Holder

Photo/Name card Holder USB cable

4: Loading Slides

Hold up the slide toward the light. Face the

trademark side of the slide away from you.

Look through the slide and it should appear

normally (not a mirror image).

Now turn the slide so the image is upside

down while looking at the same side.

Open the slide holder at the marked spot on

the top.

With the slide holder laid open place the slide

into recessed area in the holder- the slide

should ﬁt perfectly.

Note: Handle slides with care. Any dust

scratches or ﬁngerprints will show up on your

saved images. You’d better to cotton gloves

when handling slides. It is recommended to

use compressed air to remove any dust on

the slides. You can purchase it from an ofﬁce

supply or electronics retailer.

Close the slide holder and press the edges

so that it locks in place.

Hold it in the position as shown in the ﬁlm &

photo scanner.

Insert the Slide Holder into the slot on the

right side of the ﬁ lm & photo scanner as

shown.

Hold up the negative toward the light. As you

look through the negative you should be able to

read the small negative numbers normally (not a

mirror image).

Now turn the negative so the image is upside

down while looking at the same side.

Open the negative holder at the marked spot on

the top.

With the negative holder laid open place the

negative into holder so the notches line up with

the notches on the holder.

Note: Handle negatives with care. Any dust,

scratches or ﬁngerprints will show up on your

saved images. If possible use cotton gloves

when handling negatives. It is recommended

to use compressed air to remove any dust on

the negatives. This is not included with the ﬁlm

& photo scanner but can be purchased from an

ofﬁce supply or electronics retailer.

Close the negative holder and press the edges

so that it locks in place.

Hold it in the position as shown in the ﬁlm &

photo scanner.

Insert the negative holder into the slot on the

right side of the ﬁlm & photo scanner as shown.

Film Holder: The design of the ﬁlm holder

follows ISO standard. In some cases the holes

on the ﬁlm will not match exactly to the alignment

of the holder. This is caused by a non-standard

camera. In this case there will be a small black

line on the edge of the frame that can easily be

cropped out using photo editing software.

I S O - - I n t e r n a t i o n a l O r g a n i z a t i o n f o r

Standardization

5: Loading Negatives

6: Loading photo

Photo tray

Left bracket Right bracket

Position the brackets according to the marked dimensions on the photo

tray.

Note that for 5x7” photographs, the brackets do not need to be ﬁtted

into the photo tray.

Insert the photo into appropriately sized photo tray (5”x7” (5R), 4”x6”

(4R), 3 ½”x5” (3R), name card)

1. Place brackets in photo tray

2. Slide brackets downwards

to secure

Place the brackets into the slots and slide the brackets downwards to

secure. Check that they are securely fastened by turning the photo tray

upside down. The brackets should not fall off.

Inhaltsverzeichnis

Sprachen:

Andere Reflecta Scanner Handbücher

Reflecta

Reflecta x7-scan Bedienungsanleitung

Reflecta

Reflecta X120 Bedienungsanleitung

Reflecta

Reflecta Super 8 Bedienungsanleitung

Reflecta

Reflecta Combo Album SCAN 64400 Bedienungsanleitung

Reflecta

Reflecta x10-Scan Bedienungsanleitung

Reflecta

Reflecta X1-Scan Bedienungsanleitung

Reflecta

Reflecta DigitDia 6000 Bedienungsanleitung

Reflecta

Reflecta x7-scan Bedienungsanleitung

Reflecta

Reflecta x11-Scan Bedienungsanleitung

Reflecta

Reflecta x11-Scan Bedienungsanleitung

Reflecta

Reflecta X33-Scan Bedienungsanleitung

Reflecta

Reflecta xScan Film Scanner Bedienungsanleitung

Reflecta

Reflecta PF 135 Bedienungsanleitung

Reflecta

Reflecta X120 Bedienungsanleitung

Reflecta

Reflecta IMAGEBOX Bedienungsanleitung

Reflecta

Reflecta x10-Scan Bedienungsanleitung

Reflecta

Reflecta x22-Scan Bedienungsanleitung

Reflecta

Reflecta Docking Scanner Bedienungsanleitung

Reflecta

Reflecta Combo Album Scanner Bedienungsanleitung

Reflecta

Reflecta CyberView X5 MF Bedienungsanleitung

Reflecta

Reflecta X6 TouchScan Bedienungsanleitung

Reflecta

Reflecta ProScan 10T Bedienungsanleitung

Reflecta

Reflecta Super8-Normal8 Bedienungsanleitung

Reflecta

Reflecta Super 8 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung