Ricoh Priport JP5000 Bedienungsanleitung

SERVICE MANUAL

(Machine code: C229)

IMPORTANT SAFETY NOTICES

PREVENTION OF PHYSICAL INJURY

1. Before disassembling or assembling parts of the printer and peripherals, make

sure that the power cord is unplugged.

2. The wall outlet should be near the printer and easily accessible.

3. If any adjustment or operation check has to be made with exterior covers off or

open while the main switch is turned on, keep hands away from electrified or

mechanically driven components.

HEALTH SAFETY CONDITIONS

1. If you get ink in your eyes by accident, try to remove it with eye drops or flush

with water as first aid. If unsuccessful, get medical attention.

2. If you ingest ink by accident, induce vomiting by sticking a finger down your

throat or by giving soapy or strong salty water to drink.

OBSERVANCE OF ELECTRICAL SAFETY STANDARDS

1. The printer and its peripherals must be installed and maintained by a customer

service representative who has completed the training course on those models.

ICAUTION

The RAM has a lithium battery which can explode if handled incorrectly.

Replace only with the same type of RAM. Do not recharge or burn this

battery. Used RAM's must be handled in accordance with local regulations.

IATTENTION

La carte RAM comporte une pile au lithium qui présente un risque

d'explosion en cas de mauvaise manipulation. Remplacer la pile

uniquement par une carte RAM identique. Ne pas recharger ni brûler cette

pile. Les cartes RAM usagées doivent être éliminées conformément aux

réglementations locales.

SAFETY AND ECOLOGICAL NOTES FOR DISPOSAL

1. Dispose of replaced parts in accordance with local regulations.

2. Used ink and masters should be disposed of in an environmentally safe

manner and in accordance with local regulations.

3. When keeping used lithium batteries (from the main processing units) in order

to dispose of them later, do not store more than 100 batteries (from the main

processing units) per sealed box. Storing larger numbers or not sealing them

apart may lead to chemical reactions and heat build-up.

IMPORTANT SAFETY NOTICES

PREVENTION OF PHYSICAL INJURY

1. Before disassembling or assembling parts of the printer and peripherals, make

sure that the power cord is unplugged.

2. The wall outlet should be near the printer and easily accessible.

3. If any adjustment or operation check has to be made with exterior covers off or

open while the main switch is turned on, keep hands away from electrified or

mechanically driven components.

HEALTH SAFETY CONDITIONS

1. If you get ink in your eyes by accident, try to remove it with eye drops or flush

with water as first aid. If unsuccessful, get medical attention.

2. If you ingest ink by accident, induce vomiting by sticking a finger down your

throat or by giving soapy or strong salty water to drink.

OBSERVANCE OF ELECTRICAL SAFETY STANDARDS

1. The printer and its peripherals must be installed and maintained by a customer

service representative who has completed the training course on those models.

ICAUTION

The RAM has a lithium battery which can explode if handled incorrectly.

Replace only with the same type of RAM. Do not recharge or burn this

battery. Used RAM's must be handled in accordance with local regulations.

IATTENTION

La carte RAM comporte une pile au lithium qui présente un risque

d'explosion en cas de mauvaise manipulation. Remplacer la pile

uniquement par une carte RAM identique. Ne pas recharger ni brûler cette

pile. Les cartes RAM usagées doivent être éliminées conformément aux

réglementations locales.

SAFETY AND ECOLOGICAL NOTES FOR DISPOSAL

1. Dispose of replaced parts in accordance with local regulations.

2. Used ink and masters should be disposed of in an environmentally safe

manner and in accordance with local regulations.

3. When keeping used lithium batteries (from the main processing units) in order

to dispose of them later, do not store more than 100 batteries (from the main

processing units) per sealed box. Storing larger numbers or not sealing them

apart may lead to chemical reactions and heat build-up.

1 July, 1998 SPECIFICATIONS

1-1

Overall

Information

1. OVERALL INFORMATION

1.1 SPECIFICATIONS

Configuration: Desktop

Master Processing: Digital with 400 dpi thermal head

Scanning (Pixel Density): 400 dpi CCD

Printing Process: Fully automatic stencil system, with one drum and

pressure cylinder system

Original Type: Sheet/Book

In Platen Mode: Document size:

Maximum 304.8 x 432 mm [12.0" x 17.0"]

Thickness: Less than 30 mm

Weight: Less than 10 kg

In ADF Mode: Document size:

Maximum 297 x 864 mm [11.6" x 33.8"]

Minimum 105 x 128 mm [4.2" x 5.1"]

Document weight:

52.3 - 104.7 g/m2 [14 - 28 lb]

ADF capacity:

30 sheets (using 20 lb or 80 g/m2paper)

Reproduction Ratios: Inch versions Others

Full Size: 100% 100%

Reduction: 65% 71%

74% 82%

77% 87%

93% 93%

Enlargement: 121% 115%

129% 122%

155% 141%

Zoom: 50 - 200% (by 1%) in Platen mode

50 - 155% (by 1%) in ADF mode

Directional Magnification:

50 - 200% (by 1%)

Image Modes: Letter, Photo, Letter/Photo, Pencil, Tint

SPECIFICATIONS 1 July, 1998

1-2

Printing Area:

(At 20 °C/ 65 % RH) Metric size version models:

290 mm x 409 mm

Inch size version models:

290 mm x 419 mm [11.4" x 16.4"]

With optional A4 drum:

290 mm x 204 mm [11.4" x 8.0"]

Edge Margins: Leading edge:

10 mm (At the "0" position of Image Shift mode)

Trailing edge:

2 mm

Print Paper Size: Minimum: 70 mm x 148 mm [2.8" x 5.9"]

Maximum: 325 mm x 447 mm [12.7" x 17.6"]

Print Paper Weight: 47.1 g/m2to 209.3 g/m2[12.5 lb to 55.6 lb]

Printing Speed: 60, 75, 90, 105, 120 sheets/minute (5 steps)

Master Process Time: Platen mode:

Less than 15.5 seconds (A3 paper)

Less than 12 seconds (A4 paper)

ADF mode:

Less than 19.5 seconds (A3 paper)

Less than 16 seconds (A4 paper)

Master Eject Box Capacity: 60 masters / A3 size (Normal conditions)

Side Registration Adjustable

Range: ±10 mm

Vertical Registration Adjustable

Range: Inch size version models:

±10 mm

Metric size version models:

±15 mm

Paper Feed Table Capacity: 1000 sheets (80 g/m2/ 20 lb)

Paper Delivery Table Capacity: 1000 sheets (80 g/m2/ 20 lb)

Power Source: 110/120 V, 50/60 Hz: 2.7 A

220 - 240 V, 50/60 Hz: 1.5 A

Maximum Power Consumption: 110/120 V version: 285 W

220 - 240 V version: 280 W

1 July, 1998 SPECIFICATIONS

1-3

Overall

Information

Noise Emission:

(At operation position) At 60 rpm printing speed: 57 dB

At 90 rpm printing speed: 60 dB

At 120 rpm printing speed: 64 dB

Weight: 94 kg [207 lb]

101 kg [222.7 lb] with ADF

Dimensions:

(Width x Depth x Height) Trays closed: 625 mm x 650 mm x 574 mm

With ADF:

625 mm x 650 mm x 684 mm

Trays open: 1405 mm x 650 mm x 574 mm

With ADF:

1405 mm x 650 mm x 684 mm

Master Type: Thermal master roll type:

420 mm width, 110 m / roll

Yield:

200 masters/roll (at A3 size)

Max run length per master:

2,000 prints

Master Storage Conditions: Temperature:

-10 °C to 40 °C

Humidity:

10% to 95% RH

Recommended maximum storage period:

One year after production date

* Avoid locations exposed to direct sunlight.

Ink Type 1000 ml cartridge type

Available colors:

Black, Red, Blue, Green, Brown

Ink Storage Conditions: Temperature:

-5 °C to 40 °C

(Optimum conditions: 15 °C to 25 °C)

Humidity:

10% to 95% RH

(Optimum conditions: 20% to 70% RH)

Recommended maximum storage period:

One year after production date

* Avoid locations exposed to direct sunlight.

SPECIFICATIONS 1 July, 1998

1-4

Available Options •A3 Drum

•A4 Drum

•Document Feeder

•Key Counter

•Memory Board (Editing Function)

•PC Controller

•Interface Board (Standard for the U.S.A and

European versions)

1 July, 1998 GUIDE TO COMPONENTS AND THEIR FUNCTION

1-5

Overall

Information

1.2 GUIDE TO COMPONENTS AND THEIR FUNCTION

1.2.1 MACHINE EXTERIOR

1. Front Door Open for access to the inside of the

machine.

2. Flip-up Cover Open to access the Image Density key and

so on.

3. Operation Panel Operator controls and indicators are

located here.

4. Master Feed Unit Open the master feed unit when installing

the master.

5. Paper Feed Tray Down key Press to lower the paper feed tray.

6. Paper Feed Side/End

Plates Use to prevent paper skew.

7. Paper Feed Tray Set paper on this tray for printing.

8. Paper Feed Side/End Plate

Knob Use to move the side/end plates.

C229V500.WMF

Andere Handbücher für Priport JP5000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ricoh Multifunktionsdrucker Handbücher

Ricoh

Ricoh PRSPC342DN1 Bedienungsanleitung

Ricoh

Ricoh Aficio SP 3400SF Bedienungsanleitung

Ricoh

Ricoh Aficio MP 5001 Bedienungsanleitung

Ricoh

Ricoh Aficio 6110 Bedienungsanleitung

Ricoh

Ricoh Aficio MP 2353 Bedienungsanleitung

Ricoh

Ricoh Pro C5300 Series Bedienungsanleitung

Ricoh

Ricoh Priport DX 3343 Bedienungsanleitung

Ricoh

Ricoh Aficio 3515MF Bedienungsanleitung

Ricoh

Ricoh Aficio Color 5560V Bedienungsanleitung

Ricoh

Ricoh AFICIO MP C305SP Kurzanleitung

Ricoh

Ricoh SP 311DN Bedienungsanleitung

Ricoh

Ricoh B064 SERIES Bedienungsanleitung

Ricoh

Ricoh PRO C9100 Merkblatt

Ricoh

Ricoh C226 Bedienungsanleitung

Ricoh

Ricoh Priport JP5000 Bedienungsanleitung

Ricoh

Ricoh Aficio MP C4000 Bedienungsanleitung

Ricoh

Ricoh Aficio MP C7500 Bedienungsanleitung

Ricoh

Ricoh M052 Bedienungsanleitung

Ricoh

Ricoh A250/B001 Bedienungsanleitung

Ricoh

Ricoh SP 200S Bedienungsanleitung

Ricoh

Ricoh RMY-P1 Kurzanleitung

Ricoh

Ricoh MP C3003 Bedienungsanleitung

Ricoh

Ricoh Aficio MP 161F Bedienungsanleitung

Ricoh

Ricoh Aficio MP C6000 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung