ResMed Positive Airway Pressure Device S8 Bedienungsanleitung

S8 Lightweight™ II

POSITIVE AIRWAY PRESSURE DEVICE

User Guide

English

ResMed Ltd (Manufacturer) 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia • ResMed Corp (US

Designated Agent) 14040 Danielson Street Poway CA 92064-6857 USA • ResMed (UK) Ltd (EU Authorized

Representative) 96 Milton Park Abingdon Oxfordshire OX14 4RY UK • ResMed Offices Australia, Austria, Belgium,

Brazil, China, Finland, France, Germany, Greece, Hong Kong, India, Ireland, Italy, Japan, Malaysia, Mexico, Netherlands,

New Zealand, Norway, Portugal, Singapore, South Africa, Spain, Sweden, Switzerland, UK, USA (see www.resmed.com

for contact details).

Protected by patents: US 5199424, US 5522382, US 6705315. Other patents pending.

Protected by design registrations: AU 302180, AU 302181, AU 302182, AU 302183, AU 302184, AU 302185, AU 302186,

CN 200430121212.2, CN 200430121213.7, CN 200430121211.8, CN 200430121214.1, CN 200430121215.6, CN

200430121216.0, CN 200430121217.5, EP 269436, HK 0412901.9, JP 1257662, JP 1257663, JP 1266956, JP 1266957, JP

1267270, JP 1267271, NZ 405614, NZ 406923, NZ 406924, NZ 406925, NZ 406926, NZ 406927, NZ 406928, US

D544598, US D553228, US D557406, US D557407, US D560795, US D561891, US D565160. Others pending.

S8, S8 Lightweight, ResScan, ResControl, ResLink and ResTraxx are trademarks of ResMed Ltd and Lightweight and

HumidAire are registered in U.S. Patent and Trademark Office.

iContents

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Contraindications 1

Adverse Effects 1

The S8 Lightweight II System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Masks 2

Humidifiers 2

ResScan Data Card 2

Using the S8 Lightweight II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Set Up the S8 Lightweight II 3

Start Treatment 4

Stop Treatment 4

How to Use the Control Panel 4

How to Change the Settings on your S8 Lightweight II 6

Using the Data Card to Collect data . . . . . . . . . . . . . . . . . . . . . . . . . 8

Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Daily 9

Weekly 9

Monthly 9

Replacing the Air Filter 9

Servicing 10

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

General Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1Introduction

Introduction

The S8 Lightweight II continuous positive airway pressure (CPAP) system is

indicated for the treatment of obstructive sleep apnoea (OSA) in patients > 30 kg.

The S8 Lightweight II CPAP system is intended for home and hospital use.

Contraindications

The S8 Lightweight II is not a life support device and may stop operating during

power failure or certain fault conditions. It should not be used by patients who

are dependent on continuous therapy.

Positive airway pressure therapy may be contraindicated in some patients with

the following pre-existing conditions:

•severe bullous lung disease

•pneumothorax

•pathologically low blood pressure

•dehydration

•cerebrospinal fluid leak, recent cranial surgery, or trauma.

Adverse Effects

Patients should report unusual chest pain, severe headache, or increased

breathlessness to their prescribing physician. An acute upper respiratory tract

infection may require temporary discontinuation of treatment.

The following side effects may arise during the course of therapy with the CPAP

device:

•drying of the nose, mouth, or throat

•nosebleed

•bloating

•ear or sinus discomfort

•eye irritation

•skin rashes.

The S8 Lightweight II System

Your S8 Lightweight II comprises:

•S8 Lightweight II positive airway pressure device

•2 m air tubing

•Power cord

•Carry bag.

Optional components include:

•ResScan™ Data Card

•3 m air tubing

•DC-12 converter.

Masks

For information on using masks, see your mask manual. Recommended masks

are available on www.resmed.com on the Products page under Service &

Support.

WARNING

Only ResMed mask systems are compatible for use with the S8 Lightweight

II. Please refer to “Adverse Effects” on page 1.

Humidifiers

A list of humidifiers compatible with ResMed devices can be found on

www.resmed.com, on the Products page under Service & Support.

ResScan Data Card

The ResScan Data Card may be used with the S8 Lightweight II either to help

your clinician to monitor your treatment or to provide you with updates to your

device settings.

Carry handle

Screen

Keypad

Air outlet

Data

Card slot

Air inlet

3Using the S8 Lightweight II

Using the S8 Lightweight II

WARNING

•Make sure the power cord and plug are in good condition and the

equipment is not damaged.

•Only ResMed air tubing should be used with the device. A different type

of air tubing may alter the pressure you actually receive, reducing the

effectiveness of your treatment.

•Blocking the hose and/or air inlet of the device while in operation could

lead to overheating of the device.

CAUTION

•Be careful not to place the device where it can be bumped or where

someone is likely to trip over the power cord.

•If you put the device on the floor, make sure the area is free from dust

and clear of bedding, clothes or other objects that could block the air

inlet.

•Make sure the area around the device is dry and clean.

Set Up the S8 Lightweight II

1Connect the power cord to the socket at the rear of the S8 Lightweight II.

2Plug the other end of the power cord into the power outlet.

3Connect one end of the air tubing firmly onto the air outlet.

4Connect the assembled mask system to the free end of air tubing.

For information on assembling your mask, see your mask manual.

Start Treatment

1Make sure the power is on.

The product name is displayed briefly on the LCD screen, then the standby

(Ramp) screen appears. The key and LCD backlights also turn on.

2Lie down and arrange the air tubing so that it is free to move if you turn in your

sleep.

CAUTION

Do not leave long lengths of air tubing around the top of your bed. They

could twist around your head or neck while you are sleeping.

3Alter the ramp time if required (see “How to change the ramp time” on page 6).

4To start treatment, press .

5Fit your mask as described in the mask user instructions.

WARNING

A mask should not be used unless the S8 Lightweight II device is turned on

and operating properly.

When ramping begins the LCD will display the word “RAMPING“, with the

current pressure indicated as dashes. Each dash is approximately equivalent to

2 cm H2O. For example, 6 dashes represents approximately 12 cm H2O

pressure.

Stop Treatment

To stop treatment at any time, remove your mask and press .

How to Use the Control Panel

The control panel of the S8 Lightweight II includes an LCD screen which displays

the menus and treatment screens as well as a keypad for navigating through the

menus and delivering treatment.

LCD screen

Start/Stop key

Keypad

5Using the S8 Lightweight II

The S8 Lightweight II keypad has the following keys:

The keypad and LCD are equipped with backlights that come on when the device

is powered. The LCD backlight turns off after two minutes of inactivity, and

comes back on when you press a key. The keypad backlight is always on while

the S8 Lightweight II is on.

Key Function

Start/Stop Starts or stops treatment.

Up Allows you to increase settings options and scroll through the

S8 Lightweight II menu.

Down Allows you to decrease settings options and scroll through

the S8 Lightweight II menu.

Left Performs the function indicated by the guiding text displayed

above it on the LCD screen. Guiding text includes menu,

change, and apply.

Right Performs the function indicated by the guiding text displayed

above it on the LCD screen. Guiding text includes exit and

cancel.

How to Change the Settings on your S8 Lightweight II

You can change settings (such as Ramp Time) on the S8 Lightweight II by using

the keypad and LCD. When the S8 Lightweight II is in standby mode you can

display a series of screens (a menu) on the LCD screen in order to view and

change the settings for a particular function.

Use the menu screens to change the ramp time and language. You can also view

details about the usage and software version of your S8 Lightweight II.

How to change the ramp time

During ramp time, the pressure increases from a low pressure to the prescribed

treatment pressure. You can set the ramp time in 5-minute intervals, from 0

minutes (OFF) up to a maximum ramp time set by your clinician. The standby

screen displays the current ramp time in the right corner.

1. Press or until the desired ramp time appears.

2. Once a ramp time is selected, begin therapy by pressing .

When ramping begins the LCD will display the word "RAMPING", with the

current pressure indicated as dashes. Each dash is approximately equivalent

to 2 cm H2O. For example, six dashes represents approximately 12 cm H2O

pressure.

How to change the EPR level

EPR can be used to help ease any discomfort you may experience when

breathing out during treatment. If your clinician has allowed access you can

change the EPR level. There are four settings: OFF; 1 (lowest EPR); 2; and 3

(highest EPR).

S8 ESCAPE II

S8 CLASSICRAMP 10min

S8 CLASSIC

PATIENT MENU

USED HRS: 960

Exit

USAGE: 120/180

Exit

SW: SX123456789

Exit

LANG: ENGLISH

Change Exit

EPR LEVEL: 1

Change Exit

Only displayed if

clinician enabled

7Using the S8 Lightweight II

1. On the standby (RAMP) screen, press .

2. Press until you see EPR LEVEL, then press (Change).

3. Press or until you see the setting that you require.

4. Press (Apply) to save the setting.

How to change the language setting

1. On the standby (Ramp) screen, press (Menu).

2. Press until you see LANG (Language), then press (Change).

3. Press or until you see the language that you require.

4. Press (Apply) to save the new language.

Messages on the S8 Lightweight II LCD

Your clinician may have set your S8 Lightweight II to remind you about important

events, such as when to replace your mask, when to insert your Data Card (if

your device is Data Card enabled) and so on.

The reminder message is displayed on the LCD and is visible if the device is not

delivering therapy. The backlight on the LCD flashes when a message is

displayed.

Your clinician can set any of the following reminders on your LCD:

Message Description Action

INSERT

CARD

May appear if your

device is Data Card

enabled.

Insert your Data Card and follow any

instructions that your clinician has given you.

When you have done this, the message will

disappear from the LCD. Pressing (Ok)

will also remove the message.

REPLACE

MASK

May appear when

your mask is due for

replacement.

Press (Ok) to remove the message from

your LCD, and replace your mask with a new

one.

CALL

PROVIDER

May appear as a

reminder to contact

your clinician, eg, to

discuss how your

therapy is going.

Press (Ok) to remove the message from

your LCD, and contact your clinician.

REPLACE

FILTER

May appear as a

reminder to replace

the air filter on your

device.

Press (Ok) to remove the message from

your LCD, and replace the air filter.

SERVICE

DUE

May appear as a

reminder to return

your device for

service.

Press (Ok) to remove the message from

your LCD, and contact your clinician.

Using the Data Card to Collect data

If your clinician needs to review your treatment, they will ask you to use the Data

Card to copy data from your S8 Lightweight II, and to return the card to them. The

Data Card will be provided in a protective folder.

Data that is copied to a Data Card is still stored and available on the S8 Lightweight II.

Copy data onto the Data Card

1. Switch on the S8 Lightweight II and wait until you see the standby (Ramp)

screen.

2. Hold the Data Card with the arrow facing up and insert it into the Data Card slot

until it stops. Data copying starts automatically.

The “Card Inserted Please Wait” message is displayed on the S8 Lightweight II

LCD while data is being copied. Copying takes approximately five seconds.

The “Copy Complete Remove Card” message is displayed on the LCD when

copying has finished.

3. Remove the Data Card by gripping the end of the Data Card and pulling it out.

4. Store the Data Card in its protective folder when not in use.

5. Return the card in its protective folder to your clinician using a postal envelope.

Using the Data Card to Update Settings

If your clinician has provided a Data Card with new device settings:

1. With the device in standby (Ramp) mode, insert the Data Card into the slot on

the Data Card module. Updating will start automatically.

The “Card Inserted Please Wait” message is displayed on the LCD while

updating is in progress. Updating takes approximately five seconds.

The “Settings Success Remove Card” message is displayed on the LCD if the

settings were updated successfully.

Note: This message only appears once. If you re-insert the Data Card after you

have updated your settings, this message is not displayed.

2. Remove the Data Card from the S8 Lightweight II.

3. Store the Data Card in its protective folder when not in use.

WARNING

If your clinician has told you to use this Data Card to update the settings on your

device and the “Settings Success” message does not appear, contact your

clinician immediately.

Cleaning and Maintenance

WARNING

Beware of electric shock. Do not immerse the unit or power cord in water.

Always unplug the unit before cleaning and be sure it is dry before plugging

back in.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ResMed Atemwegsprodukt Handbücher

ResMed

ResMed Mirage Liberty Bedienungsanleitung

ResMed

ResMed AirTouch N20 Montageanleitung

ResMed

ResMed AirCurve 10 CS PaceWave Bedienungsanleitung

ResMed

ResMed Mirage Micro Bedienungsanleitung

ResMed

ResMed Lumis HFT Bedienungsanleitung

ResMed

ResMed S8 AutoSet Spirit Bedienungsanleitung

ResMed

ResMed ApneaLink Bedienungsanleitung

ResMed

ResMed Nasal Pillows System Swift LT Bedienungsanleitung

ResMed

ResMed Disposable Masks and Circuits Bedienungsanleitung

ResMed

ResMed VPAP Auto Bedienungsanleitung

ResMed

ResMed Nasal Mask Mirage Micro Bedienungsanleitung

ResMed

ResMed AirFit F30 Bedienungsanleitung

ResMed

ResMed Positive Airway Pressure Device VPAP IV Bedienungsanleitung

ResMed

ResMed AirFit N20 Bedienungsanleitung

ResMed

ResMed AirFit P10 Bedienungsanleitung

ResMed

ResMed Mirage Quattro Bedienerhandbuch

ResMed

ResMed Ultra Mirage Bedienungsanleitung

ResMed

ResMed AcuCare F1-0 Bedienungsanleitung

ResMed

ResMed AirFit N20 Bedienungsanleitung

ResMed

ResMed Positive AirwAy Pressure Device S8 Elite II Bedienungsanleitung

ResMed

ResMed Positive AirwAy Pressure Device S8 Auto 25 Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed Mirage NV Full Face Mask Series 2 Bedienungsanleitung

ResMed

ResMed AirFit F20 NV Bedienungsanleitung

Beliebte Atemwegsprodukt Handbücher anderer Marken

Omron

Omron COMP A-I-R NE-C801 Bedienungsanleitung

CERES

CERES nosko nebulizer kit Bedienungsanleitung

Dr.Frei

Dr.Frei NE-SM1 Bedienungsanleitung

North

North 5400 series Bedienungsanleitung

John Bunn

John Bunn Neb-u-Lite LX2 Bedienungsanleitung

DeVilbiss

DeVilbiss UltraNeb Bedienungsanleitung

Sperian

Sperian Panther Hip-Pac P9684 Series Bedienungsanleitung

Dräger

Dräger X-plore 6570 Bedienungsanleitung

3M 8000 Series Bedienungsanleitung

Respironics

Respironics SideStream HS860 Bedienungsanleitung

Sundstrom

Sundstrom SR 500 Bedienungsanleitung

JARDIBRIC

JARDIBRIC KPBRU20 Bedienungsanleitung

Ombra

Ombra 63506 Bedienungsanleitung

Lotus

Lotus M-9520A Bedienungsanleitung

Philips

Philips Respironics EE Leak 1 AF541 Bedienungsanleitung

EVOLU

EVOLU Nano AiR MINI Bedienungsanleitung

Ambu

Ambu SPUR II Bedienungsanleitung

MSA AUER

MSA AUER 3S-PF Bedienungsanleitung