RH LEVI Programmierhandbuch

LEVI TASK FLOOR LAMP COLLECTION

ASSEMBLY & INSTALLATION INSTRUCTIONS

UNITED STATES ENGLISH

LEVI TASK FLOOR LAMP COLLECTION UNITED STATES ENGLISH

RH.COM

REVISION 06-10-22

LEVI TASK FLOOR LAMP

PARTS INCLUDED

(A) Power Cord (1)

(B) Lamp Base (1)

(C) Exposed Threaded Pipe (1)

(D) Washer (1)

(E) Hex Nut (1)

(F) Lower Stem (1)

(G) Upper Stem (1)

(H) Lamp Body (1)

(I) Diffuser (1)

(J) Disc Finial (1)

(K) G9 LED Bulb (3)

(L) Rotary Dimmer Switch (1)

TOOLS NEEDED

(IF APPLICABLE)

(M) Open Wrench (1)

(A)

(C)

(D)

(B)

(E)

(F)

(G)

(H)

(I)

(J)

(K)

(M)

(L)

LEVI TASK FLOOR LAMP COLLECTION UNITED STATES ENGLISH

RH.COM

REVISION 06-10-22

IMPORTANT: PLEASE READ

PLEASE FOLLOW THE ASSEMBLY INSTRUCTIONS CLOSELY.

IMPROPER ASSEMBLY OR INSTALLATION CAN RESULT IN

PERSONAL OR PROPERTY DAMAGE.

IMPORTANT SAFETY FEATURES

BULBS

This ﬁxture has been rated for up to three (3) 6-watt maximum LED

lightbulbs. To avoid the risk of ﬁre, do not exceed the recommended

wattage.

DIMMER-SWITCH COMPATIBILITY

This ﬁxture is not dimmer-switch compatible.

WARNINGS

All wires are connected. When unpacking, be careful not to pull wires,

as damage may result. Do not connect electricity until the ﬁxture is

fully assembled. To reduce the risk of ﬁre, electrical shock, or personal

injury, always turn off ﬁxture and allow it to cool prior to replacing

the lightbulb. Do not touch or look directly at the bulb when ﬁxture is

illuminated. Keep ﬂammable materials away from lit bulb.

WARNING STRANGULATION HAZARD

Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.

Keep out of reach of children under 3 years of age.

THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.

ASSEMBLY AND INSTALLATION

1. Feed the power cord (A) through the hole in the lamp base (B) until

the exposed threaded pipe (C) is able to enter the lamp base (B). Feed

excess cord through the bushing in the side of the lamp base (B)

before proceeding.

2. Slide the washer (D) over the exposed threaded pipe. Screw on the

hex nut (E) and tighten with the included open wrench (M).

3. Insert the three G9 LED bulbs (K) into the sockets in the lamp body (H).

4. Align the diffuser (I) with the bottom of the lamp body (H) and attach

by screwing in the disc ﬁnial (J).

5. This ﬁxture allows height adjustment and rotation of the upper

stem (G) by loosening and tightening the clutch at the top of the

lower stem (F). It also allows rotation of the lamp body (H) where it

meets the upper stem (G).

6. Insert plug into wall outlet to power the ﬁxture. Rotary dimmer

switch (L) is located on the top surface of the lamp body (H). For best

dimming performance, turn the switch up to full brightness before

dimming down to the desired level.

CARE INSTRUCTIONS

Do not use polishes or cleaners on the ﬁxture. Wipe clean with a soft,

dry cloth.

Andere RH Außenleuchte Handbücher

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung