Steps for Usage
1.
Connect the power supply and turn on the machine.
2.
Turn on the computer and install the software that comes with the
machine.
3.
Connect the machine and computer through the USB port.
4.
Place the item to be marked on the workbench and adjust the focus
using the one-click accurate focus function.
5.
Open the software and import the design to be marked.
6.
Adjust the marking parameters, including marking speed, marking
depth, and line width, according to the material and design to be
marked.
7.
Start the marking process by clicking the "marking" button in the
software.
8.
After the marking is completed, turn off the machine and computer
and disconnect the USB port.
