Ricoh Aficio SGC 1506 Bedienungsanleitung

B229

B229B229

B229

Table of Contents

Table of ContentsTable of Contents

Table of Contents

Control Panel......................................................................3

When the output looks like …............................................4

Cleaning Print-Heads.........................................................5

Flushing Print-Heads.........................................................

Adjusting Head Position.....................................................9

Changing Paper Size ........................................................11

When blinks ................................................................12

Unusable Paper ................................................................12

Control Panel

Control PanelControl Panel

Control Panel

Reference:

Reference:Reference:

Reference: See “Control Panel”, About This Machine.

1. Communication indicator

(facsimile mode)

2. Received File indicator (facsimile mode)

3. [Facsimile] key

4. [Search Destination] key

(scanner and facsimile mode)

5. [Check Destination] key

(scanner and facsimile mode)

6. Function keys

7. Display panel

. Selection key

9. Scroll key

10. Indicators

Add Ink indicator

Load Paper indicator

11. [User Tools/Counter] key

12. [Clear Modes] key

13. [Clear/Stop] key

14. Main power indicator

15. Operation switch

16. [Start] key

17. [#] key

1 . Number keys

19. [OK] key

20. [Escape] key

21. Alarm

22. [Sort] key (copier mode)

23. [Duplex/Combine/Series] key

(copier mode)

24. Data-in indicator (printer mode)

25. [Original] key (copier and scanner mode)

26. [Lighter] key, [Darker] key

(copier, scanner and facsimile mode)

27. [Full Color/B&W] key

2 . [ Online] key (printer mode)

29. Quick Dial keys

30. Quick Dial Flip Plate

31. [Job Information] key

(scanner and facsimile mode)

32. [On Hook Dial] key (facsimile mode)

33. [Pause/Redial] key (facsimile mode)

34. [Memory Trans] key (facsimile mode)

35. [Resolution] key (facsimile mode)

36. User Function keys (facsimile mode)

Note

NoteNote

Note

Depending on the machines or options, the functions you can use will be different. For

details about machine's functions, see “Options”, About This Machine.

When

When When

When the

thethe

the output

output output

output l

looks like …

ooks like …ooks like …

ooks like …

Reference:

Reference:Reference:

Reference: For details, see “Maintenance” in Other User Tools section, General Settings Guide.

Output paper with white lines or color drift

Output paper with white lines or color driftOutput paper with white lines or color drift

Output paper with white lines or color drift

When white lines appear on the paper or color drift occurs, perform the following:

Output Image of white lines and color drift

Output paper with blurry colors or

Output paper with blurry colors or Output paper with blurry colors or

Output paper with blurry colors or misaligned vertical

misaligned verticalmisaligned vertical

misaligned vertical lines

lines lines

lines

When the color of output image blurs or vertical lines are misaligned, perform/adjust the following:

Output Image of misaligned vertical lines

Note

NoteNote

Note

When misaligned verticals occur during using printer function, the condition may improve if you

select [Quality] in [Print priority according to selected paper]. In this case, however, the printer speed

is reduced.

Clean Print-heads

If the problem is

not solved:

Clean Print-heads

Head Position Adjust

If the problem is

not solved:

P.5

P.5 P.5

P.5 -

- 7

7 7

P.5

P.5 P.5

P.5 -

- 7

7 7

P.P.

P.9

P.9 P.9

P.9 -

- 10

10 10

Flush Print Heads

Clean

CleanClean

Cleaning

inging

ing Print

Print Print

Print-

-H

Heads

eadseads

eads

Reference:

Reference:Reference:

Reference: See “Nozzle Check Pattern”, Troubleshooting.

Printing

Printing Printing

Printing Nozzle Check Pattern

Nozzle Check PatternNozzle Check Pattern

Nozzle Check Pattern

This machine makes prints by spraying inks from nozzles of print-heads and the nozzles are

clogged on rare occasions.

When a specified color is not printed or patchy, the nozzle may be clogged. In this case, check the

nozzles by following steps. When the nozzles are clogged, clean the print-heads.

Before

BeforeBefore

Before the operation:

the operation: the operation:

the operation:

 Make sure the Envelope Lever, which is on the right side of the machine,

has been raised. Otherwise, you will be unable to print.

 Check that A4 or ½” × 11” size paper SEF is set in Tray 1. You

cannot print the test pattern if paper is not set correctly.

Important

ImportantImportant

Important

 During printing the test pattern, do not conduct any other operations.

1) Press the [User Tools/Counter] key.

2) Select [Maintenance] using [▲] or [▼], and then press the

[OK] key.

3) Select [Nozzle Check Pattern] using [▲] or [▼], and then

press the [OK] key.

4) Press the [Start] key.

Check the print results of the test pattern. Go on to the next page

and check the results.

Normal

Envelope

Envelope Lever

Cleaning Print-Heads (Continued).

Reference:

Reference:Reference:

Reference: See steps 5 and 6 in “Nozzle Check Pattern”, Troubleshooting.

Check

CheckCheck

Checking

inging

ing the Nozzle Check Pattern.

the Nozzle Check Pattern. the Nozzle Check Pattern.

the Nozzle Check Pattern.

1) Check the print results of the Nozzle Check Pattern.

In the test pattern, "K1", "C", "M", "Y", and "K2" correspond to

[Black 1], [Cyan], [Magenta], [Yellow], and [Black 2] of [Clean

Print-heads] and [Flush Print-heads] functions, respectively ([User

Tools/Counter] - [Maintenance]).

For example, if “K1” nozzle is not correct, select [Black 1] of

[Clean Print-heads] or [Flush Print-heads] and then clean/flush

the nozzles.

2) If the printing is blurred, unclear, or missing lines (see

above) press [Continue] to perform head cleaning.

If you do not need to perform head cleaning, press [End] to finish.

Normal print results If a nozzle is not firing

Cleaning Print-Heads (Continued).

Reference:

Reference:Reference:

Reference: See “Clean Printheads”, Troubleshooting.

Clean

CleanClean

Cleaning

inging

ing Print

Print Print

Print-

-H

Heads

eadseads

eads

Important

ImportantImportant

Important

 Cleaning print-heads consumes ink.

 Perform no other operations during head cleaning.

 Head cleaning is not possible if even one color has run out.

 Cleaning may be incomplete if ink in a cartridge gets too low or runs out during cleaning.

1) Select [Clean Print-heads] using [▲] or [▼], and then

press the [OK] key.

2) Select the color of which head you want to clean using [▲]

or [▼], and then press the [►] key. A check mark will

appear in the square next to the color you have selected.

Note: You can select more than one col

Note: You can select more than one colNote: You can select more than one col

Note: You can select more than one color at a time.

or at a time.or at a time.

or at a time.

3) Press the [OK] key.

4) Press [Yes].

Head cleaning begins.

5) Press [Exit] and check the results of head cleaning.

The display goes back to step 1 by pressing [Exit]. Select [Nozzle

Check Pattern] and check the print results.

* If you have repeated head cleaning three times and the problem is

not solved, check the following conditions and then perform

flushing or adjust the head position

 When the nozzle is clogged:

When the nozzle is clogged:When the nozzle is clogged:

When the nozzle is clogged:

Go to step 3 in “Flushing Print-Heads” on page and perform flushing.

 When the vertical line is misaligned:

When the vertical line is misaligned: When the vertical line is misaligned:

When the vertical line is misaligned:

Go to “Adjusting Head Position” on pages 9 and 10 and adjust head position.

6) Press the [User Tools/Counter] key and finish cleaning after checking the normal print results.

Flush

FlushFlush

Flushing

inging

ing Print

Print Print

Print-

-H

Heads

eadseads

eads

Reference:

eference:eference:

eference: See “Flush Printheads”, Troubleshooting.

Use this function if repeated head cleaning fails to reactivate a mis- or non-firing nozzle. This

function cleans the print-heads far more thoroughly. It consumes much more ink than head

cleaning.

Import

ImportImport

Important

antant

ant

 Flushing consumes ink. Perform flushing only when necessary.

 Perform no other operations during flushing.

 Flushing is not possible if even one color has run out.

 Flushing may be incomplete if ink in a cartridge gets too low or runs out during flushing.

1) Press the [User Tools/Counter] key.

2) Select [Maintenance] using [▲] or [▼], and then press the

[OK] key.

3) Select [Flush Print-heads] using [▲] or [▼], and then

press the [OK] key.

Start from this step when you perform flushing after pressing [Exit]

in step 5 on page 7.

4) Select the color of which head you want to clean using [▲]

or [▼], and then press the [►] key. A check mark will

appear in the square next to the color you have selected.

Note: You can select more than one color at a time.

Note: You can select more than one color at a time.Note: You can select more than one color at a time.

Note: You can select more than one color at a time.

5) Press the [OK] key.

6) Press [Yes].

Flushing begins.

7) Press [Exit] and check the results of head cleaning.

Press [Exit] and the display goes back to step 3. Select [Nozzle

Check Pattern] and check the print results.

) Check the normal print results and press the [User Tools/Counter] key to finish.

Adj

AdjAdj

Adjust

ustust

usting

ing ing

ing Head Position

Head PositionHead Position

Head Position

Reference:

Reference:Reference:

Reference: See “Head Position Adjust”, Troubleshooting.

Printing the test pattern for

Printing the test pattern for Printing the test pattern for

Printing the test pattern for Head Position Adjust

Head Position AdjustHead Position Adjust

Head Position Adjust.

This machine adopts an ink jet system. Since the characteristic of ink changes by environment

such as temperature and humidity, it may cause misaligned vertical lines or color drift. Head

Position Adjust may effect to such cases.

Before the operation

Before the operationBefore the operation

Before the operation

 Make sure the Envelope Lever, which is on the right side of the machine, has been raised. Otherwise,

you will be unable to print.

 Check that A4 or ½” × 11” size paper SEF is set in Tray 1. You cannot print the test pattern if

paper is not set.

Important

ImportantImportant

Important

 During printing the test pattern, do not conduct any other operations.

1) Press the [User Tools/Counter] key.

2) Select [Maintenance] using [▲] or [▼], and then press the

[OK] key.

3) Select [Adjustment] using [▲] or [▼], and then press the

[OK] key.

4) Select [Head Position Adjust] using [▲] or [▼], and then

press the [OK] key.

5) Select which head position you want to adjust using [▲] or

[▼], and then press the [OK] key.

The item you select differs depending on the write mode you want to

adjust. Select [2.Printer High Speed] if you have selected Plain and

Fast mode (300 dpi) for the printer. Otherwise, select [1.Standard].

6) Press the [Start] key.

The Head Position Adjust test pattern is printed. Go on to the next

page and check the print results of Head Position Adjust test

pattern.

Adjusting Head Position (Continued).

Reference:

Reference:Reference:

Reference: See steps 7 to 12 in “Head Position Adjust”, Troubleshooting.

Check the test pattern for

Check the test pattern for Check the test pattern for

Check the test pattern for Head Position Adjust

Head Position AdjustHead Position Adjust

Head Position Adjust

Check the optimal adjustment value based on the print results of the test pattern.

Check the optimal adjustment value based on the print results of the test pattern.Check the optimal adjustment value based on the print results of the test pattern.

Check the optimal adjustment value based on the print results of the test pattern.

The best adjust value is the one that matches the

following conditions:

* The square pattern that has faintest color closest

to gray.

* Vertical lines on both sides are closet to straight.

If the value in column “A” is “+2”, the adjustment

value of [A] is [+2]. Also check the appropriate value

for the “B” to “I” lines.

Adjust

Adjust Adjust

Adjust the

the the

the Head Position

Head Position Head Position

Head Position

1) Press [Adjust].

2) Select the item you want to adjust, and then press the

[OK] key.

3) Enter the adjustment value checked in the test pattern for

the Head Position adjust, and then press the [OK] key.

The display goes back to that of Step 2.

4) Press [End].

The display goes to step 4 in “Printing the test pattern for Head

Position Adjust” on the previous page.

The pattern,

which meets the

conditions

Check the appropriate

pattern for each line.

e.g. “+2” for “A”, “+1” for “B”,

“-3” for “D”, “+2” for E…

5) Print the test pattern and check the

adjustment results.

Adjustment is complete when the values are all “0”.

6) Press the [User Tools/Counter] key to finish.

Andere Handbücher für Aficio SGC 1506

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ricoh Multifunktionsdrucker Handbücher

Ricoh

Ricoh B064 SERIES Bedienungsanleitung

Ricoh

Ricoh Aficio MP C2050 Bedienungsanleitung

Ricoh

Ricoh 3045 - Aficio B/W Laser Bedienungsanleitung

Ricoh

Ricoh C222DN - Aficio SP Color Laser Printer Kurzanleitung

Ricoh

Ricoh B156 Bedienungsanleitung

Ricoh

Ricoh B222 Bedienungsanleitung

Ricoh

Ricoh Aficio MP C2030 Bedienungsanleitung

Ricoh

Ricoh DX 3443 Bedienungsanleitung

Ricoh

Ricoh Aficio 3131 Bedienungsanleitung

Ricoh

Ricoh B230 Bedienungsanleitung

Ricoh

Ricoh Aficio C2500 Bedienungsanleitung

Ricoh

Ricoh Aficio 200 Bedienungsanleitung

Ricoh

Ricoh fax3310l Betriebsanleitung

Ricoh

Ricoh Aficio MP C6000 Bedienungsanleitung

Ricoh

Ricoh 4035e Gebrauchsanweisung

Ricoh

Ricoh Aficio SP 3400SF Bedienungsanleitung

Ricoh

Ricoh 4016 Series Bedienungsanleitung

Ricoh

Ricoh Aficio AP4500 Bedienungsanleitung

Ricoh

Ricoh Aficio 400 Bedienungsanleitung

Ricoh

Ricoh Pro 906EX Bedienungsanleitung

Ricoh

Ricoh Aficio 220 Bedienungsanleitung

Ricoh

Ricoh B010 Bedienungsanleitung

Ricoh

Ricoh Aficio MP C3500 Bedienungsanleitung

Ricoh

Ricoh Aficio MP 5500 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung