Remington Shortcut clipper SCC-100R Bedienungsanleitung

For the Easiest and

Most Even Haircut Ever!

SCC-100R

SCC-100RC

Use and

Care Guide

By registering your new Remington®product, you will receive these important benefits:

Proof of Ownership • Product Protection • Product Registration • Special Offers

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance,

basic precautions should always be

observed, including the following.

READ ALL

INSTRUCTIONS

BEFORE USING

THIS APPLIANCE.

DANGER

To reduce the risk of electric shock:

■Do not reach for an appliance that

has fallen into water. Unplug it

immediately.

■Use only when the appliance is

in dry condition.

■Detach the appliance from the

power supply cord before cleaning.

■Do not submerge this appliance in

water.

■Do not place or drop into water

or other liquid.

■Do not place or store this appliance

where it can fall or be pulled into a

tub or sink.

■Except when charging, always

unplug this appliance from the

electrical outlet immediately

after using.

■Unplug this appliance before

cleaning it.

WARNING

To reduce the risk of burns, fire,

electric shock or injury to persons:

■This appliance is for household use

only.

■An appliance should never be left

unattended when it’s plugged

in, except when charging a

rechargeable appliance.

■Close supervision is necessary

when this appliance is used by,

on, or near children or persons

with disabilities.

■Use this appliance only for its

intended use as described in this

manual. Do not use attachments

not recommended by Spectrum

Brands, Inc.

■Keep the cord away from heated

surfaces.

■Never operate this appliance if

it has a damaged cord or plug,

if it is not working properly, if it

has been dropped or damaged,

or if it has been dropped into

water. If the appliance is within

the warranty period, return the

appliance to Spectrum Brands,

Inc., 601 Rayovac Drive, Madison,

WI 53711.

■Never drop or insert any object into

any of the appliance’s openings.

■Do not use outdoors or operate

where aerosol (spray) products are

being used, or where oxygen is

being administered.

■Always store this appliance and

cord in a moisture-free area. Make

sure the cord is disconnected from

the clipper.

■Do not use this appliance with a

damaged or broken cutter unit,

as injury may occur. Always make

sure blades are aligned properly.

■Always attach plug to appliance,

then adapter to outlet. To disconnect,

turn all controls to OFF, then remove

adapter from outlet, then detach

power cord from the clipper for

storage.

Contents

English ................................ 1

Spanish ........................... 13

French .............................. 25

■Dispose of used batteries properly.

Do not incinerate. Batteries may

explode if overheated. Do not wrap

in metal or aluminum foil. Wrap in

newspaper before discarding. It is

suggested that you contact local

battery redemption site(s) in your

area.

■The power unit is intended to be

correctly oriented in a vertical or

floor mount position.

SAVE THESE INSTRUCTIONS

Product Features

(A) Adjustable Guide Comb

(B) Charging LED

(D) On/Off Button

(E) Pop-Out Trimmer Release Button

(F) Pop-Out Trimmer

(G) 5-Position Zoom Wheel

(H) Blade Oil

(I) Cleaning Brush

(J) Balding Comb

(K) Charging Adapter

Clipper Parts

Congratulations on your purchase of one of the finest hair clippers available

today. Your Remington®Shortcut Clipper is designed to perform dependably

and efficiently for years, helping you maintain a short hair cut.

(A)

(F)

(E)

(D)

(G)

(H)

(I)

(K) (J)

SETTING

Your Shortcut Clipper comes with a balding

comb attached for ultra-close haircuts. For

longer lengths, use the adjustable guide

comb and the zoom wheel.

The 5-position zoom wheel provides a

choice of cutting lengths for a consistent

trim every time. Adjust the trimming length

by rotating the zoom wheel to the desired

position number. Refer to the chart below

for the position number of your desired

hair length.

5-position zoom wheel

1 1½ 2 3 4

1/8" 3/16" 1/4" 3/8" 1/2"

LENGTH

How to Use

Be sure to read all safety instructions

and warnings at the front of this

manual before using this product.

Charging/Recharging

To recharge, use only the charging

adapter provided.

■Turn the clipper off. Insert the

adapter plug into the bottom of the

clipper, then plug the adapter into

an electric outlet. The charging

indicator will glow blue, indicating

the unit is charging. A full charge

will take approx. 14-16 hours.

The low-battery indicator will glow

red when the clipper needs to be

recharged.

■Your clipper cannot be

overcharged. You may leave

it plugged in between uses.

However, if the clipper is not going

to be used for an extended period

(2 weeks), unplug the unit and

recharge when resuming use.

■Charge the clipper at temperatures

between 40-90˚F to avoid

adversely affecting battery life.

Before Cutting Hair

1. Make sure the hair clipper is

running smoothly and is charged.

2. Ensure the

hair is dry.

Hair clippers

perform best

with dry hair,

making it

easier to see

how much

hair is being

cut.

3. Hold the hair clipper in the palm

of your hand similar to how you

would hold a hairbrush.

Ultra Short Hair Length

The Shortcut Clipper comes with a

balding comb attached. An adjustable

guide comb for longer hair lengths is

included. To use the balding comb,

simply begin trimming your hair with

a fully-charged clipper.

Selecting Hair Length Setting

The Shortcut Clipper has an adjust-

able guide comb that lets you

change trim lengths simply by rolling

the clipper’s zoom wheel.

■Replace the balding comb

attachment with the adjustable

guide comb.

■Roll the zoom wheel toward the top

of the clipper to adjust for longer

length, and toward the bottom of

the clipper for

shorter length.

The wheel

will click into

one of five

positions.

■Begin

trimming

at one of

the longest

settings (#3 or #4) to avoid

accidentally trimming hair too

short. As you become familiar with

the settings, you can then select

your desired length setting.

NOTE: The adjustable guide comb

must be attached to the clipper in

order to use the hair length selector.

To remove a comb:

■ Be sure the clipper is in the OFF

position.

■ While holding clipper in one hand

and holding the zoom wheel to

prevent it from turning, gently pull

the comb away from the clipper.

The combs can be removed and

replaced on any setting.

To replace a comb:

■Be certain clipper is in OFF

position.

■While holding the clipper in one

hand, and holding the zoom wheel

to prevent it from turning, slide the

comb over the top of the clipper

until it clicks into position.

NOTE: The combs can only be placed

on the clipper one way; if the comb

does not fit properly, remove and

reverse it.

Adjustable Guide Comb

Balding Comb

4. To trim around the ears and short

hairs at the

nape of the

neck simply

press the

release button

and slide

the pop-up

detail trimmer

outward. Be

careful not to

touch the ears or to press too hard.

5. Make sure to check over the entire

head for any uneven areas.

Giving a Comfortable,

Even Cut

Allow the clipper to cut through the

hair without moving it too quickly.

Moving the clipper too quickly may

create a pulling sensation.

Use short strokes when cutting, and

initially use the longest setting. You

can always use a closer setting later

if you want a closer cut.

How to Give a Haircut

1. Start at the back of the head.

Holding the clipper as shown,

lightly stroke upward making sure

you are taking off the desired

amount of hair. Work your way up

to the crown of the head. When

completed, move clipper over and

cut down the head to the nape

of the neck. The SCC-100R is a

bidirectional hair cutter so you can

cut in either direction.

2. Repeat the same procedure across

the back of the head. Make sure

the length of the hair is trimmed to

the same length on both sides of

the head.

3. To cut the hair at the top of the

head, cut

from the

front to the

back in both

directions

until the

hair is cut to

the desired

length.

Usage Tips

Cleaning

Before You Begin

1. The hair clipper shall be detached

from the power supply cord before

cleaning.

2. The hair clipper shall not be used

until it has dried.

How To Clean

1. First remove the attached comb

from the clipper by pulling it firmly

away from the blades.

2. For best

results, you

can remove

the inside

blade guard

to expose the

blades.

3. Then use

the brush

provided to

sweep away hair clippings from

the product.

4. This device can also be rinsed

under the faucet to remove any

remaining debris.

5. After cleaning is complete,

reassemble the blade guard to

the product by snapping it into its

original position.

6. Reattach the comb to the product.

Note: After rinsing, the blades should

be oiled for optimum performance

and product life.

Blade Care

The life of your clippers will depend

on frequency of use, care, and hair

type and condition. The Shortcut

Clipper blades are lubed for life for

your convenience. However, if you

rinse the product under running

water, an oil bottle has been provided

to re-oil the blades.

Cleaning and Maintenance

This appliance is a

washable product,

the hand-held part

of which may be

cleaned under water.

Maintenance

This appliance has no user service-

able parts.

Battery Removal

Storage

■

Always store this appliance and

cord-adapter in a moisture-free

area. Do not store it in temperatures

exceeding 140°F (60°C).

■ Do not wrap the cord around the

appliance.

The following procedure should be

followed for battery removal prior to

disposing of the product:

1. Make sure the clipper is unplugged

from any outlets so you don't risk

an electrical shock.

2. With a flat head screwdriver, gently

pry the top cover from the unit. This

will expose the internal circuitry

compartment.

3. With a Phillips head screwdriver,

remove the four screws on the

circuitry compartment top cover.

4. Locate 6 latches around the

perimeter of the circuitry

compartment and pry each to

loosen top cover.

5. Remove cover to expose the

batteries and circuitry.

6. Clip the wires connecting the

batteries to the circuit board and

remove the batteries.

Andere Handbücher für Shortcut clipper SCC-100R

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Remington Haarschneider Handbücher

Remington

Remington HC5950 Bedienungsanleitung

Remington

Remington Easy Fade Pro HC550 Bedienungsanleitung

Remington

Remington PrecisionCut HC5300 Bedienungsanleitung

Remington

Remington HC6550 Bedienungsanleitung

Remington

Remington HC5015 Bedienungsanleitung

Remington

Remington X3 POWER-X Series Bedienungsanleitung

Remington

Remington HC-60 Bedienungsanleitung

Remington

Remington HC331 Bedienungsanleitung

Remington

Remington X5 Power-X Series Bedienungsanleitung

Remington

Remington ProPower HC5200 Bedienungsanleitung

Remington

Remington HC5960 Bedienungsanleitung

Remington

Remington HC340 Bedienungsanleitung

Remington

Remington HC335 Bedienungsanleitung

Remington

Remington RAPID CUT TURBO HC4300AU Bedienungsanleitung

Remington

Remington HC6525 Bedienungsanleitung

Remington

Remington HC-5350 Bedienungsanleitung

Remington

Remington Power X Series Bedienungsanleitung

Remington

Remington HC905 Bedienungsanleitung

Remington

Remington Omniblade HG1000 Bedienungsanleitung

Remington

Remington X5 Power-X Series Bedienungsanleitung

Remington

Remington PrecisionCut HC5500 Bedienungsanleitung

Remington

Remington HC5950 Bedienungsanleitung

Remington

Remington HC5018 Bedienungsanleitung

Remington

Remington HC5800 Bedienungsanleitung

Beliebte Haarschneider Handbücher anderer Marken

Clatronic

Clatronic HSM 800 Bedienungsanleitung

Mellerware

Mellerware MACRO ALDANY MA20001 Bedienungsanleitung

VALERA

VALERA X-Master 652 Bedienungsanleitung

Wahl

Wahl 1870Li Bedienungsanleitung

Lister

Lister Legend Bedienungsanleitung

Philips

Philips HC5440/80 Bedienungsanleitung

Andis

Andis MBA 23125 Bedienungsanleitung

Philips

Philips Philishave HQC488/61 Bedienungsanleitung

Shear Magic

Shear Magic Nifty 1800 Bedienungsanleitung

Philips

Philips QC5390 Bedienungsanleitung

Andis

Andis US-1 Kurzanleitung

Panasonic

Panasonic EH-KA81 Bedienungsanleitung

Philips

Philips HC5450 Bedienungsanleitung

Andis

Andis US-1 Montageanleitung

Andis

Andis ML Montageanleitung

O'Barber

O'Barber MINI SLIDE Bedienungsanleitung

Oster

Oster 76110 Bedienungsanleitung

Hyundai

Hyundai HC 420 Bedienungsanleitung