Richmar HydraTherm Bedienungsanleitung

INITIAL SET-UP

• Clip shelves onto dividers, then place dividers in tank

and arrange packs as desired. See illustrations below

for recommendation on how to maximize space for

use with 12 packs.

• Find drain hose in rear of device. Ensure the valve*

is closed (turned perpendicular to the hose) before

ﬁlling the device with water.

FILLING WITH WATER

• To ﬁll the device, ﬁrst pour in 3 cups of tap water, followed

by up to 12 gallons of distilled water, stopping when the

water level has reached 2” from the top of the tank.

NOTE: Exact amount of distilled water varies depending

on quantity of packs being used.

NOTE: Distilled water helps to maintain a clean device,

but doesn’t conduct electricity. For this reason tap water

is needed for the Low Water Sensor to operate properly.

POWERING ON THE DEVICE

• Ensure power switch on back of device is in the

OFF or O position.

• Connect the included power plug into the rear of the

device, and then into the nearest available outlet.

• If using a Deluxe HydraTherm™, ensure the Heat/Drain

switch on the rear of the device is toggled to HEAT.

• Toggle the power switch to the ON or I position.

When powered on, the power switch will illuminate, and

the digital display on the front of the device will display

the current water temperature.

Front Rack

3x Universal

Clip

2x Standard

1x Standard + 1x Cervical

2x Cervical

2x Oversize

1x Oversize

*Standard valve is green/blue. Deluxe valve is gray.

Thank you for purchasing the HydraTherm™. This Quick-Start Guide will help you to get started

quickly, but does not replace the Operating Manual. Be sure to read, understand, and practice

the operating instructions, warnings, and cautions included in the manual.

QUICK-START GUIDE

HydraTherm™

LOW WATER INDICATOR

• Check Temperature Display. If enough tap water

was added, the Low Water Indicator should NOT

be illuminated at this time. If Low Water Indicator is

illuminated, add more tap water until the indicator light

turns o.

TEMPERATURE SETTING

• Do not exceed 140° F (60° C) for best therapeutic eect,

patient comfort, and HydraHeat Pack longevity.

• It can take several hours for the water to reach the Set

Temperature. The default Set Temperature is 135°F (57°C),

to change the Set Temperature refer to instructions below.

To enter Temperature Set Mode:

• Press “SET” key on control panel,

“HSP” will then be displayed.

• Press “SET” key again and the and the current

Set Temperature will display. (e.g. 135°/57°C).

• Press UP or DOWN arrows until desired temperature is

reached. (e.g. 140°F/60°C).

• Once desired temperature is displayed, press and

release the “SET” button. The new Set Temperature is

now saved.

• To exit Temperature Set Mode, press the SET and

DOWN arrow together, or the device will exit

Temperature Set Mode automatically after

1 minute of inactivity.

WARNING: The scalding temperature of water is

140° F (49° C). Never place hands into the scalding water.

Use plastic-coated tongs to retrieve hot pack if necessary.

HYDRAHEAT PACKS

• HydraHeat Packs absorb heat, not water,

and provide therapeutic heat up to 45 minutes.

• Placing a towel or pillowcase between between

HydraHeat Pack and patient is recommended.

• Terry covers are not recommended when

using HydraHeat Packs.

Have questions? Contact Richmar:

Phone: 888.549.4945

Email: customerservice@richmarweb.com

HSP

135

140

Low Water Indicator illuminated Low Water Indicator not illuminated

135 135

Compass Health Brands Corp.

Toll Free 1.888.549.4945

6753 Engle Road

Middleburg Heights, OH 44130

richmarweb.com

Manufactured for

Andere Handbücher für HydraTherm

Andere Richmar Medizinische Geräte Handbücher

Richmar

Richmar REX Bedienungsanleitung

Richmar

Richmar US PRO 2000 2ND EDITION Bedienungsanleitung

Richmar

Richmar InTENSity 7 Bedienungsanleitung

Richmar

Richmar TheraTouch EX4 Bedienungsanleitung

Richmar

Richmar REX Bedienungsanleitung

Richmar

Richmar Tens 3000 Bedienungsanleitung

Richmar

Richmar SoundCare Plus Bedienungsanleitung

Richmar

Richmar TheraTouch CX2 Bedienungsanleitung

Richmar

Richmar US 1000 3RD EDITION Bedienungsanleitung

Richmar

Richmar HydraTherm Bedienungsanleitung

Richmar

Richmar HIVADOT Bedienungsanleitung

Richmar

Richmar Quattro 2.5 Bedienungsanleitung

Richmar

Richmar TheraTouch LX2 Bedienungsanleitung

Richmar

Richmar APT Performer Bedienungsanleitung

Richmar

Richmar ComboCare Bedienungsanleitung

Richmar

Richmar InTENSity 10 Bedienungsanleitung

Richmar

Richmar TheraSound EVO Bedienungsanleitung

Richmar

Richmar Winner EVO Series Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

FujiFilm

FujiFilm Sonart Betriebsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung