Renishaw Quarryman Pro Bedienungsanleitung

Hardware manual

H-5915-8503-02-B

Quarryman®Pro

Disclaimer

RENISHAW HAS MADE CONSIDERABLE

EFFORTS TO ENSURE THE CONTENT OF

THIS DOCUMENT IS CORRECT AT THE

DATE OF PUBLICATION BUT MAKES NO

WARRANTIES OR REPRESENTATIONS

REGARDING THE CONTENT. RENISHAW

EXCLUDES LIABILITY, HOWEVER ARISING,

FOR ANY INACCURACIES IN THIS

DOCUMENT.

Safety

The Quarryman Pro laser scanner is a robust,

ruggedized, ﬁeld instrument whose applications

include the 3D mapping of entire quarry or mine

sites, determination of 3D rock face geometry,

blast design and volumetric surveying of

stockpiles and reserves. Unit range has been

increased to 750 m to non-reﬂective surfaces.

It is essential that the unit and all accessories

are operated in accordance with the instructions

in this user manual and it is the responsibility

of the user to ensure that, in the event of a

failure on any part of the Renishaw system, the

equipment remains safe.

In the case of equipment with powers or speeds

capable of causing injury, it is essential that

appropriate safety measures are incorporated

into the equipment operation. Further guidance

can be found in the European Standard EN292

Safety of machinery – General principles of

design – Risk assessment and risk reduction.

The safety of any operations involving the

Quarryman Pro system is the responsibility of

the operator.

This document may not be copied or reproduced

in whole or in part, or transferred to any other

media or language, by any means, without the

prior written permission of Renishaw plc.

The publication of material within this document

does not imply freedom from the patent rights of

Renishaw plc.

Trade marks

RENISHAW and the probe symbol used in the

RENISHAW logo are registered trade marks of

Renishaw plc in the United Kingdom and other

countries. apply innovation and names and

designations of other Renishaw products and

technologies are trade marks of Renishaw plc or

its subsidiaries.

All other brand names and product names used

in this document are trade names, trade marks,

or registered trade marks of their respective

owners.

Care of equipment

Renishaw’s Quarryman Pro 3D laser scanning

system and associated accessories are

precision products and must therefore be

treated with care.

Changes to Renishaw products

Renishaw plc reserves the right to

improve, change or modify its products and

documentation without incurring any obligation

to make changes to equipment previously sold

or distributed.

Renishaw part no: H-5915-8503-02-B

First issued: 12.2014

Revised: 10.2017

Laser safety

DO NOT STARE DIRECTLY

INTO THE BEAM

In accordance with BS EN 60825-1:2014 and

US standards 21CFR 1040.10 and 1040.11

except for deviations pursuant to Laser Notice

no. 50, dated June 24, 2007, the Quarryman

Pro laser proﬁling system is classiﬁed as a

Class 2 combined invisible and invisible laser

product. Protective eyewear is not deemed

necessary, as the unit is designed to be safe for

momentary exposures, but can be hazardous

for deliberate staring into the beam. Note that

dazzle, ﬂash blindness and after-images may

result upon eye exposure to the visible laser

source, particularly under low ambient light

conditions. Users are instructed by labelling not

to stare into the beam, i.e. avoid continuous

intentional intrabeam viewing! Eye protection,

designed to provide adequate protection

against speciﬁc laser wavelengths (905 nm

typically), may be used in hazard areas. Any

exceptions should only be undertaken with the

approval of the local laser safety ofﬁcer. All laser

protective eyewear shall be clearly labelled with

information adequate to ensure proper choice

with the particular laser. For the Quarryman Pro

instrument, the recommended CE marked laser

eyewear shall be marked as “R 905 L1” as a

minimum as speciﬁed to EN 207, or equivalent.

Do not stare into the beam or shine it into

the eyes of others. It is safe to view a diffuse-

reﬂected beam. Do not dismantle the unit in any

way; doing so may expose laser radiation in

excess of Class 2 combined limits.

CAUTION – LASER LIGHT IS BRIGHT AND

BLINDING – DO NOT SHINE AT AIRCRAFT

OR VEHICLES AT ANY DISTANCE.

Safety information

The following symbol is used in this manual

wherever important safety information is

present.

Before proceeding with any

electrical connection or

operation of the laser system,

refer to the general safety

information throughout this

manual.

EC declaration of conformity

Renishaw plc declares that the Fanbeam 5

system and associated accessories comply with

the applicable standards and regulations.

Contact Renishaw plc or visit

www.renishaw.com/fanbeam for the full EC

declaration of conformity.

WEEE

The use of this symbol on Renishaw products

and/or accompanying documentation indicates

that the product should not be mixed with

general household waste upon disposal. It is

the responsibility of the end user to dispose

of this product at a designated collection point

for waste electrical and electronic equipment

(WEEE) to enable reuse or recycling. Correct

disposal of this product will help to save valuable

resources and prevent potential negative effects

on the environment. For more information,

please contact your local waste disposal service

or Renishaw distributor.

Renishaw part no: H-9933-8501-01-A

Issued: February 2015

EC compliance

Renishaw plc declares that the Quarryman Pro

system and associated accessories comply

with the applicable directives, standards and

regulations.

WEEE

The use of this symbol on Renishaw products

and/or accompanying documentation indicates

that the product should not be mixed with

general household waste upon disposal. It is

the responsibility of the end user to dispose

of this product at a designated collection point

for waste electrical and electronic equipment

(WEEE) to enable reuse or recycling. Correct

disposal of this product will help to save valuable

resources and prevent potential negative effects

on the environment. For more information,

please contact your local waste disposal service

or Renishaw distributor.

FCC (USA only)

Information to the user (47CFR section

15.19)

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference, and

2. This device must accept any interference

received, including interference that may

cause undesired operation.

Information to user (47CFR section 15.21)

The user is cautioned that any changes or

modiﬁcations not expressly approved by

Renishaw plc or authorised representative

could void the user’s authority or operate the

equipment.

Information to the user (47CFR section

15.105)

This equipment has been tested and found

to comply with the limits of a Class A digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference when

the equipment is operated in a commercial

environment. The equipment generates, uses

and can radiate radio frequency energy and, if

not installed and used in accordance with this

manual, may cause harmful interference to radio

communications. Operation of this equipment

in a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

Contents

1 Customer information ....................................................1-1

1.1 Dear customer ...................................................1-1

1.2 Product warranty..................................................1-1

1.3 User manual .....................................................1-2

2 Introduction ............................................................2-1

2.1 The Quarryman Pro ...............................................2-1

2.2 Applications......................................................2-2

3 Laser safety ............................................................3-1

3.1 Quarryman Pro laser module with red dot pointer ........................3-1

4 Equipment description ....................................................4-1

4.1 The Quarryman Pro ...............................................4-1

4.2 Control Display Unit (CDU) ..........................................4-2

4.2.1 Primary button functions .....................................4-3

4.2.2 Secondary button functions ...................................4-4

4.2.3 Battery selection............................................4-5

4.2.4 Data entry.................................................4-5

4.2.5 User quick-start guide .......................................4-6

4.3 Laser module ....................................................4-7

4.4 Telescope .......................................................4-7

4.5 Yoke ...........................................................4-8

4.6 Carrying handle with GPS mount .....................................4-8

4.7 Tribrach ........................................................4-10

4.8 Battery pack ....................................................4-11

4.9 Alternative external power connections ...............................4-12

Hardware manual – Quarryman Pro

Contents

4.10 USB drives .....................................................4-14

4.11 Tripod .........................................................4-16

4.12 Transit case.....................................................4-16

4.13 Quarryman Viewer software ........................................4-17

5 Maintenance and care of the Quarryman Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

5.1 General .........................................................5-1

5.2 Preventative maintenance...........................................5-1

5.2.1 In use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

5.2.2 In storage .................................................5-2

5.2.3 In transportation ............................................5-2

5.2.4 General...................................................5-2

6 Using the Quarryman Pro .................................................6-1

6.1 Data ﬁles ........................................................6-1

6.2 Start-up .........................................................6-2

6.3 Main menu ......................................................6-5

6.3.1 Status bar.................................................6-6

6.4 Point and shoot mode ..............................................6-7

6.5 FastScan mode ...................................................6-9

6.7 AutoFix mode ...................................................6-12

6.8 Saved settings...................................................6-13

6.9 Date and time settings ............................................6-14

7 Operational guidelines ....................................................7-1

7.1 System limitations .................................................7-1

7.2 Instrument heights and target heights..................................7-1

7.3 Notes on FastScan options ..........................................7-3

iii

Contents

7.3.1 Deﬁning the scan window.....................................7-3

7.3.2 Scan speed ...............................................7-5

7.3.3 Chord and arc settings .......................................7-6

7.4 Last-hit mode ....................................................7-8

8 Typical operating sequence ................................................8-1

8.1 Positioning the Quarryman Pro .......................................8-1

8.2 Setting up the Quarryman Pro .......................................8-1

8.3 Switching on and starting the survey ..................................8-2

8.4 Resection observations.............................................8-3

8.5 Toe and crest observations ..........................................8-3

8.6 Shooting the hole markers ..........................................8-4

8.7 Scanning the face .................................................8-4

8.8 Scanning ........................................................8-5

8.9 Completing the survey .............................................8-5

9 Troubleshooting guide ....................................................9-1

10 Speciﬁcations..........................................................10-1

11 Declaration of conformity .................................................11-1

Hardware manual – Quarryman Pro

Contents

This page is intentionally left blank

1-1

Customer

information

1 Customer information

1.1 Dear customer

The Quarryman Pro system is designed to be easy to operate. However, we would ask you to take

the time to carefully work through these operating instructions before using the instrument and to

keep the manual with the instrument at all times.

If your system requires servicing or calibration, or if there are questions arising beyond the scope of

this manual, contact Renishaw’s Service and Support Centre. Contact details can be found on the

back page of this manual.

Alternatively, for information on your local Renishaw-approved service centre, visit our website

www.renishaw.com.

To ensure best service, please make a note of your equipment’s serial number, which can be found

on the instrument.

1.2 Product warranty

Unless otherwise speciﬁed, Renishaw plc warrants the equipment for a period of 12 months from

the date of delivery. This warranty is given subject to the following conditions:

• Renishaw plc shall be under no liability in respect of any defects in the equipment arising from

any drawing, design or speciﬁcation supplied or modiﬁcation requested by the customer.

• Renishaw plc shall be under no liability in respect of defects arising from wilful damage,

negligence, abnormal working conditions, failure to follow Renishaw’s instructions (whether oral

or in writing), misuse or alteration or repair of the equipment without Renishaw’s approval.

• Software is not covered by this warranty.

• Claims in respect of defective equipment must be intimated by notice in writing to Renishaw plc

and the equipment must be retained by the customer pending written instructions from

Renishaw.

• Following authorised return of the equipment, which must be made by the customer on freight

prepaid basis, Renishaw will examine the equipment and, if the claim is justiﬁed in Renishaw’s

opinion, will repair the defective equipment or will make replacement without charge. Renishaw

will have no further liability to the customer.

Hardware manual – Quarryman Pro

1-2

Customer

information

1.3 User manual

It is important that you read this manual carefully before using the instrument.

There are two manuals available with the Quarryman Pro system:

1. This Quarryman Pro hardware manual, provided on the supplied USB drive and in hard copy

form;

2. A Quarryman Viewer software manual, provided on the supplied USB drive

This hardware manual describes the Quarryman Pro and all accessories supplied with a standard

system.

Section 8 gives a brief overview of a typical operation. Some troubleshooting tips are also offered in

Section 9, which address some of the most common problems and questions that arise from users

of the Quarryman Pro. A laminated pocket reference guide is also included with the Quarryman

Pro system. This can be used as a quick reference guide, but only when you have had sufﬁcient

equipment training and when you have read the full hardware manual.

This manual has been compiled with care. However, should you discover any errors, we would be

grateful if you could contact Renishaw directly.

Reproduction in whole or in part, including utilisation in machines capable of reproduction or

retrieval, without the express written permission of Renishaw plc is prohibited. Reverse engineering

is also prohibited.

The information in this document is subject to change without notice.

Inhaltsverzeichnis

Andere Renishaw Scanner Handbücher

Renishaw

Renishaw RETROSCAN Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung