Reliable F3-80 Dry Pendent Bedienungsanleitung
Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
Model F3-80 Dry
K8.0 (115 metric)
Standard-Response,
Standard Spray Sprinklers
Bulletin 060 February 2021
Bulletin 060 February 2021
Features
1. Available in the following congurations:
• Pendent with standard escutcheon
• Pendent with Model HB extended escutcheon
• Pendent with Model FP recessed escutcheon
• Concealed Pendent with Model CCP cover plate
• Horizontal Sidewall with Standard escutcheon
• Horizontal Sidewall with Model HB extended escutch-
eon
• Horizontal Sidewall with Model FP recessed escutch-
eon
2. Available with 1” NPT or ISO7-1R1 inlet tting.
3. Sprinklers, escutcheons, and cover plates are available
in a wide variety of standard and special application n-
ishes.
4. White polyester and black polyester nish sprinklers are
cULus Listed as Corrosion Resistant.
Product Description
Model F3-80 Dry sprinklers are standard-response, stan-
dard coverage sprinklers with a nominal K-Factor of 8.0
(115 metric). Model F3-80 Dry sprinklers all use a 5 mm
glass bulb operating element. See the Temperature Rat-
ings table in this Bulletin for available temperature ratings.
Model F3-80 Dry sprinklers are intended for installation on
wet-pipe, dry-pipe, or preaction sprinkler systems in accor-
dance with NFPA 13.
Model F3-80 Dry sprinklers are available with a variety
of escutcheon options as illustrated in Figs. 1 through 3
and Figs. 5 through 7. In addition, Model F3-80 Dry Pen-
dent sprinklers are also available with the Model CCP coni-
cal concealed cover plate as illustrated in Fig. 4. Available
sprinkler, escutcheon, and cover plate nishes are identied
in the Finishes table in this Bulletin. The Model FP escutch-
eon, and Model CCP cover plate are the only recessed es-
cutcheons and cover plate listed for use with Model F3-80
Dry sprinklers; the use of any other recessed escutcheon
or cover plate with Model F3-80 Dry sprinklers will void all
guarantees, warranties, listings and approvals.
Inlet ttings are available with 1” NPT or ISO 7-1R1
threads.
See the Available Congurations, Listings, and Approvals
table in this Bulletin for further information on Model F3-80
Dry sprinklers.
CCP Cover Plate
(See Fig. 4)
FP Recessed Escutcheon
(See Fig. 3)
Standard Escutcheon
(See Fig. 1)
HB Escutcheon
(See Fig. 2)
Recessed FP
Horizontal Sidewall
(See Fig. 7)
Horizontal Sidewall / HB
(See Fig. 6)
Horizontal Sidewall
(See Fig. 5)
2.
Available Congurations, Listings, and Approvals
Sprinkler
Model
Escutcheon or
Cover Plate
Available Length
(See Figs. 1 - 7)
Listings and
Approvals(1)
Inlet
Threads
Sprinkler Identication
Number (SIN)
F3-80 Dry
Pendent
Standard
Escutcheon
2” to 36”
(50 to 914 mm)
cULus, NYC
1” NPT
or
ISO7-1R1
RA6012
HB Extended Escutcheon 3-1/2” to 36”
(90 to 914 mm)
FP Recessed Escutcheon
CCP Cover Plate
F3-80 Dry
Horizontal Side-
wall
Standard Escutcheon 2” to 36”
(50 to 914 mm) cULus(2), NYC(2)
1” NPT
or
ISO7-1R1 RA6032
HB Extended Escutcheon 3-1/2” to 36”
(90 to 914 mm)
FP Recessed Escutcheon
(1) For available temperature ratings and nishes see the Temperature Ratings and Finishes tables, respectively, in this Bulletin.
(2) cULus Listing and NYC for Light Hazard (existing) and Ordinary Hazard only.
Listing and Approval Agencies
See the Available Congurations, Listings, and Approvals table in this Bulletin for listings and approvals applicable to each
available conguration.
1. Listed by Underwriters Laboratories, Inc. and UL Certied for Canada (cULus)
2. Permitted in New York City based on UL Listing per Local Law 33/2007 (NYC)
Technical Data
Maximum Listed and Approved Working Pressure: 175 psi (12 bar)
Nominal K-Factor: 8.0 gpm/psi1/2 (115 L/min/bar1/2)
Temperature
Classication Glass Bulb Color Sprinkler
Temperature Rating
Cover Plate
Temperature Rating
Maximum Ceiling
Temperature
Listings and
Approvals(1)
Ordinary Orange 135°F (57°C) 135°F (57°C) 100°F (38°C)
cULus, NYC
Red 155°F (68°C)
Intermediate Yellow 175°F (79°C) 165°F (74°C) 150°F (66°C)
Intermediate Green 200°F (93°C) 165°F (74°C) 150°F (66°C)
High Blue 286°F (141°C) None 225°F (107°C)
165°F (74°C) 150°F (66°C)
(1) For listed and approved sprinkler, escutcheon, and inlet congurations see the Available Congurations, Listings, and Approvals table in this Bulletin.
Finishes
Component Sprinkler Escutcheon(1) Cover Plate
Standard Finishes
Bronze Brass(3) White Paint
White Polyester(2) White Polyester Chrome
Chrome Chrome
Special Application Finishes
Electroless Nickel PTFE(2) Type 316 Stainless Steel
Satin Chrome
Black Paint
Custom Color Paint
Black Plating
Black Polyester(2) Black Polyester
Custom Color Polyester
Customer Color Polyester
Wax Coated(4)
High Temp. Wax Coated(5)
Lead Plated(4)
Wax Over Lead(4)
High Temp. Wax Over Lead(5)
(1) Standard and Model HB escutcheons are supplied with both the can and escutcheon nished. Model FP escutcheons are supplied with the escutcheon nished;
the cup is galvanized or stainless steel with no further nish.
(2) cULus Listed as a Corrosion Resistant Sprinkler.
(3) Brass nish available for standard Model FP escutcheons only.
(4) Wax coating, lead plating, and wax over lead nishes are Listed and available for 155°F (68°C), 175°F (79°C), and 200°F (93°C) activation temperature sprinklers
only.
(5) High temperature wax coating and high temperature wax over lead nishes are Listed and available for 286°F (141°C) activation temperature sprinklers only and
shall only be installed where maximum ceiling temperature does not exceed 150°F (66°C).
3.
Note: The sprinkler can protrudes ¼” when escutcheon is in nominal position. Escutcheon adjustment provides -¼” (-6mm) to +1¼” (+32mm) “A” dimen-
sion adjustment range.
Fig. 1
Model F3-80 Dry Pendent Sprinkler with Standard Escutcheon (SIN RA6012)
“A” Dim. 2” to 36” (51mm to 914mm) in 1/4” (6mm) increments
Model F3-80 Dry Pendent Sprinkler with Model HB Extended Escutcheon (SIN RA6012)
“A” Dim. 3½” to 36” (89mm to 914mm) in 1/4” (6mm) increments
Note: The sprinkler can protrudes 1¼” when escutcheon is in nominal position. Escutcheon adjustment provides -½” (-12.7mm) to +½” (+12.7mm) “A”
dimension adjustment range.
Fig. 2
4.
Note: Do not install the Model F3-80 Dry Pendent sprinkler with the Model FP escutcheon in ceilings which have positive pressure in the space above.
Fig. 3
5.
Model F3-80 Dry Pendent Sprinkler with Model FP Recessed Escutcheon (SIN RA6012)
“A” Dim. 31/2” to 36” (89mm to 914mm) in 1/4” (6mm) increments
Model F3-80 Dry Pendent Sprinkler with Model CCP Cover Plate (SIN RA6012)
“A” Dim. 31/2” to 36” (89mm to 914mm) in 1/4” (6mm) increments
Note: Do not install the Model F3-80 Dry Pendent sprinkler with the Model CCP cover plate in ceilings which have positive pressure in the space above.
Fig. 4
6.
Note: The sprinkler can protrudes ¼” when escutcheon is in nominal position. Escutcheon adjustment provides -¼” (-6mm) to +1¼” (+32mm) “A” dimen-
sion adjustment range.
Fig. 5
7.
Model F3-80 Dry Horizontal Sidewall Sprinkler with Standard Escutcheon (SIN RA6032)
“A” Dim. 2” to 48” (51mm to 1219mm) in 1/4” (6mm) increments for 1” connections or 2”
to 36” (51mm to 914mm) in 1/4” (6mm) increments for 3/4” connections
8.
Model F3-80 Dry Horizontal Sidewall Sprinkler with Model HB Escutcheon (SIN RA6032)
“A” Dim. 31/2” to 48” (89mm to 1219mm) in 1/4” (6mm) increments for 1” connections or
3½” to 36” (89mm to 914mm) in 1/4” (6mm) increments for 3/4” connections
Note: The sprinkler can protrudes 1¼” when escutcheon is in nominal position. Escutcheon adjustment provides -½” (-12.7mm) to +½” (+12.7mm) “A”
dimension adjustment range.
Fig. 6
9.
Model F3-80 Dry Horizontal Sidewall Sprinkler with Model FP Recessed Escutcheon (SIN RA6032)
“A” Dim. 31/2” to 48” (89mm to 1219mm) in 1/4” (6mm) increments for 1” connections or
3½” to 36” (89mm to 914mm) in 1/4” (6mm) increments for 3/4” connections
Note: Do not install the Model F3-80 Dry Horizontal Sidewall sprinkler with the Model FP escutcheon in walls which are positively pressurized with respect
to the protected space.
Fig. 7
10.
Fig. 8
Andere Handbücher für F3-80 Dry Pendent
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Reliable Bewässerungssystem Handbücher
Reliable
Reliable KFR56 Series Bedienungsanleitung
Reliable
Reliable F1FR-SS Series Bedienungsanleitung
Reliable
Reliable F1FR40 Handbuch
Reliable
Reliable F1S5-FSLO Bedienungsanleitung
Reliable
Reliable F1FR56 Handbuch
Reliable
Reliable DDX PrePaK D Wartungshandbuch
Reliable
Reliable RFC30 Bedienungsanleitung
Reliable
Reliable F1-SS Series Bedienungsanleitung
Reliable
Reliable F156 EC Series Bedienungsanleitung
Reliable
Reliable DH56 HSW-PL Handbuch
Reliable
Reliable JL-14 Bedienungsanleitung
Reliable
Reliable F1FR56-300 Series Handbuch
Reliable
Reliable RFS42 Benutzerhandbuch
Reliable
Reliable F3QR56 Bedienungsanleitung
Reliable
Reliable F1FR-300 Bedienungsanleitung
Reliable
Reliable Concealer G4A Bedienungsanleitung
Reliable
Reliable F1FR56 Bedienungsanleitung
Reliable
Reliable GXLO Series Handbuch
Reliable
Reliable G5 Series Bedienungsanleitung
Reliable
Reliable F156 Series Handbuch
Beliebte Bewässerungssystem Handbücher anderer Marken
Hunter
Hunter Institutional Series Bedienungsanleitung
Cellfast
Cellfast 52-305 Bedienungsanleitung
Tyco Fire Product
Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung
Tyco Fire Product
Tyco Fire Product CENTRAL A Bedienungsanleitung
Oral Care Technologies
Oral Care Technologies Hydro Floss Bedienungsanleitung
Tyco Fire Product
Tyco Fire Product Gem F892 Bedienungsanleitung
Toro
Toro 730 Series Kurzanleitung
Eden
Eden 97063-EDAMZ Bedienungsanleitung
Tyco
Tyco TY-L Series Bedienungsanleitung
Tyco Fire Product
Tyco Fire Product CENTRAL ELO-231 Bedienungsanleitung
Johnson Controls
Johnson Controls tyco ESFR-17 Bedienungsanleitung
Victaulic
Victaulic VicFlex I-VICFLEX.AQC-U Bedienungsanleitung