ReSound LINX 3D 61 Bedienungsanleitung

Quick guide

ReSound LiNX 3D™ 61

Product: ReSound LiNX 3D

Model: 61

Serial number (R):

_______________________________

Serial number (L):

_______________________________

Battery size: 312

My hearing aid information

PROGRAM WHEN TO USE BEEPS

Programs:

(if set up by your hearing care professional)

A. Program button

B. Microphones

C. Receiver

D. Wax guard

View ReSound’s hearing aid tutorial videos at youtube.com/resoundus.

Get to know your hearing aid

E. Dome

F. Battery door

G. Right/Left indicator

How to apply domes

It is recommended that your hearing care

professional change domes, as incorrect

dome replacement could result in injury.

ReSound standard domes

1. Push the new dome over the receiver.

2. Make sure that the new dome is

properly and securely mounted.

ReSound tulip domes

Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip

domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure

this:

1. Push the largest petal away from

the receiver tube using a ﬁnger. This

bends the petal forward.

2. Then push the largest “petal” back,

and it will be placed on top of the

smaller petal.

400344011-US-15.04-Rev.B.indd 30 20-05-2015 11:48:59

How to apply domes

It is recommended that your hearing care

professional change domes, as incorrect

dome replacement could result in injury.

ReSound standard domes

1. Push the new dome over the receiver.

2. Make sure that the new dome is

properly and securely mounted.

ReSound tulip domes

Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip

domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure

this:

1. Push the largest petal away from

the receiver tube using a ﬁnger. This

bends the petal forward.

2. Then push the largest “petal” back,

and it will be placed on top of the

smaller petal.

400344011-US-15.04-Rev.B.indd 30 20-05-2015 11:48:59

400701011 Rev A 2016.12

Regular care & maintenance

As needed: Change dome (E)

ReSound standard domes

1. Push the new dome over the

receiver.

2. Make sure that the new dome is

properly and securely maintained.

ReSound tulip domes

Tulip domes consist of two “petals”. It

is important that the largest petal is

the outermost petal. To ensure this:

1. Push the largest petal away from

the receiver tube using a ﬁnger.

This bends the petal forward.

2. Then push the largest “petal”

back, and it will be placed on top

of the smaller petal.

Monthly: Change the wax guard or

see your hearing care professional.

For changing CeruSTOP™(white)

wax guards, complete the following

steps:

Removal: Insert the removal side

of the wax guard tool into the used

wax guard so that the shaft of the

tool is touching the rim of the

wax guard. Slowly pull the wax

guard straight out.

Insertion: To insert the new wax

guard, gently press the replacement

side of the wax guard tool straight

into the hole of the sound outlet

until the outer ring lies ﬂush with the

outside of the receiver. Pull the tool

straight out. The new wax guard will

remain in place.

removal side replacement side

Wax guard tool

Getting started: On/O function

ON: Insert battery & completely close

battery door (F). Program 1 will

be active.

OFF: Open the battery door (F). Use

ﬁngertip to pull it all the way.

OFF

What you need to know

Daily: Clean your hearing aid.

Keep your hearing aids dry. Clean

the hearing aids using a soft cloth

or tissue.

Weekly: Clean the receiver

tubes and domes (E).

Use a soft cloth to clean the

receiver tube and dome on the

outside. Do not use water when

you are cleaning the receiver tubes.

Regular care & maintenance

Flight mode:

Some airlines prohibit the use

of wireless hearing aids (RF

transmitters) onboard. If required

by your airline, enable ﬂight mode:

Disable wireless operation by

opening and closing the battery

compartment three times within

ten seconds (open-close, open-close,

open-close). Your instruments will

now be in ﬂight mode.

The hearing aids must function in

ﬂight mode for 10 seconds before

wireless operation can be re-enabled.

To re-enable wireless operation,

open and close the battery door one

time and wait thirty seconds before

opening the battery door again to

avoid accidentally entering ﬂight

mode again.

Inserting/Replacing the battery:

1. Open the battery door (F)

completely by

using your

ﬁngertip.

2. Remove protective sticker from

battery and wait 2 minutes before

inserting the

battery into the

hearing aid to

allow full activation of the battery.

3. Insert the new battery

with the positive side

(ﬂat side) in the

correct position,

as shown.

4. Gently close the battery door. If it

doesn’t close easily, check to see

if the battery is upside down.

Beep/tone indicators

View ReSound hearing aid tutorial videos at youtube.com/resoundus.

BEEP/TONE INDICATION ACTION REQUIRED

Ding, ding, ding, dong Low battery Change battery

Ding (5 or 10) Hearing aid is starting up After dings cease, hearing aid

is turned on

Ding-ding,

ding-ding, etc.

Hearing aid is in ﬂight mode Use in ﬂight mode if desired,

or open-close battery door

(F) to exit ﬂight mode

Ripple tone Hearing aid is in streaming

mode

Use with wireless

accessory or press multi-

function button to exit

streaming mode

Troubleshooting

SYMPTOM CAUSE POSSIBLE REMEDY

No sound Battery door (F) not closed

Dead battery

Battery door (F) will not close

Blocked earmold or tube

Blocked wax guard

Turn on by closing the battery door (F)

Replace battery

Insert battery properly

Clean earmold or tube

Replace wax guard (D) or consult your hearing care professional

Not loud enough Blocked earmold or dome (E)

Change in hearing, volume too low

Excessive ear wax

Clean earmold, replace dome (E), replace guard (D)

Consult your hearing care professional

Excessive

whistling/feedback

Incorrect earmold placement

Incorrect dome (E) placement

Excessive ear wax

If none of the above

Re-insert earmold carefully

Re-insert dome (E)

Clean guard/consult your hearing care professional

Consult your hearing care professional

Wireless does not work Device may be in ﬂight mode Open and close the battery compartment (F) once.

Wireless operation will reactivate ten seconds later.

If there are any other problems not mentioned in this guide, please contact ReSound or your hearing care professional.

ReSound Government Services

8001 E. Bloomington Freeway

Bloomington, MN 55420

1.800.392.9932

www.resound.com/veterans

Manufacturer according

to FDA:

ReSound North America

8001 E. Bloomington Freeway

Bloomington, MN 55420

1.888.735.4327

resound.com

Manufacturer according

to Health Canada:

ReSound Canada

303 Supertest Road

Toronto, Ontario M3J 2M4

1.888.737.6863

resound.com

For more information

Refer to the user guide included in

your hearing aid box.

Your hearing care professional can

be reached at:

View ReSound hearing aid tutorial

videos at youtube.com/resoundus.

400701011 Rev A 2017.02

Inhaltsverzeichnis

Andere ReSound Hörgerät Handbücher

ReSound

ReSound Sparx Lite SL90-V Bedienungsanleitung

ReSound

ReSound LiNX 2 88 Bedienungsanleitung

ReSound

ReSound Mini BTE AZ60-di Mini BTE AZ60-Vi Bedienungsanleitung

ReSound

ReSound LS961-DRW LS761-DRW Bedienungsanleitung

ReSound

ReSound FT862-DRW Bedienungsanleitung

ReSound

ReSound V 70 Bedienungsanleitung

ReSound

ReSound LiNX 3D 62 Bedienungsanleitung

ReSound

ReSound Standard Tube Bedienungsanleitung

ReSound

ReSound 10 CIC Bedienungsanleitung

ReSound

ReSound ENZO2 88 Bedienungsanleitung

ReSound

ReSound RIE Mini-BTE-AL560-DR Bedienungsanleitung

ReSound

ReSound V30 Bedienungsanleitung

ReSound

ReSound ENZO 3D Montageanleitung

ReSound

ReSound BTE Bedienungsanleitung

ReSound

ReSound VE50 Bedienungsanleitung

ReSound

ReSound X-plore BTE XE81-DVI Bedienungsanleitung

ReSound

ReSound dot DT3060 Open Bedienungsanleitung

ReSound

ReSound LiNX Quattro 88 Bedienungsanleitung

ReSound

ReSound LINX 3D Montageanleitung

ReSound

ReSound Ziga BTE ZG80-VI Bedienungsanleitung

ReSound

ReSound ONE 9 Bedienungsanleitung

ReSound

ReSound ONE Programmierhandbuch

ReSound

ReSound Azure Silhouette BTE AZ71-DVI Bedienungsanleitung

ReSound

ReSound LiNX2 IIC Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Widex

Widex SUPER 220 S2-VSD Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung