Reliable DD56-6 Handbuch

www.reliablesprinkler.com

Features

• Coverage for DD80 spans up to 70 ft (21 m) with one row

of sprinklers

• Coverage for DD80 spans up to 100 ft (30.5 m) with three

rows of sprinklers

• All models use a 212°F (100°C) temperature rated fusible-

link operating element

• 150 square foot per sprinkler protection using GP56 and

AH Series sprinklers

Product Description

Reliable Attic Sprinklers are cULus Listed Specific Application

sprinklers. The sprinklers are available for protection of

combustible and non-combustible light hazard concealed

spaces with roof/ceiling slopes of 4:12 to 8:12. Reliable

Attic Sprinklers are upright sprinklers listed for use on

wet-pipe or dry-pipe sprinkler systems. All Reliable Attic

sprinklers use a 212°F (100°C) temperature rated fusible-

link operating element that is Listed for installation where the

maximum ceiling temperature is up to 150°F (66°C). Table A

provides a summary of available Reliable Attic sprinklers.

Application

Reliable Attic Sprinklers are listed for installation in

accordance with this bulletin and NFPA 13, “Standard for the

Installation of Fire Sprinklers.” The sprinklers are classified

as Special Sprinklers by NFPA 13, and are intended for

installation within combustible or noncombustible roof

structures, including those with wooden trusses. Coverage

area, spacing requirements, and design flow and pressure

for each sprinkler are provided in tables B-I on the individual

sprinkler data sheets in this bulletin. Example sprinkler

layouts and hydraulic design criteria are provided in Figures

9 through 25. Please note that the example sprinkler layouts

are intended as design aids only, and do not necessarily

Model DS56

Model GP56 Model AH56

(Model AH42 similar)

Model DD56

(Model DD80 similar)

Attic Sprinkler Summary Table A

Sprinkler

Model

K-Factor

gpm/psi1/2

(L/min/bar1/2)

Thread Size

NPT or

ISO7-1

Max. Coverage Area

(Measured on Floor)

ft x ft (m x m)

Roof Slope Design Criteria

Sprinkler

Identification

Number (SIN)

DD56-6 5.6 (80) ½ 6 x 40 (1.8 x 12) 4:12 to <6:12 Table B RA5624

DD56-27 5.6 (80) ½ 6 x 40 (1.8 x 12) 6:12 to 8:12 Table C RA5694

DD80-6 8.0 (115) ¾ 6 x 66 or 5 x 70

(1.8 x 20 or 1.5 x 21) 4:12 to <6:12 Table D RA5622

DD80-27 8.0 (115) ¾ 6 x 66 or 5 x 70

(1.8 x 20 or 1.5 x 21) 6:12 to 8:12 Table E RA5692

DS56 5.6 (80) ½ 6 x 40 (1.8 x 12) 4:12 to 8:12 Table F RA5625

GP56 5.6 (80) ½ 10 x 15 (3.0 x 4.6) 4:12 to 8:12 Table G RA5695

AH42 4.2 (60) ½ 10 x 15 (3.0 x 4.6) 4:12 to 8:12 Table H RA5623

AH56 5.6 (80) ½ 10 x 15 (3.0 x 4.6) 4:12 to 8:12 Table I RA5626

reflect all possible construction methods. In some cases,

a combination of layouts may be required. The Authority

Having Jurisdiction should be consulted for situations

that are not specifically addressed within this bulletin.

Special Note Regarding Insulation

Noncombustible insulation, properly secured with wire

netting to prevent sagging onto sprinklers may be used at

the roof deck. Attic sprinklers have not been evaluated and

are not listed for use with spray foam insulation. Use of attic

sprinklers with spray foam insulation should be evaluated on

a case by case basis with the Authority Having Jurisdiction.

cULus Listed

Models DD56-6, DD56-27, DD80-6, DD80-27,

DS56, GP56, AH42, & AH56 Sprinklers

Specific Application Sprinklers for Attic Spaces

Bulletin 056 February 2020

Model DD56-6 Minimum Required Flow and Residual Pressure Table B

Ceiling Slope Max. Coverage Area

ft x ft (m x m)

Flow

gpm (l/min)

Pressure

psi (bar)

4:12 to less than 6:12 6 x 40* (1.8 x 12) 25 (95) 19.9 (1.37)

* Long dimension of coverage area to be along the roof slope parallel to trusses. Length of coverage area is

split equally to each side of the sprinkler at the ridge. Coverage area is measured parallel to the floor.

Model DD56-6 Specific Application Sprinkler SIN RA5624

Technical Specifications

Style: Upright

Orientation: Deflector horizontal

Threads: 1/2” NPT or ISO 7-1R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure: 175 psi (12 bar)

Sprinkler Temperature Rating: 212°F (100°C)

Sensitivity: Quick-response

Hydraulic Design Criteria

(See Table B and Figures 9 - 29)

Finish

Brass

Sprinkler Wrench

Model W2

Listings and Approvals

cULus Listed

Hazard Classification

Light Hazard

System Types

Wet-pipe with steel or Listed CPVC pipe

Dry-pipe with steel pipe

Installation Criteria

Sprinkler Spacing

Minimum 4 ft (1.2 m), maximum 6 ft (1.8m)

between sprinklers along ridge

Minimum 26 ft (7.9 m) down the roof slope

toward eave to nearest sprinkler,

measured parallel to the roof deck

Horizontal Distance from Face of Truss

Min: 6 inches (150 mm)

Vertical Distance of Deflector Above Scissor

Truss

Min: 18 inches (450 mm)

Horizontal Distance from Center-line of Ridge

Max: 6 inches (150 mm)

Vertical Distance of Top of Deflector Below

Peak, Ridge, or Deck

Min: 17 inches (430 mm)

Max: 21 inches (530 mm)

Material Specifications

Thermal Sensor: Nickel Alloy Solder Link

Levers: Stainless Steel

Sprinkler Frame: Brass Alloy

Button: Copper Alloy

Button Clip: Stainless Steel

Sealing Assembly: Nickel Alloy with PTFE

Load Screw: Bronze Alloy

Deflector: Bronze Alloy

Model DD56-6 Sprinkler Components and Dimensions Figure 1

Bulletin 056

February 2020

Page 2 of 27

www.reliablesprinkler.com

Model DD56-27 Specific Application Sprinkler SIN RA5694

Technical Specifications

Style: Upright

Orientation: Deflector horizontal

Threads: 1/2” NPT or ISO 7-1R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure: 175 psi (12 bar)

Sprinkler Temperature Rating: 212°F (100°C)

Sensitivity: Quick-response

Hydraulic Design Criteria

(See Table C and Figures 9 - 29)

Finish

Brass

Sprinkler Wrench

Model W2

Listings and Approvals

cULus Listed

Hazard Classification

Light Hazard

System Types

Wet-pipe with steel or Listed CPVC pipe

Dry-pipe with steel pipe

Installation Criteria

Sprinkler Spacing

Minimum 4 ft (1.2 m), maximum 6 ft (1.8m)

between sprinklers along ridge

Minimum 26 ft (7.9 m) down the roof slope

toward eave to nearest sprinkler,

measured parallel to the roof deck

Horizontal Distance from Face of Truss

Min: 6 inches (150 mm)

Vertical Distance of Deflector Above Scissor

Truss

Min: 18 inches (450 mm)

Horizontal Distance from Center-line of Ridge

Max: 6 inches (150 mm)

Vertical Distance of Top of Deflector Below

Peak, Ridge, or Deck

Min: 17 inches (430 mm)

Max: 21 inches (530 mm)

Material Specifications

Thermal Sensor: Nickel Alloy Solder Link

Levers: Stainless Steel

Sprinkler Frame: Brass Alloy

Button: Copper Alloy

Button Clip: Stainless Steel

Sealing Assembly: Nickel Alloy with PTFE

Load Screw: Bronze Alloy

Deflector: Bronze Alloy

Model DD56-27 Minimum Required Flow and Residual Pressure Table C

Ceiling Slope Max. Coverage Area

ft x ft (m x m)

Flow

gpm (l/min)

Pressure

psi (bar)

6:12 to 8:12m 6 x 40* (1.8 x 12) 25 (95) 19.9 (1.37)

* Long dimension of coverage area to be along the roof slope parallel to trusses. Length of coverage area is

split equally to each side of the sprinkler at the ridge. Coverage area is measured parallel to the floor.

Model DD56-27 Sprinkler Components and Dimensions Figure 2

Bulletin 056

February 2020

Page 3 of 27

www.reliablesprinkler.com

Model DD80-6 Specific Application Sprinkler SIN RA5622

Technical Specifications

Style: Upright

Orientation: Deflector horizontal

Threads: 3/4” NPT or ISO 7-1R3/4

Nominal K-Factor: 8.0 (115 metric)

Max. Working Pressure: 175 psi (12 bar)

Sprinkler Temperature Rating: 212°F (100°C)

Sensitivity: Quick-response

Hydraulic Design Criteria

(See Table D and Figures 9 - 29)

Finish

Brass

Sprinkler Wrench

Model W2

Listings and Approvals

cULus Listed

Hazard Classification

Light Hazard

System Types

Wet-pipe with steel or Listed CPVC pipe

Dry-pipe with steel pipe

Installation Criteria

Sprinkler Spacing

Minimum 4 ft (1.2 m), maximum 6 ft (1.8m)

between sprinklers along ridge

Minimum 26 ft (7.9 m) down the roof slope

toward eave to nearest sprinkler,

measured parallel to the roof deck

Horizontal Distance from Face of Truss

Min: 6 inches (150 mm)

Vertical Distance of Deflector Above Scissor

Truss

Min: 18 inches (450 mm)

Horizontal Distance from Center-line of Ridge

Max: 6 inches (150 mm)

Vertical Distance of Top of Deflector Below

Peak, Ridge, or Deck

Min: 17 inches (430 mm)

Max: 21 inches (530 mm)

Material Specifications

Thermal Sensor: Nickel Alloy Solder Link

Levers: Stainless Steel

Sprinkler Frame: Brass Alloy

Button: Copper Alloy

Button Clip: Stainless Steel

Sealing Assembly: Nickel Alloy with PTFE

Load Screw: Bronze Alloy

Deflector: Bronze Alloy

Model DD80-6 Sprinkler Components and Dimensions Figure 3

Model DD80-6 Minimum Required Flow and Residual Pressure Table D

Ceiling Slope Max. Coverage Area

ft x ft (m x m)

Flow

gpm (l/min)

Pressure

psi (bar)

4:12 to less than 6:12

6 x 40* (1.8 x 12) 25 (95) 9.8 (0.68)

6 x 63* (1.8 x 19) 38 (144) 22.6 (1.56)

6 x 66* (1.8 x 20) 40 (151) 25 (1.72)

5 x 70* (1.5 x 21) 38 (144) 22.6 (1.56)

* Long dimension of coverage area to be along the roof slope parallel to trusses. Length of coverage area is

split equally to each side of the sprinkler at the ridge. Coverage area is measured parallel to the floor.

Bulletin 056

February 2020

Page 4 of 27

www.reliablesprinkler.com

Model DD80-27 Specific Application Sprinkler SIN RA5692

Technical Specifications

Style: Upright

Orientation: Deflector horizontal

Threads: 3/4” NPT or ISO 7-1R3/4

Nominal K-Factor: 8.0 (115 metric)

Max. Working Pressure: 175 psi (12 bar)

Sprinkler Temperature Rating: 212°F (100°C)

Sensitivity: Quick-response

Hydraulic Design Criteria

(See Table E and Figures 9 - 29)

Finish

Brass

Sprinkler Wrench

Model W2

Listings and Approvals

cULus Listed

Hazard Classification

Light Hazard

System Types

Wet-pipe with steel or Listed CPVC pipe

Dry-pipe with steel pipe

Installation Criteria

Sprinkler Spacing

Minimum 4 ft (1.2 m), maximum 6 ft (1.8m)

between sprinklers along ridge

Minimum 26 ft (7.9 m) down the roof slope

toward eave to nearest sprinkler,

measured parallel to the roof deck

Horizontal Distance from Face of Truss

Min: 6 inches (150 mm)

Vertical Distance of Deflector Above Scissor

Truss

Min: 18 inches (450 mm)

Horizontal Distance from Center-line of Ridge

Max: 6 inches (150 mm)

Vertical Distance of Top of Deflector Below

Peak, Ridge, or Deck

Min: 17 inches (430 mm)

Max: 21 inches (530 mm)

Material Specifications

Thermal Sensor: Nickel Alloy Solder Link

Levers: Stainless Steel

Sprinkler Frame: Brass Alloy

Button: Copper Alloy

Button Clip: Stainless Steel

Sealing Assembly: Nickel Alloy with PTFE

Load Screw: Bronze Alloy

Deflector: Bronze Alloy

Model DD80-27 Minimum Required Flow and Residual Pressure Table E

Ceiling Slope Max. Coverage Area

ft x ft (m x m)

Flow

gpm (l/min)

Pressure

psi (bar)

6:12 to 8:12

6 x 40* (1.8 x 12) 28 (106) 12.3 (0.85)

6 x 63* (1.8 x 19) 38 (144) 22.6 (1.56)

6 x 66* (1.8 x 20) 40 (151) 25 (1.72)

5 x 70* (1.5 x 21) 38 (144) 22.6 (1.56)

* Long dimension of coverage area to be along the roof slope parallel to trusses. Length of coverage area is

split equally to each side of the sprinkler at the ridge. Coverage area is measured parallel to the floor.

Model DD80-27 Sprinkler Components and Dimensions Figure 4

Bulletin 056

February 2020

Page 5 of 27

www.reliablesprinkler.com

Model DS56 Specific Application Sprinkler SIN RA5625

Technical Specifications

Style: Upright

Orientation: Frame arms

perpendicular to roof deck

Threads: 1/2” NPT or ISO 7-1R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure: 175 psi (12 bar)

Sprinkler Temperature Rating: 212°F (100°C)

Sensitivity: Quick-response

Hydraulic Design Criteria

(See Table F and Figures 9 - 29)

Finish

Brass

Sprinkler Wrench

Model DS56

Listings and Approvals

cULus Listed

Hazard Classification

Light Hazard

System Types

Wet-pipe with steel or Listed CPVC pipe

Dry-pipe with steel pipe

Installation Criteria

Sprinkler Spacing

Minimum 4 ft (1.2 m), maximum 6 ft (1.8m)

between sprinklers along ridge

Minimum 26 ft (7.9 m) down the roof slope

toward eave to nearest sprinkler,

measured parallel to the roof deck

Horizontal Distance from Face of Truss

Min: 6 inches (150 mm)

Horizontal Distance from Draft Curtain or Wall (1)

Min: 30 inches (762 mm)

Max: 42 inches (1067 mm)

Vertical Distance of Top of Deflector Above

Bottom of Draft Curtain

Min: 8 inches (200 mm)

Vertical Distance of Deflector Above Scissor

Truss

Min: 18 inches (450 mm)

Distance from Top of Deflector to Roof Deck

(measured perpendicular to roof deck)

Min: 9 inches (230 mm)

Max: 13 inches (330 mm)

Material Specifications

Thermal Sensor: Nickel Alloy Solder

Link

Levers: Brass Alloy

Frame Body: Brass Alloy

Frame Arms: Brass Alloy

Yoke: Copper Alloy

Sealing Assembly: Nickel Alloy with

PTFE

Load Screw: Bronze Alloy

Deflector: Bronze Alloy

Model DS56 Sprinkler Components and Dimensions Figure 5

Model DS56 Minimum Required Flow and Residual Pressure Table F

Ceiling Slope Max. Coverage Area

ft x ft (m x m)

Flow

gpm (l/min)

Pressure

psi (bar)

4:12 to 8:12 6 x 30* (1.8 x 9.1) 23 (87) 16.9 (1.17)

6 x 40* (1.8 x 12) 35 (132) 39.1 (2.70)

*Long dimension of coverage area to be along the roof slope parallel to trusses. Length of coverage area is in one direction from the

sprinkler toward eave. Coverage area is measured parallel to the floor.

(1) Model DS56 sprinklers may be installed back-to-back on opposite sides of a ridge where a draft curtain is installed to separate the

back-to-back rows of sprinklers.

Bulletin 056

February 2020

Page 6 of 27

www.reliablesprinkler.com

Model GP56 Specific Application Sprinkler SIN RA5695

Technical Specifications

Style: Upright

Orientation: Top of deflector parallel to roof deck

Threads: 1/2” NPT or ISO 7-1R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure: 175 psi (12 bar)

Sprinkler Temperature Rating: 212°F (100°C)

Sensitivity: Quick-response

Hydraulic Design Criteria

(See Table G and Figure 9 - 29)

Finish

Brass

Sprinkler Wrench

Model W2

Listings and Approvals

cULus Listed

Hazard Classification

Light Hazard

System Types

Wet-pipe with steel or Listed CPVC pipe

Dry-pipe with steel pipe

Installation Criteria

Sprinkler Spacing

Minimum 6 ft (1.8 m), maximum 10 ft (3.0 m)

between sprinklers across roof slope.

Minimum 6 ft (1.8 m) up roof slope to

nearest sprinkler, minimum 10 ft (3.0

m) down slope to nearest sprinkler,

measured parallel to roof deck.

Distance from Top of Deflector to Roof Deck

(measured perpendicular to roof deck)

Min: 9 inches (230 mm)

Max: 13 inches (330 mm)

Material Specifications

Thermal Sensor: Nickel Alloy Solder Link

Levers: Stainless Steel

Sprinkler Frame: Brass Alloy

Button: Copper Alloy

Button Clip: Stainless Steel

Sealing Assembly: Nickel Alloy with PTFE

Load Screw: Bronze Alloy

Deflector: Bronze Alloy

Model GP56 Minimum Required Flow and Residual Pressure Table G

Ceiling Slope

Max. Coverage Area

ft x ft

(m x m)

Flow

gpm

(l/min)

Pressure

psi

(bar)

4:12 to 8:12 10 x 15*

(3.0 x 4.6)

(64)

9.2

(0.63)

Model GP56 Sprinkler Components and Dimensions Figure 6

*Long dimension of coverage area to be along the roof slope parallel to trusses. Coverage is 3 ft. (0.9m) toward the peak and 12 ft.

(3.7m) toward the eave from the sprinkler. Coverage area to be measured parallel to the floor.

Bulletin 056

February 2020

Page 7 of 27

www.reliablesprinkler.com

Model AH42 Specific Application Sprinkler SIN RA5623

Technical Specifications

Style: Upright

Orientation: Top of deflector parallel to roof deck

Threads: 1/2” NPT or ISO 7-1R1/2

Nominal K-Factor: 4.2 (60 metric)

Max. Working Pressure: 175 psi (12 bar)

Sprinkler Temperature Rating: 212°F (100°C)

Sensitivity: Quick-response

Hydraulic Design Criteria

(See Table H)

Finish

Brass

Sprinkler Wrench

Model W2

Listings and Approvals

cULus Listed(1)

Hazard Classification

Light Hazard

System Types

Wet-pipe with steel or Listed CPVC pipe

Dry-pipe with steel pipe(2)

Installation Criteria

Sprinkler Spacing

Minimum 5 ft (1.5 m), maximum 10 ft (3.0 m)

between sprinklers across roof slope.

Minimum 12 ft (3.7 m) down slope to nearest

sprinkler, measured parallel to roof deck.

Note: A minimum 2 ft (0.61 m) lateral offset

is required between AH sprinklers when

viewed looking up the roof slope.

Distance from Top of Deflector to

Bottom of Truss Top Chord (measured

perpendicular to roof deck)

Min: 1 inches (25 mm)

Max: 3 inches (76 mm)

Frame Arm Orientation

Frame arms are to be oriented

parallel to the eave at the bottom

of the protected space.

Material Specifications

Thermal Sensor: Nickel Alloy Solder Link

Levers: Stainless Steel

Sprinkler Frame: Brass Alloy

Button: Copper Alloy

Button Clip: Stainless Steel

Sealing Assembly: Nickel Alloy with PTFE

Load Screw: Bronze Alloy

Deflector: CHROME PLATED Bronze Alloy

Model AH42 Sprinkler Components and Dimensions Figure 7

Model AH42 Minimum Required Flow and Residual Pressure Table H

Ceiling Slope Max. Coverage Area

ft x ft (m x m)

Flow

gpm (l/min)

Pressure

psi (bar)

4:12 to 8:12 10 x 15* (3.0 x 4.6) 15 (57) 12.8 (0.88)

*Long dimension of coverage area to be along the roof slope. Coverage is 6’-0”(1.8m) toward the peak and 9’-0”(2.7m) toward the

eave from the sprinkler. Coverage area to be measured parallel to the floor.

Note: The first row of AH sprinklers may be a maximum of 9’-0” from the eave; however, the first row must always be on the eave side

of the girder truss (see Figures 24 and 25).

Note:

(1) Listed for the protection of sloped combustible and noncombustible concealed spaces, including hip roofs with traditionally framed or

step down truss construction.

(2) NFPA13 requires the use of corrosion resistant or internally galvanized steel piping when using sprinklers with a K-Factor of 4.2.

Bulletin 056

February 2020

Page 8 of 27

www.reliablesprinkler.com

Model AH56 Specific Application Sprinkler SIN RA5626

Technical Specifications

Style: Upright

Orientation: Top of deflector parallel to roof deck

Threads: 1/2” NPT or ISO 7-1R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure: 175 psi (12 bar)

Sprinkler Temperature Rating: 212°F (100°C)

Sensitivity: Quick-response

Hydraulic Design Criteria

(See Table I)

Finish

Brass

Sprinkler Wrench

Model W2

Listings and Approvals

cULus Listed*

Hazard Classification

Light Hazard

System Types

Wet-pipe with steel or Listed CPVC pipe

Dry-pipe with steel pipe

Installation Criteria

Sprinkler Spacing

Minimum 6 ft (1.8 m), maximum 10 ft (3.0 m)

between sprinklers across roof slope.

Minimum 12 ft (3.7 m) down slope to nearest

sprinkler, measured parallel to roof deck.

Note: A minimum 2 ft (0.61 m) lateral offset

is required between AH sprinklers when

viewed looking up the roof slope.

Distance from Top of Deflector to

Bottom of Truss Top Chord (measured

perpendicular to roof deck)

Min: 1 inches (25 mm)

Max: 3 inches (76 mm)

Frame Arm Orientation

Frame arms are to be oriented

parallel to the eave at the bottom

of the protected space.

Material Specifications

Thermal Sensor: Nickel Alloy Solder Link

Levers: Stainless Steel

Sprinkler Frame: Brass Alloy

Button: Copper Alloy

Button Clip: Stainless Steel

Sealing Assembly: Nickel Alloy with PTFE

Load Screw: Bronze Alloy

Deflector: Bronze Alloy

Model AH56 Minimum Required Flow and Residual Pressure Table I

Ceiling Slope Max. Coverage Area

ft x ft (m x m)

Flow

gpm (l/min)

Pressure

psi (bar)

4:12 to 8:12 10 x 15* (3.0 x 4.6) 15 (57) 7.2 (0.50)

Model AH56 Sprinkler Components and Dimensions Figure 8

*Long dimension of coverage area to be along the roof slope. Coverage is 6’-0” (1.8m) toward the peak and 9’-0” (2.7m) toward the

eave from the sprinkler. Coverage area to be measured parallel to the floor.

Note: The first row of AH sprinklers may be a maximum of 9’-0” from the eave; however, the first row must always be on the eave side

of the girder truss (see Figures 24 and 25).

*Note: Listed for the protection of sloped combustible and noncombustible concealed spaces, including hip roofs with traditionally framed

or step down truss construction.

Bulletin 056

February 2020

Page 9 of 27

www.reliablesprinkler.com

Model DD Series Sprinkler – Example Layout (Not to Scale) Figure 9

Model DS56 Sprinkler – Example Layout (Not to Scale) Figure 10

Bulletin 056

February 2020

Page 10 of 27

www.reliablesprinkler.com

Andere Handbücher für DD56-6

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Reliable Bewässerungssystem Handbücher

Reliable

Reliable F156 Series Handbuch

Reliable

Reliable G5-56 Handbuch

Reliable

Reliable GFR Bedienungsanleitung

Reliable

Reliable G VELO Pendent Handbuch

Reliable

Reliable F1FR56 Handbuch

Reliable

Reliable GFR VELO–ECOH Handbuch

Reliable

Reliable F1FR40 Handbuch

Reliable

Reliable HL22 Bedienungsanleitung

Reliable

Reliable F1FR56 Handbuch

Reliable

Reliable G5 Series Bedienungsanleitung

Reliable

Reliable XL Handbuch

Reliable

Reliable Concealer G4A Bedienungsanleitung

Reliable

Reliable DH56 Dry Bedienungsanleitung

Reliable

Reliable GFR Series Bedienungsanleitung

Reliable

Reliable JL-14 Bedienungsanleitung

Reliable

Reliable F1 56 Bedienungsanleitung

Reliable

Reliable F4FR Bedienungsanleitung

Reliable

Reliable RFC Series Handbuch

Reliable

Reliable The Non-Ferrous Concealer F4FR-NF Bedienungsanleitung

Reliable

Reliable F1FR-FS56 Bedienungsanleitung

Reliable

Reliable F3-80 Dry Pendent Bedienungsanleitung

Reliable

Reliable DH56 HSW-PL Bedienungsanleitung

Reliable

Reliable F1-28 Series Bedienungsanleitung

Reliable

Reliable F1FR LO Series Handbuch

Beliebte Bewässerungssystem Handbücher anderer Marken

Hunter

Hunter Institutional Series Bedienungsanleitung

Cellfast

Cellfast 52-305 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL A Bedienungsanleitung

Oral Care Technologies

Oral Care Technologies Hydro Floss Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F892 Bedienungsanleitung

Netafim

Netafim NETBEAT Bedienungsanleitung

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Bedienungsanleitung

Tyco

Tyco CC3 Bedienungsanleitung

OpenSprinkler

OpenSprinkler OSPi Bedienungsanleitung

EINHELL

EINHELL GE-WW 5537 E Bedienungsanleitung

Valley

Valley Bender160 Bedienungsanleitung

Toro

Toro 730 Series Kurzanleitung

Eden

Eden 97063-EDAMZ Bedienungsanleitung

Tyco

Tyco TY-L Series Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL ELO-231 Bedienungsanleitung

Johnson Controls

Johnson Controls tyco ESFR-17 Bedienungsanleitung

Victaulic

Victaulic VicFlex I-VICFLEX.AQC-U Bedienungsanleitung