Regent Lighting Solutions Halo Bedienungsanleitung

www.regentlight.co.za

INSTALLATION INSTRUCTIONS

ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN

PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.

Regent Lighting reserves the right to change specifications modify designs and discontinue items without

incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other

information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be

liable for any error therein.

WARNING: TO AVOID FIRE, SHOCK OR DEATH

ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS

60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY

TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING

Electrical products can cause death, injury, or damage to

property. Installation of this product must be carried out

by a qualified electrician, in compliance with SANS 10142

or corresponding regulations of the country of installation.

On completion of installation, the Certificate of

Compliance must be updated.

Halo

WARNING

Electronic/Magnetic Control Device

ELECTRIC SHOCK

HAZARD

This equipment is to be

serviced by trained

personnel only.

WARNING

Electronic/Magnetic Control Device

ELECTRIC SHOCK

HAZARD

This equipment is to be

serviced by trained

personnel only.

3 - 13 MAIN REEF SERVICE ROAD, CORNER

SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,

JOHANNESBURG. SOUTH AFRICA.

TEL : +27 11 474 0171

www.regentlight.co.za

RE GENT L I GHT ING A D IVIS ION

OF WA HL IND USTR IES.

Save These Instructions for Future Reference

Access door to face in

the same direction as the

two bolts.(If applicable)

2 Ensure the your cage is

installed correctly. you

s h o u l d h a v e y o u r

threa d e d r o d 2 6 m m

above the ground

The two bolts face away

from the road at a 90

degree angle and that

the pole has the correct

diameter of ø76mm.

Halo

ŸBe sure the electricity

to the system you are

working on is

isolated.

Requirements:

ŸIf the main supply

power (live) is on, it

will cause damage

to the luminaire.

1. Fiting as supplied in

Regent Lighting

Solutions box.

DO NOT CONNECT THE FITTING LIVE

April 2020

Complete Halo

tting.

Replaceable

electrical

components

For non user replaceable light source: The light source contained in this luminaire

shall only be replacedby the manufacturer or his/her service

agent or a similar qualied person

www.regentlight.co.za

Stepped Modern Pole

Bolts

Access

door

Plan view 26 50

Ground level

www.regentlight.co.za

This product should be installed by a competent person i.e. Qualified electrician.

This product requires a constant stable electrical supply 220V - 240V VAC 50Hz - alternating current.

The product must be regularly maintained, including the replacement of lamps/LED timeously.

This product could be HAZARDOUS if not used correctly, it could cause electric shock, serious bodily harm or death.

This product is not a toy, please keep away from children.

This product may contain small parts that can be swallowed.

Use only the correct light bulbs/LED as stipulated on the carton for the product.

Any modifications of this product after supply will result in the guarantee being void.

Spare parts may become unavailable over time.Items can vary slightly from the picture on the carton

Coastal humidity can affect the longevity of the light fitting over time.

Be sure to follow the steps in the order given.

Read instructions carefully.

Important Safety Instructions

The above testing allows access to the Driver and LED compartments, however

these test should only be carried out by trained professional, incorrect handling of

the delicate components could cause further damage to the luminaire. If the

luminaire is opened for testing, all components must be re-assembled as before,

as incorrect re-assembly will impact the IP rating of the luminaire.

4A. Connect the tting

power lead to the pole

power lead using the

m a l e f e m a l e

connector.

4B. Test the tting to

m a k e s u r e a l l

c o n n e c t i o n s a r e

working.

Replaceable

electrical

components

-Lift the tting of the pole, be

sure to secure the tting as it

may fall to the ground and get

damaged.

-To begin fault nding, loosen

the 3 grub screws on the body

bottom.

-Carefully lift the gear tray out

of the pole, Be careful not to

damage of pull out any cables

when removing the gear tray.

-To check the LED, remove the

four screws on the body top of

the tting and lift up the body

top. Be careful not to pull or

damage any cables.

In the event of a failure.

-First check circuit breaker

before opening tting

3A. Insure the pole is

orientation is correct, the

pole bend is facing way

from the road.

3B. Prepare the cable

f r o m t h e p o l e t o b e

connect to the laminar.

Grub screw

Align and fasten the fitting to

pole via the 3 stainless steel grub

screws on the sides of the fitting

mount, using an allen key.

5 I n s u r e t h a t t h e f i t t i n g s

orientation is correct, facing

towards to the road at a 90

degree angle as shown in the

Image 3.

Inner and

outer gasket

Body top

Body bottom

Road

Ø76mm pole

Pole

Click*

Gear tray

Andere Regent Lighting Solutions Außenleuchte Handbücher

Regent Lighting Solutions

Regent Lighting Solutions Plato Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions T -Line Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Challenger Mini Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Lumina Mini Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Kazo Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions IRIS Series Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Bedford Bollard - Plinth Mounted Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Bedford Bollard - Buried Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Penza Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Bilux Inground Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Columbia Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Echo Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Europa Pro Post Top Bedienungsanleitung

Regent Lighting Solutions

Regent Lighting Solutions Europa Pro Bedienungsanleitung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung