Renkforce VisualTable RF-4730964 Bedienungsanleitung
The specifications and information herein are subject to change without notice.
Smart Book Scanner
VisualTable
- 2 -
- Contents -
I_Introduction
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
3
1.
Components
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
3
2.
A quick look at the hardware
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
4
3.
Keyfeatures&functions
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
5
II_Installation
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
6
1.
Theinstallationprocess
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
6
2.
Installing the software
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
7
3.
Installingthehardware
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
11
4.
Installation Precautions
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
12
III_Operating VisualTable
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
13
1.
Getting started
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
13
2. Operating the hardware
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
16
3. Custom settings
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
17
4. Using the program tools
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
21
5. Creating eBook
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
24
IV_Troubleshooting & Precautions ‥‥‥‥‥‥‥‥‥‥‥‥‥
‥
28
1.
Troubleshooting
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
‥
28
2. Precautions
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
28
V_
PrecautionstotakebeforereformattingPC
‥‥‥‥
‥‥‥‥‥
29
I_Introduction
3
I_Introduction
1. Components
-
Main Body
-
Commoncomponents
Poweradapter Power cable USB cable Installation CD
(CD: Included full manual
CD cover: OCR license
serial number)
Quick Start Guide /
Installation Guide
I_Introduction
- 4 -
2. A quick look at the hardware
1)
Front
<Direction of the Book complying with the initial setting>
POWER: Power on & off
AUTO: Capture the both pages alternately and save the captured pages on your PC.
In the event of successive scanning of the book, use the software menu panel “Main menu panel”.
(Refer to III. “5. Creating an eBook”for more detail.)
LEFT: Display the left side, RIGHT:Displaytheright side
CAPTURE:Capturethedisplayedimageandsave thecaptured imageon yourPC.
<The button panel>
2)
Rear
After installing the “VisualTable” software, connect the USB cable of the VisualTable book scanner to
a USB port at the rear of your PC.
I_Introduction
- 5 -
The VisualTable scanner works on a USB 2.0 port only. Please make sure your computer
supports USB 2.0. If the VisualTable scanner is connected to a USB 3.0 port it may not work
properly.
3. Key features and functions
Key
Features
ʌ
-shape(Inverted V-shape)
scanning
glass
Allows to scan with no shadow, distortion or damage
to the book binding.
Real-time processing
Real-timecorrectingenablestoimprovethescanned
image quality.
OCR (Optical Character
Reader)
Allows easy document conversion and Web search.
eBook creation
Makes it fast and easy to create an eBook.
Real-time annotation
Enables you to write or draw directly over the image.
Hardware-Software interaction
Controls the hardware from the software.
Main
Function
Real-time display
Capture image view
Image save a single side or left & light sides separately
eBook creation
Real-time Web search
Real-time annotation and creation of digital teaching materials
Easy access to Cloud services
Theinformation andspecifications hereinaresubjecttochange without priornotice.
Softwareupdate: Click “http://blog.naver.com/smartbookscanner”
II_Installation
- 6 -
II_Installation
1.
The installation process
InserttheVisualTableset-upCD,installandgetverifiednecessaryprogramsinorderfollowingtothe
instructionsinthisUserGuide
The VisualTable is UVC (Universal Video Class) compatible which installs its driver automatically
whenconnectingVisualTabletoyourPC’s USBport. Thereisnoneedto installanyadditional
drivers.
Note: The software MagicZoom eBook and TTS are not provided.
The OCR engine software is separate software from the VisualTable software.
Youcan purchase as many user licenses as necessary without purchasing any
additionalhardwareoftheVisualTable.
- 1 unit of OCR user license key: Included in the installation CD
- Purchasing additional OCR user license key:
Click “http://blog.naver.com/smartbookscanner”
1. Install the “VisualTable” program
2. Install the OCR engine & Get the OCR license verified.
3. Run the “VisualTable” program & Setup its settings
II_Installation
- 7 -
2.
Installing the software
Insert the VisualTable Set-up CD to your computer CD-ROM.
1)
Steps to installing VisualTable
①
Choose“VisualTable.” ② Click“Next.”
③ Click“I Agree.” ④
Click“Install.”
⑤ Click “Finish” to complete the installation.
If yourcomputer does notmeet the system specifications that VisualTable requires, there may
be difficulties using VisualTable. Since OCR license can be registered only one time, you
should check whether the projected image appears before registering the OCR license
(Checking the projected image: Refer to III. 1. “1) Connect VisualTable and run VisualTable
program”.and “2) Custom Setting: Camera options”). In the event of your negligence of the
above instruction, supplier has no responsibility for the related OCR issue.
II_Installation
- 8 -
2)
Installing & VerifyingOCR (Optical Character Reader)
Since OCR license can be registered only one time, you should check whether the projected
image appears before registering the OCR license (Checking the projected image: Refer to III. 1.
“1) Connect VisualTable and run VisualTable program”.and “2) Custom Setting: Camera options”).
In the event of your negligence of the above instruction, supplier has no responsibility for the
related OCR issue.
Make sure that the Internet is connected before starting the installation. If the Internet is not
connected, you will be unable to register the license.
①
Choose “OCR Engine Setup.” ② Click“Next.”
③ Click“I Agree.” ④
Theinstallationstarts.
⑤Click “Next” toinstall Microsoft Visual C++. ⑥ Check "I have read and accept the
license terms." and click "Install."
II_Installation
- 9 -
⑦Click "Finish" tocomplete the Microsoft
Visual C++ installation.
⑨Check"Iaccept the terms inthislicense
agreement."andclick"Next."
⑧ Click "Next" to install Sentinel License
Manager.
⑩ Click "Next."
⑪Click "Next." ⑫ Click“Next.”
II_Installation
- 10 -
⑬Click “Next.” ⑭
Click“Install.”
⑮ Please wait while the installation
continues.
Click "Finish" to complete the OCR
Certification Program.
Click "Finish" to complete the Sentinel
License Manager installation.
Enter the OCR serial number on the
case cover of Set-up CD. Click "Register"
and wait a few seconds until the
registration is complete.
Iftheserialnumberhasalreadybeenregistered
on the computer, click "Check," then the
registered serial number will appear.
29E95A0F-3D7970A8-2E9A0E6A-20563A94
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Renkforce Scanner Handbücher
Renkforce
Renkforce SC-12 Bedienungsanleitung
Renkforce
Renkforce DS100-5M Bedienungsanleitung
Renkforce
Renkforce RF-HDFS-01 Bedienungsanleitung
Renkforce
Renkforce WSF01 Bedienungsanleitung
Renkforce
Renkforce 2300623 Bedienungsanleitung
Renkforce
Renkforce Smart Scanner ET16 Plus Bedienungsanleitung
Renkforce
Renkforce DS100-8M Bedienungsanleitung
Renkforce
Renkforce 1576988 Betriebsanleitung
Renkforce
Renkforce Smart Scanner RF-ET17 Plus Bedienungsanleitung
