Reliable J112SS Series Handbuch

www.reliablesprinkler.com

Product Description

Model J112SS series sprinklers are cULus Listed extend-

ed coverage spray sprinklers intended for installation in

accordance with NFPA 13. Model J112SS sprinklers have

a frame, deflector, and cap made of Type 316 Stainless

Steel. Coverage areas up to 400 ft2(37 m2) per sprinkler

with a maximum spacing of up to 20 ft by 20 ft (6.1 m by

6.1 m) are permitted for both Light Hazard and Ordinary

Hazard occupancies. Listed flows and pressures for each

hazard classification and sprinkler spacing are provided in

this Bulletin. The Model J112SS is cULus Listed as quick-re-

sponse sprinklers for Light Hazard occupancies. When used

in the Ordinary Hazard occupancies, Model J112SS series

sprinklers are cULus Listed as quick-response for spacings

up to 14 ft by 14 ft (4.3 m by 4.3 m) and standard-response

for other listed spacings up to 20 ft by 20 ft (6.1 m by 6.1 m).

Model J112SS Pendent and J112SS Upright sprinklers

use a glass bulb operating element and are cULus Listed

as Corrosion Resistant Sprinklers. Model J112SS Pendent

sprinklers are cULus Listed for use with the Model FP re-

cessed escutcheon, which provides up to ½ inch (13 mm) of

adjustment. In addition, for Ordinary Hazard occupancies,

the Model J112SS Pendent sprinklers are cULus Listed for

use with the Model F1 recessed escutcheon that provides

up to ¾ inch (19 mm) of adjustment. Both escutcheons are

manufactured from Type 316 stainless steel alloy.

Application

Model J112SS series sprinklers are intended for installation

in Light Hazard and Ordinary Hazard occupancies in ac-

cordance with NFPA 13. The sprinklers must be installed in

accordance with the requirements of NFPA 13 for extended

coverage spray sprinklers and the requirements identified

in this Bulletin. In addition to the installation requirements

of NFPA 13, cULus Listed Specific Application Criteria for

installation under concrete tee construction is provided in

this Bulletin.

cULus Listed

K11.2 (160 metric)

Model J112 Stainless Steel Series Sprinklers

Extended Coverage Sprinklers

for Light Hazard and Ordinary Hazard

Bulletin 178 December 2019

Model J112SS UprightModel J112SS Pendent

Model J112SS Sprinkler Summary

Model Orientation Sprinkler Identification Number (SIN)

J112SS Pendent R7816

J112SS Upright R7826

Table A

FP Recessed EscutcheonF1 Recessed Escutcheon

Bulletin 178

December 2019

Page 2 of 5

www.reliablesprinkler.com

Model J112SS Pendent Sprinkler SIN R7816

Technical Specifications

Style: Extended Coverage Pendent

Threads: 3/4” NPT or ISO 7-1R3/4

Nominal K-Factor: 11.2 (160 metric)

Max. Working Pressure: 175 psi (12 bar)

Min. Spacing: 8 ft. (2.4 m)

Material Specifications

Thermal Sensor: 3mm Glass Bulb

Cap: Type 316 stainless steel

Frame: Type 316L stainless steel

Sealing Washer: Beryllium-nickel alloy gold plated

per MIL-G-45204, Type 3, Class 2 w/ PTFE tape on

both sides.

Load Screw: Type 316 stainless steel

Kick Spring: Type 302 stainless steel

Deflector: Type 316 stainless steel

Sprinkler Wrench

Model J1

Model RJ (recessed)

Finishes

None

White Polyester

Black Polyester

Custom Color Polyester

Sensitivity

(See Table B)

Temperature Rating

155°F (68°C)

200°F (93°C)

286°F (141°C)

Recessed Escutcheons

F1-3/4” (19mm) adjustment (Ordinary Hazard only)

FP-1/2” (13mm) adjustment

Listings and Approvals

cULus Listed for Light and Ordinary Hazard

cULus Listed as Corrosion Resistant

Max. Spacing

ft. x ft.

(m x m)

Light Hazard Ordinary Hazard

Group 1

Ordinary Hazard

Group 2

Flow

gpm (l/m)

Pressure

psi (bar)

Flow

gpm (l/m)

Pressure

psi (bar)

Flow

gpm (l/m)

Pressure

psi (bar)

12 x 12

(3.7 x 3.7)

30 (114)

7.2 (0.50)

30 (114)

7.2 (0.50)

39 (148)

12.1 (0.8)

14 x 14

(4.3 x 4.3)

30 (114)

7.2 (0.50)

30 (114)

7.2 (0.50)

39 (148)

12.1 (0.8)

16 x 16

(4.9 x 4.9)

30 (114)

7.2 (0.50)

39 (148)

12.1 (0.8)

51 (193)

20.7 (1.4)

18 x 18

(5.5 x 5.5)

33 (125)

8.7 (0.60)

49 (186)

19.1 (1.3)

65 (246)

33.7 (2.3)

20 x 20

(6.1 x 6.1)

40 (152)

12.8 (0.88)

60 (227)

28.7 (2.0)

80 (303)

51.0 (3.5)

Table B

QR = Quick-response

SR = Standard-response

Listed Design Criteria and Sensitivity

Model J112SS Pendent Sprinkler Components Figure 1

Bulletin 178

December 2019

Page 3 of 5

www.reliablesprinkler.com

Model J112SS Upright Sprinkler SIN R7826

Technical Specifications

Style: Extended Coverage Upright

Threads: 3/4” NPT or ISO 7-1 R3/4

Nominal K-Factor: 11.2 (160 metric)

Max. Working Pressure: 175 psi (12 bar)

Min. Spacing: 8 ft. (2.4 m)

Material Specifications

Thermal Sensor: 3mm Glass Bulb

Cap: Type 316 stainless steel

Frame: Type 316L stainless steel

Sealing Washer: Beryllium-nickel alloy gold plated

per MIL-G-45204, Type 3, Class 2 w/ PTFE tape on

both sides.

Load Screw: Type 316 stainless steel

Kick Spring: Type 302 stainless steel

Deflector: Type 316 stainless steel

Sprinkler Wrench

Model J1

Finishes

None

White Polyester

Black Polyester

Custom Color Polyester

Sensitivity

(See Table C)

Temperature Rating

155°F (68°C)

200°F (93°C)

286°F (141°C)

Listings and Approvals

cULus Listed for Light and Ordinary Hazard

cULus Listed as Corrosion Resistant

Max. Spacing

ft. x ft.

(m x m)

Light Hazard Ordinary Hazard

Group 1

Ordinary Hazard

Group 2

Flow

gpm (l/m)

Pressure

psi (bar)

Flow

gpm (l/m)

Pressure

psi (bar)

Flow

gpm (l/m)

Pressure

psi (bar)

12 x 12

(3.7 x 3.7)

30 (114)

7.2 (0.50)

30 (114)

7.2 (0.50)

39 (148)

12.1 (0.8)

14 x 14

(4.3 x 4.3)

30 (114)

7.2 (0.50)

30 (114)

7.2 (0.50)

39 (148)

12.1 (0.8)

16 x 16

(4.9 x 4.9)

30 (114)

7.2 (0.50)

39 (148)

12.1 (0.8)

51 (193)

20.7 (1.4)

18 x 18

(5.5 x 5.5)

33 (125)

8.7 (0.60)

49 (186)

19.1 (1.3)

65 (246)

33.7 (2.3)

20 x 20

(6.1 x 6.1)

40 (152)

12.8 (0.88)

60 (227)

28.7 (2.0)

80 (303)

51.0 (3.5)

Table C

QR = Quick-response

SR = Standard-response

Listed Design Criteria and Sensitivity

Model J112SS Upright Sprinkler Components Figure 2

Bulletin 178

December 2019

Page 4 of 5

www.reliablesprinkler.com

The Model J112SS pendent and upright sprinklers are cULus Listed for installation under concrete tee construction in accordance

with the following specific application criteria:

• Max. Tee Depth: 2’- 6” (0.8m)

• Max. Tee Stem Spacing: 7’- 6” (2.3m)

• Min. Tee Stem Spacing: 3’- 0” (0.9m)

• Max. Tee Length: 32’- 0” (9.8m) or baffles not less than the depth of the tees must be installed so that the longitudinal space

between baffles does not exceed 32ft (9.8m) in length.

• Max. Deflector distance below Tee: 1” (25mm)

• Comply with obstructions to the Sprinkler Discharge Pattern Development requirements of the NFPA13 where deflector is lo-

cated above bottom of tee.

Model J112SS Specific Application Criteria for Use Under Concrete Tee Construction cULus Listed

Figure 5

Model F1 Escutcheon

Installation Dimensions

Figure 4

Model FP Escutcheon

Installation Dimensions

Figure 3

Application and Installation for Use Under Concrete Tee

1” (25mm) max.

2’-6” (0.8m)

max.

7’-6” (2.3m) max.

3’-0” (0.9m) min.

Note: The Model FP or F1 may be used for ordinary hazard occupancies. For light hazard occupancies, the Model FP recessed

escutcheon must be used. Model J112SS sprinklers with Model F1 recessed escutcheon are not listed for use in light hazard

occupancies.

P/N 9999970524

Bulletin 178

December 2019

Page 5 of 5

www.reliablesprinkler.com

Installation

Glass bulb sprinklers have orange bulb protectors to minimize

bulb damage during shipping, handling, and installation. Re-

liable sprinkler installation wrenches are designed to install

sprinklers with bulb protectors in place. Remove the bulb pro-

tector at the time when the sprinkler system is placed in service

for fire protection. Removal of the bulb protector before this time

may leave the bulb vulnerable to damage. Remove bulb protec-

tors by undoing the clasp by hand. Do not use tools to remove

bulb protectors.

Model J112SS series sprinklers must be installed with the Re-

liable sprinkler installation wrench identified in this Bulletin.

Any other wrench may damage the sprinkler. Recommended

installation torque is 14 to 20 lb.ft (19 to 27 N.m). Do not tighten

sprinklers over the maximum recommended installation torque.

Exceeding the maximum recommended installation torque may

cause leakage or impairment of the sprinkler.

Recessed pendent sprinklers are to be installed as shown in

Fig. 4 or Fig 5., as applicable to the specific model being in-

stalled. Model J112SS series recessed pendent sprinklers may

only be installed with the Reliable Model F1 or Model FP re-

cessed escutcheon. The use of any other recessed escutcheon

will void all approvals and negate all warranties. The Reliable

Model FP escutcheon may not be used in ceilings having pos-

itive pressure with respect to the space below. Ensure that the

openings in the Model FP escutcheon/can assembly are unob-

structed following installation.

Maintenance

Model J112SS series sprinklers should be inspected and the

sprinkler system maintained in accordance with NFPA 25. Do

not clean sprinklers with soap and water, ammonia or any other

cleaning fluids. Remove dust by gentle vacuuming. Replace

any sprinkler which has been painted (other than factory ap-

plied) or damaged in any way. A stock of spare sprinklers

should be maintained to allow quick replacement of damaged

or operated sprinklers. Prior to installation, sprinklers should

be maintained in the original cartons and packaging until used

to minimize the potential for damage to sprinklers that would

cause improper operation or non-operation.

Model J1 Wrench Model RJ Wrench

Listings and Approvals

Listed by Underwriters Laboratories, Inc. and certified by

Underwriters Laboratories of Canada (cULus)

UL Listing Category

Sprinklers, Automatic and Open Extended Coverage Sprinklers

UL Guide Number – VNIV.

Ordering Information

Specify:

1. Sprinkler Model: [J112SS Pendent] [J112SS Upright]

2. Temperature Rating: [155°F (68°C)] [200°F (93°C)]

[286°F (141°C)]

3. Finish: [None] [White Polyester] [Black Polyester]

[Custom Color Polyester]

4. Escutcheon: (Pendent Only)

Model F1 (Ordinary Hazard Only)

Model FP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Reliable Bewässerungssystem Handbücher

Reliable

Reliable F3QR Bedienungsanleitung

Reliable

Reliable J168 Bedienungsanleitung

Reliable

Reliable Concealer G4A Bedienungsanleitung

Reliable

Reliable F1FR56 Bedienungsanleitung

Reliable

Reliable DD56-6 Handbuch

Reliable

Reliable DDX PrePaK D Wartungshandbuch

Reliable

Reliable N252 EC Bedienungsanleitung

Reliable

Reliable G5-56 300 Bedienungsanleitung

Reliable

Reliable F3-56 Series Bedienungsanleitung

Reliable

Reliable HL22 Handbuch

Reliable

Reliable F1 Res 30 LL Bedienungsanleitung

Reliable

Reliable HL22 Bedienungsanleitung

Reliable

Reliable JL-17 Bedienungsanleitung

Reliable

Reliable F1FR-FS Series Bedienungsanleitung

Reliable

Reliable N25 ESFR Bedienungsanleitung

Reliable

Reliable F3QR80 Dry Pendent Bedienerhandbuch

Reliable

Reliable F4FR Bedienungsanleitung

Reliable

Reliable LT56 Series Bedienungsanleitung

Reliable

Reliable DH80 Dry Bedienungsanleitung

Reliable

Reliable F1 56 Bedienungsanleitung

Reliable

Reliable GL 112 Bedienungsanleitung

Reliable

Reliable DH56 HSW Bedienungsanleitung

Reliable

Reliable DDX Type D Wartungshandbuch

Reliable

Reliable F1FR-FS LO Handbuch

Beliebte Bewässerungssystem Handbücher anderer Marken

Hunter

Hunter Institutional Series Bedienungsanleitung

Cellfast

Cellfast 52-305 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL A Bedienungsanleitung

Oral Care Technologies

Oral Care Technologies Hydro Floss Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F892 Bedienungsanleitung

Netafim

Netafim NETBEAT Bedienungsanleitung

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Bedienungsanleitung

Tyco

Tyco CC3 Bedienungsanleitung

OpenSprinkler

OpenSprinkler OSPi Bedienungsanleitung

EINHELL

EINHELL GE-WW 5537 E Bedienungsanleitung

Valley

Valley Bender160 Bedienungsanleitung

Toro

Toro 730 Series Kurzanleitung

Eden

Eden 97063-EDAMZ Bedienungsanleitung

Tyco

Tyco TY-L Series Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL ELO-231 Bedienungsanleitung

Johnson Controls

Johnson Controls tyco ESFR-17 Bedienungsanleitung

Victaulic

Victaulic VicFlex I-VICFLEX.AQC-U Bedienungsanleitung