Reliable F1FR40 Handbuch

Model F1FR40 Pendent

Note: Not all versions of

the product are shown.

F1FR Series Sprinklers Summary

Sprinkler

Model

K-Factor gpm/psi1/2

(lpm/bar1/2)Orientation Listings & Approvals Max. Working Pressure

psi (bar)

Sprinkler

Identification

Number (SIN)

F1FR40 4.0 (57) Pendent VdS 175 psi (12 bar) RA1418

Table A

Model F1FR40 Pendent

Recessed, FP Escutcheon

Model F1FR40 Pendent

Recessed, F1 Escutcheon

(F2 escutcheon similar)

Features

• Standard coverage quick response sprinklers

• Pendent and recessed pendent application

• Low profile, compact design

• Available in a wide variety of finishes

Product Description

The Reliable Model F1FR40 is a quick-response, standard

spray pendent automatic fire sprinkler utilizing a sensitive 3.0 mm

glass bulb thermal element.

The Model F1FR40 pendent sprinkler may be installed

exposed or surface mounted using escutcheons such as the

Reliable Models B, C, or HB (reference Technical Bulletin 204).

When installed recessed the sprinkler is specifically listed

and may only be installed with listed escutcheons. Refer to

the technical information on the following pages for specific

listings for recessed sprinklers, and refer to Figure 2 for

dimensional information.

Table A provides a summary of the approvals and availability

for the Model F1FR40 sprinkler.

www.reliablesprinkler.com

K-factor 4.0 (57)

F1FR40 (VdS)

Standard Spray Sprinkler

Bulletin 183 October 2020

Model F1FR40 Pendent Sprinkler SIN RA1418

Technical Specifications

Style: Pendent or Recessed Pendent

Threads: 1/2” NPT or ISO 7-R1/2

Nominal K-Factor: 4.0 (57 metric)

Max. Working Pressure: 175 psi (12 bar)

Material Specifications

Thermal Sensor: 3 mm Glass Bulb

Sprinkler Frame: Brass Alloy

Cap: Bronze Alloy

Sealing Washer: Nickel with PTFE

Load Screw: Copper Alloy

Deflector: Brass Alloy

Sprinkler Finishes

(See Table B)

Sensitivity

Quick-response

Temperature Ratings

135°F (57°C)

155°F (68°C)

175°F (79°C)

200°F (93°C)

286°F (141°C)*

Recessed Escutcheons

Model F1

Model F2

Model FP

Sprinkler Wrenches

Model W2 (pendent)

Model W4 (recessed pendent)

Listings and Approvals

VdS

*Note: 286°F (141°C) temperature rated sprinkler not listed for recessed use.

Model F1FR40 Pendent Sprinkler Components and Dimensions Figure 1

Bulletin 183

October 2020

Page 2 of 4

www.reliablesprinkler.com

Recessed Installation: Pendent Sprinklers Figure 2

Wrenches

Model W2 (pendent)

Model W4 (recessed pendent)

Installation

Model F1FR Series sprinklers must be installed with the

W2 (pendent) or W4 (recessed pendent) Reliable sprinkler

installation wrench as identified in this Bulletin. Any other wrench

may damage the sprinkler. The Models W2 and W4 wrenches

have two sets of jaws. Use the smallest set of jaws that fit the

wrench flats of the sprinkler. A leak tight sprinkler joint can be

obtained with a torque of 8 to 18 lb-ft (11 to 24 N-m). Do not

tighten sprinklers over the maximum recommended installation

torque. Exceeding the maximum recommended installation

torque may cause leakage or impairment of the sprinkler.

Both the Model W2 and W4 wrench have two sets of jaws.

Use the smallest set of jaws that fit on the wrench flats of the

sprinkler. The Model W4 wrench is used in conjunction with

a nominal 1/2” square drive ratchet with a nominal 5” long

extension (not provided).

Glass bulb sprinklers have orange bulb protectors or protective

caps to minimize bulb damage during shipping, handling

and installation. Reliable sprinkler installation wrenches are

designed to install sprinklers with bulb protectors in place.

Remove the bulb protector at the time when the sprinkler

system is placed in service for fire protection. Removal of the

bulb protector before this time may leave the bulb vulnerable

to damage. Remove bulb protectors by undoing the clasp by

hand. Do not use tools to remove bulb protectors.

Bulletin 183

October 2020

Page 3 of 4

www.reliablesprinkler.com

Standard Finishes Special Application Finishes

Sprinkler F1, F2 and FP(3)

Escutcheons Sprinkler F1, F2 and FP(3)

Escutcheons

Bronze Brass Electroless Nickel PTFE Bright Brass

Chrome Plated Chrome Plated Bright Brass(4) Black Plated

White Polyester White Polyester Black Plated Black Paint

Black Paint Off White

Off White Chrome Dull

Chrome Dull

Notes:

1. Other finishes and colors are available on special order. Consult your Reliable sales representative for details.

2. Paint or any other coating applied over the factory finish will void all approvals and warranties.

3. The Model FP assembly consists of a sprinkler mounted in a galvanized steel cup with a finished trim ring.

4. For 200°F (93°C) maximum temperature rated sprinklers only.

Sprinkler and Escutcheon Finishes(1)(2) Table B

Maintenance

Reliable Model F1FR series sprinklers should be inspected

and the sprinkler system maintained in accordance with NFPA

25, as well as the requirements of any Authorities Having

Jurisdiction.

Prior to installation, sprinklers should remain in the original

cartons and packaging until used. This will minimize the

potential for damage to sprinklers that could cause improper

operation or non-operation.

Do not clean sprinklers with soap and water, ammonia

liquid or any other cleaning fluids. Remove dust by gentle

vacuuming without touching the sprinkler.

Replace any sprinkler which has been painted (other than

factory applied). A stock of spare sprinklers should be

maintained to allow quick replacement of damaged or

operated sprinklers. Failure to properly maintain sprinklers

may result in inadvertent operation or non-operation during a

fire event.

Guarantee

For the guarantee, terms, and conditions, visit www.

reliablesprinkler.com.

Ordering Information

F1FR40 Ordering Information

Specify the following when ordering:

• Deflector/Orientation

Pendent

Pendent - FP

• Temperature Rating

• Sprinkler Finish

See Table B

• Recessed Escutcheon*

• Escutcheon Finish

See Table B

• Sprinkler Wrench

Model W-2 (pendent)

Model W-4 (recessed pendent)

*Note: 286°F (141°C) sprinklers are not listed to be used

recessed.

P/N 9999970607

Bulletin 183

October 2020

Page 4 of 4

www.reliablesprinkler.com

Andere Reliable Bewässerungssystem Handbücher

Reliable

Reliable G5-80 Bedienungsanleitung

Reliable

Reliable F1FR-FS LO Bedienungsanleitung

Reliable

Reliable G Series Handbuch

Reliable

Reliable F1FR-FS56 Handbuch

Reliable

Reliable GFR Series Bedienungsanleitung

Reliable

Reliable H PrePak Wartungshandbuch

Reliable

Reliable G5-56 Dry Bedienungsanleitung

Reliable

Reliable G6-80 Handbuch

Reliable

Reliable KFR-CCS Bedienungsanleitung

Reliable

Reliable J168 Bedienungsanleitung

Reliable

Reliable F1 56 Bedienungsanleitung

Reliable

Reliable J112SS Series Handbuch

Reliable

Reliable G5 Series Bedienungsanleitung

Reliable

Reliable Pantman F1 Bedienungsanleitung

Reliable

Reliable GL 112 Bedienungsanleitung

Reliable

Reliable F1 Res 30 LL Bedienungsanleitung

Reliable

Reliable F156 Series Bedienungsanleitung

Reliable

Reliable Pantman F1 Bedienungsanleitung

Reliable

Reliable F4FR Bedienungsanleitung

Reliable

Reliable N252 EC Bedienungsanleitung

Reliable

Reliable F1FR28 Series Bedienungsanleitung

Reliable

Reliable DH56 HSW-PL Bedienungsanleitung

Reliable

Reliable JL-17 Benutzerhandbuch

Reliable

Reliable JL-14 Handbuch

Beliebte Bewässerungssystem Handbücher anderer Marken

Hunter

Hunter Institutional Series Bedienungsanleitung

Cellfast

Cellfast 52-305 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL A Bedienungsanleitung

Oral Care Technologies

Oral Care Technologies Hydro Floss Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F892 Bedienungsanleitung

Netafim

Netafim NETBEAT Bedienungsanleitung

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Bedienungsanleitung

Tyco

Tyco CC3 Bedienungsanleitung

OpenSprinkler

OpenSprinkler OSPi Bedienungsanleitung

EINHELL

EINHELL GE-WW 5537 E Bedienungsanleitung

Valley

Valley Bender160 Bedienungsanleitung

Toro

Toro 730 Series Kurzanleitung

Eden

Eden 97063-EDAMZ Bedienungsanleitung

Tyco

Tyco TY-L Series Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL ELO-231 Bedienungsanleitung

Johnson Controls

Johnson Controls tyco ESFR-17 Bedienungsanleitung

Victaulic

Victaulic VicFlex I-VICFLEX.AQC-U Bedienungsanleitung