Reliable F3QR56 Bedienungsanleitung

Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523

Model F3QR56 Dry

K5.6 (80 metric)

Quick-Response,

Standard Spray Sprinklers

Bulletin 157 September 2021

Features

1. Available in the following congurations:

• Pendent with standard escutcheon

• Pendent with Model HB extended escutcheon

• Pendent with Model FP recessed escutcheon

• Pendent with Model F1 recessed escutcheon

• Concealed Pendent with Model CCP cover plate

• Horizontal Sidewall with Standard escutcheon

• Horizontal Sidewall with Model HB extended escutch-

eon

• Horizontal Sidewall with Model FP recessed escutch-

eon (FM Standard Response)

• Horizontal Sidewall with Model F1 recessed escutch-

eon (FM Standard Response)

• Upright

2. Available with 1” NPT, ISO7-1R1, 3/4” NPT, or ISO7-

1R3/4 inlet tting.

3. 3/4” NPT inlet ttings permit replacement of older 3/4”

inlet dry sprinklers without changing to a larger sprinkler

tting.

4. Sprinklers, escutcheons, and cover plates are available

in a wide variety of standard and special application n-

ishes.

5. White polyester, black polyester, and Electroless Nickel

PTFE (ENT) nish sprinklers are cULus Listed as Corro-

sion Resistant.

6. Available with cULus Listed 250 psi (17.2 bar) pressure

rating for Dry Pendent and select HSW congurations.

FM Approved for 175 psi (12 bar).

Product Description

Model F3QR56 Dry sprinklers are quick-response, standard

coverage sprinklers with a nominal K-Factor of 5.6 (80 metric).

Available in Dry Pendent, Dry Horizontal Sidewall, and Dry Up-

right congurations, Model F3QR56 Dry sprinklers all use a 3

mm glass bulb operating element. See the Temperature Rat-

ings table in this Bulletin for available temperature ratings. Mod-

el F3QR56 Dry sprinklers are intended for installation on wet-

pipe, dry-pipe, or preaction sprinkler systems in accordance

with NFPA 13, FM Property Loss Prevention Data Sheets, and

other applicable installation standards.

Model F3QR56 Dry Pendent and Sidewall sprinklers are avail-

able with a variety of escutcheon options as illustrated in Figs.

1 through 3 and Figs. 5 through 9. In addition, Model F3QR56

Dry Pendent sprinklers are also available with the Model CCP

conical concealed cover plate as illustrated in Fig. 4. Available

sprinkler, escutcheon, and cover plate nishes are identied in

the Finishes table in this Bulletin. The Model F1 escutcheon,

Model FP escutcheon, and Model CCP cover plate are the only

recessed escutcheons and cover plate listed for use with Model

F3QR56 Dry sprinklers; the use of any other recessed escutch-

eon or cover plate with Model F3QR56 Dry sprinklers will void

all guarantees, warranties, listings and approvals.

Concealed

(See Fig. 4)

Recessed FP Pendent

(See Fig. 3)

Recessed F1

Horizontal Sidewall

(See Fig. 9)

Horizontal Sidewall

(See Fig. 6)

Pendent

(See Fig. 1)

Recessed F1 Pendent

(See Fig. 5)

Recessed FP

Horizontal Sidewall

(See Fig. 8)

Pendent / HB

(See Fig. 2)

Horizontal Sidewall / HB

(See Fig. 7)

Upright

(See Fig. 10)

Inlet ttings are available with 1” NPT, ISO 7-1R1, 3/4” NPT, or

ISO7-1R3/4 threads. Sprinklers with 3/4” NPT and ISO7-1R3/4

inlet ttings are intended primarily for replacement of existing

3/4” or ISO7-1R3/4 inlet dry sprinklers, but may also be used in

new installations.

See the Available Congurations, Listings, and Approvals

table in this Bulletin for further information on Model F3QR56

Dry sprinklers.

Available Congurations, Listings, and Approvals

Sprinkler

Model

Escutcheon or

Cover Plate

Available

Length

(See Figs. 1-9)

Listings and

Approvals(1)

Inlet

Threads

Sprinkler

Identication

Number

(SIN)

F3QR56 Dry

Pendent

Standard

Escutcheon

2” to 36”

(50 to 900 mm)

cULus, NYC 3/4” NPT or

ISO7-1R3/4

R5714

HB Extended

Escutcheon

3-1/2” to 36”

(90 to 900 mm)

F1 Recessed

Escutcheon

FP Recessed

Escutcheon

CCP Cover Plate

Standard

Escutcheon

2” to 48”

(50 to 1200 mm)

cULus, FM, NYC

1” NPT

ISO7-1R1

HB Extended

Escutcheon

3-1/2” to 48”

(90 to 1200 mm)

F1 Recessed

Escutcheon

FP Recessed

Escutcheon

CCP Cover Plate

F3QR56 Dry

Horizontal Sidewall

Standard

Escutcheon

2” to 48”

(50 to 1200 mm)

cULus(2), NYC(2) 3/4” NPT

ISO7-1R3/4

R5734

HB Extended

Escutcheon

3-1/2” to 48”

(90 to 1200 mm)

F1 Recessed

Escutcheon

FP Recessed

Escutcheon

Standard

Escutcheon

2” to 48”

(50 to 1200 mm) cULus(2),

FM(3), NYC(2)

1” NPT

ISO7-1R1

HB Extended

Escutcheon

3-1/2” to 48”

(90 to 1200 mm)

F1 Recessed

Escutcheon 3-1/2” to 48”

(90 to 1200 mm)

cULus(2),

FM(3)(4), NYC(2)

FP Recessed

Escutcheon

F3QR56 Dry

Upright N/A 5” to 48”

(127 to 1200 mm) cULus(2) 1” NPT or

ISO7-1R1 R5724

(1) For available temperature ratings and nishes see the Temperature Ratings and Finishes tables, respectively, in this Bulletin.

(2) cULus Listing and NYC for Light Hazard and Ordinary Hazard only.

(3) FM Approved for Light Hazard only.

(4) Model F3QR56 Dry Horizontal Sidewall with Model F1 or Model FP recessed escutcheon are FM Approved as Standard Response.

Listing and Approval Agencies

See the Available Congurations, Listings, and Approvals table in this Bulletin for listings and approvals applicable to each

available conguration.

1. Listed by Underwriters Laboratories, Inc. and UL Certied for Canada (cULus)

2. Certied by FM Approvals (FM)

3. Permitted in New York City based on UL Listing per Local Law 33/2007 (NYC)

Technical Data

Nominal K-Factor: 5.6 gpm/psi1/2 (80 L/min/bar1/2)

Sprinkler Listing or Approval Deflector to Ceiling Distance Maximum Working Pressure

F3QR56 Dry

Pendent

cULus, NYC See note below 250 psi (17.2 bar)

FM See note below 175 psi (12 bar)

F3QR56 Dry

Horizontal Sidewall

cULus, NYC 4” to 6 “ 250 psi (17.2 bar)

4” to 12” 175 psi (12 bar)

FM See note below 175 psi (12 bar)

F3QR56 Dry Upright cULus See note below 175 psi (12 bar)

Note: Deflector distance to be in accordance with applicable NFPA, FM, or other agency requirements. Information is provided

only when additional clarication is necessary.

Temperature

Classication Glass Bulb Color Sprinkler

Temperature Rating

Cover Plate

Temperature Rating

Maximum Ceiling

Temperature

Listings and

Approvals(1)

Ordinary Orange 135°F (57°C) 135°F (57°C) 100°F (38°C) cULus, FM, NYC

Red 155°F (68°C)

Intermediate Yellow 175°F (79°C) 165°F (74°C) 150°F (66°C) cULus, NYC

Intermediate Green 200°F (93°C) 165°F (74°C) 150°F (66°C) cULus, FM, NYC

High Blue 286°F (141°C) None 225°F (107°C) cULus, FM(2), NYC

165°F (74°C) 150°F (66°C) cULus, NYC

(1) For listed and approved sprinkler, escutcheon, and inlet congurations see the Available Congurations, Listings, and Approvals table in this Bulletin.

(2) High temperature classication is FM Approved with Standard and Model HB escutcheons only.

Finish Notes

1. Finishes vary with type of trim selected. See table provided with each sprinkler detail for nish combinations.

2. Paint or any other coating applied over the factory nish will void all approvals and warranties.

3. Other nishes and colors may be available on special order. Consult your Reliable sales representative for details.

4. For Standard, Model HB, and Model F1 trims, both components of escutcheon are nished.

5. For Model FP and CCP trims, only the trim ring and cover plate are nished. The threaded sprinkler cup is unnished.

Note: The sprinkler can protrudes ¼” when escutcheon is in nominal position. Escutcheon adjustment provides -¼” (-6mm) to +1¼” (+32mm) “A” dimen-

sion adjustment range.

Fig. 1

Model F3QR56 Dry Pendent Sprinkler with Standard Escutcheon (SIN R5714)

“A” Dim. 2” to 48” (51mm to 1219mm) in 1/4” (6mm) increments for 1” connections or

2” to 36” (51mm to 914mm) in 1/4” (6mm) increments for 3/4” connections

Sprinkler Guard: Model C2

Finish Combinations: Standard Escutcheon

Sprinkler Escutcheon(2)(3)

Bronze Polished Stainless

Bronze Laquered Brass

Chrome Polished Stainless

White Polyester(1) White Polyester(4)

Black Polyester(1) Black Polyester(4)

Custom Color Polyester(1) Custom Color Polyester(4)

Electroless Nickel PTFE(1) Polished Stainless

Notes:

1. UL Listed as Corrosion Resistant.

2. Escutcheons do not carry corrosion resistant listings.

3. Base material is 316 stainless steel unless noted.

4. Base material may be brass.

Model F3QR56 Dry Pendent Sprinkler with Model HB Extended Escutcheon (SIN R5714)

“A” Dim. 3½” to 48” (89mm to 1219mm) in 1/4” (6mm) increments for 1” connections or 3½”

to 36” (89mm to 914mm) in 1/4” (6mm) increments for 3/4” connections

Note: The sprinkler can protrudes 1¼” when escutcheon is in nominal position. Escutcheon adjustment provides -½” (-12.7mm) to +½”

(+12.7mm) “A” dimension adjustment range.

Fig. 2

Sprinkler Guard: Model C2

Finish Combinations: HB Escutcheon

Sprinkler Escutcheon(2)(3)

Bronze Chrome

Chrome Chrome

White Polyester(1) White Polyester

Black Polyester(1) Black Polyester

Custom Color Polyester(1) Custom Color Polyester

Electroless Nickel PTFE(1) Stainless Steel

Electroless Nickel PTFE(1) Polished Stainless

Notes:

1. UL Listed as Corrosion Resistant.

2. Escutcheons do not carry corrosion resistant listings.

3. Base material is 316 stainless steel unless noted.

Note: Do not install the Model F3QR56 Dry Pendent sprinkler with the Model FP escutcheon in ceilings which have positive pressure in

the space above.

Fig. 3

Model F3QR56 Dry Pendent Sprinkler with Model FP Recessed Escutcheon (SIN R5714)

“A” Dim. 31/2” to 48” (89mm to 1219mm) in 1/4” (6mm) increments for 1” connections or

3½” to 36” (89mm to 914mm) in 1/4” (6mm) increments for 3/4” connections

Finish Combinations: FP Recessed Escutcheon

Sprinkler(1) Escutcheon(3)(4)

Bronze Chrome

Bronze Brass

Chrome Chrome

White Polyester(2) White Polyester

Black Polyester(2) Black Polyester

Custom Color Polyester(2) Custom Color Polyester

Electroless Nickel PTFE(2) Stainless Steel

Notes:

1. Cup for FP Recessed is unnished galvanized steel except

electroless nickel PTFE sprinkler uses a stainless steel cup.

2. UL Listed as Corrosion Resistant.

3. Escutcheons do not carry corrosion resistant listings.

4. Base material is cold rolled steel unless noted.

Model F3QR56 Dry Pendent Sprinkler with Model CCP Cover Plate (SIN R5714)

“A” Dim. 31/2” to 48” (89mm to 1219mm) in 1/4” (6mm) increments for 1” connections or

3½” to 36” (89mm to 914mm) in 1/4” (6mm) increments for 3/4” connections

Note: Do not install the Model F3QR56 Dry Pendent sprinkler with the Model CCP cover plate in ceilings which have positive pressure

in the space above.

Fig. 4

Finish Combinations: CCP Conical Cover Plate

Sprinkler Cover Plate(2)

Bronze

White Polyester

Chrome Bright

Chrome Dull

Bright Brass

Unnished Bronze

Black Plate

Custom Color

Notes:

1. Cup for CCP Concealed in unnished galvanized steel.

2. Cover plates do not carry corrosion resistant listings.

Model F3QR56 Dry Pendent Sprinkler with Model F1 Recessed Escutcheon (SIN R5714)

“A” Dim. 31/2” to 48” (89mm to 1219mm) in 1/4” (6mm) increments for 1” connections or

3½” to 36” (89mm to 914mm) in 1/4” (6mm) increments for 3/4” connections.

Fig. 5

Finish Combinations: F1 Recessed Escutcheon

Sprinkler Escutcheon(2)(3)

Bronze Chrome

Bronze Brass

Chrome Chrome

White Polyester(1) White Polyester

Black Polyester(1) Black Polyester

Custom Color Polyester(1) Custom Color Polyester

Electroless Nickel PTFE(1) Stainless Steel

Notes:

1. UL Listed as Corrosion Resistant.

2. Escutcheons do not carry corrosion resistant listings.

3. Base material is cold rolled steel unless noted.

Note: The sprinkler can protrudes ¼” when escutcheon is in nominal position. Escutcheon adjustment provides -¼” (-6mm) to +1¼”

(+32mm) “A” dimension adjustment range.

Fig. 6

Model F3QR56 Dry Horizontal Sidewall Sprinkler with Standard Escutcheon (SIN R5734)

“A” Dim. 2” to 48” (51mm to 1219mm) in 1/4” (6mm) increments for 1” connections or 2”

to 36” (51mm to 914mm) in 1/4” (6mm) increments for 3/4” connections

Finish Combinations: Standard Escutcheon

Sprinkler Escutcheon(2)(3)

Bronze Polished Stainless

Bronze Laquered Brass

Chrome Polished Stainless

White Polyester(1) White Polyester(4)

Black Polyester(1) Black Polyester(4)

Custom Color Polyester(1) Custom Color Polyester(4)

Electroless Nickel PTFE(1) Polished Stainless

Notes:

1. UL Listed as Corrosion Resistant.

2. Escutcheons do not carry corrosion resistant listings.

3. Base material is 316 stainless steel unless noted.

4. Base material may be brass.

10.

Model F3QR56 Dry Horizontal Sidewall Sprinkler with Model HB Escutcheon (SIN R5734)

“A” Dim. 31/2” to 48” (89mm to 1219mm) in 1/4” (6mm) increments for 1” connections or

3½” to 36” (89mm to 914mm) in 1/4” (6mm) increments for 3/4” connections

Note: The sprinkler can protrudes 1¼” when escutcheon is in nominal position. Escutcheon adjustment provides -½” (-12.7mm) to +½”

(+12.7mm) “A” dimension adjustment range.

Fig. 7

Finish Combinations: HB Escutcheon

Sprinkler Escutcheon(2)(3)

Bronze Chrome

Chrome Chrome

White Polyester(1) White Polyester

Black Polyester(1) Black Polyester

Custom Color Polyester(1) Custom Color Polyester

Electroless Nickel PTFE(1) Stainless Steel

Electroless Nickel PTFE(1) Polished Stainless

Notes:

1. UL Listed as Corrosion Resistant.

2. Escutcheons do not carry corrosion resistant listings.

3. Base material is 316 stainless steel unless noted.

Andere Handbücher für F3QR56

Inhaltsverzeichnis

Andere Reliable Bewässerungssystem Handbücher

Reliable

Reliable F3QR56 Dry Handbuch

Reliable

Reliable N252 EC Pendent Bedienungsanleitung

Reliable

Reliable G5-56 300 Bedienungsanleitung

Reliable

Reliable F1-SS Series Bedienungsanleitung

Reliable

Reliable G Bedienungsanleitung

Reliable

Reliable DH56 HSW-PL Bedienungsanleitung

Reliable

Reliable DH56 Dry Bedienungsanleitung

Reliable

Reliable GFR Bedienungsanleitung

Reliable

Reliable Pantman F1 Bedienungsanleitung

Reliable

Reliable F1FR-300 Bedienungsanleitung

Reliable

Reliable F1-SS Series Handbuch

Reliable

Reliable F1FR LO Series Handbuch

Reliable

Reliable F1FR – 300 Bedienungsanleitung

Reliable

Reliable JL-17 Benutzerhandbuch

Reliable

Reliable H PrePak Wartungshandbuch

Reliable

Reliable N25 Bedienungsanleitung

Reliable

Reliable DH56 HSW-PL Handbuch

Reliable

Reliable KFR56 Series Bedienungsanleitung

Reliable

Reliable F1-56-300 Series Bedienungsanleitung

Reliable

Reliable N252 Bedienungsanleitung

Reliable

Reliable RFC30 LL Bedienungsanleitung

Reliable

Reliable N252 EC Bedienungsanleitung

Reliable

Reliable F1FR56 Handbuch

Reliable

Reliable F1XLH Series Bedienungsanleitung

Beliebte Bewässerungssystem Handbücher anderer Marken

Hunter

Hunter Institutional Series Bedienungsanleitung

Cellfast

Cellfast 52-305 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL A Bedienungsanleitung

Oral Care Technologies

Oral Care Technologies Hydro Floss Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F892 Bedienungsanleitung

Netafim

Netafim NETBEAT Bedienungsanleitung

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Bedienungsanleitung

Tyco

Tyco CC3 Bedienungsanleitung

OpenSprinkler

OpenSprinkler OSPi Bedienungsanleitung

EINHELL

EINHELL GE-WW 5537 E Bedienungsanleitung

Valley

Valley Bender160 Bedienungsanleitung

Toro

Toro 730 Series Kurzanleitung

Eden

Eden 97063-EDAMZ Bedienungsanleitung

Tyco

Tyco TY-L Series Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL ELO-231 Bedienungsanleitung

Johnson Controls

Johnson Controls tyco ESFR-17 Bedienungsanleitung

Victaulic

Victaulic VicFlex I-VICFLEX.AQC-U Bedienungsanleitung