Ricoh Pro C900 Stücklistenhandbuch

Adjustment Item Menu Guide: TCRU

Model Name:

Pro C900S/Pro C900

Read this manual carefully before using this machine and keep it handy for future reference.

Replacement Guide: TCRU

Model Name:

Pro C900S/Pro C900

CONVENTIONS USED IN THIS MANUAL

CAUTIONS, NOTES, ETC.

The following headings provide important information that you must read:

RWARNING

Failure to follow the information could result in serious injury or death.

RCAUTION

Follow the information to ensure safe operation and avoid minor injuries.

Important:

•Follow this information to avoid misfeeds and loss of data, and to prevent

damage to the machine and originals.

•The manufacturer shall not be responsible for any damage or expense that might

result from use of other than genuine parts with this machine.

•Some illustrations in this manual might be slightly different from the machine.

Certain options might not be available in some countries. For details, please

contact your local dealer.

Note: This information provides extra information about machine maintenance.

Trademark:

•Acrobat® is a registered trademark of Adobe Systems Incorporated.

•EFI, Fiery and Fiery Driven are registered trademarks of Electronics for Imaging,

Inc. in the U.S. Patent and Trademark Office and/or certain other foreign

jurisdictions.

GENERAL SAFETY INSTRUCTIONS

Switches and Symbols

Where symbols are used on or near switches on machines for Europe and other

areas, the meaning of each symbol conforms with IEC60417.

STANDBY

Power Plug and Power Cord

Always make sure that the power plug is fully completely into the wall outlet. A

partially inserted plug could lead to heat generation (due to a power surge

caused by high resistance) that can result in fire and other problems.

Always check the power plug and make sure that it is free of dust and lint.

Clean it if necessary. A dirty plug can generate heat that can result in fire.

Inspect the length of the power cord for cuts or other damage. A frayed or

otherwise damaged power cord can cause a short circuit which could lead to a

fire or injury from electrical shock. If the power cord is damaged in any way, call

for service.

Check the length of the power cord between the machine and power supply.

Make sure the power cord is not coiled or wrapped around any object such as a

table leg. Coiling the power cord can cause excessive heat to build up and this

could result in fire.

Make sure that the area around the wall outlet is free of obstacles so the power

cord can be removed quickly in case of an emergency.

Make sure that the power cord is grounded (earthed) at the wall outlet using the

ground wire on the plug.

Insert the power cord into the wall outlet directly. Never use an extension cord.

When disconnecting the power plug from the wall outlet, always pull on the plug,

not the cable.

RWARNING

•Protect the machine from dampness or wet weather, such as rain and snow.

•Unplug the power cord from the wall outlet before moving the machine. While moving

the machine, take care that the power cord is not damaged under the machine.

•When disconnecting the power plug from the wall outlet, always pull the plug (not the

cable).

•Do not allow paper clips, staples, or other small metallic objects to fall inside the

machine.

•Keep toner (used or unused) and toner containers out of reach of children.

•For environmental reasons, do not dispose of the machine or expended supply waste

at household waste collection points. Disposal can take place at an authorized

dealer.

•The inside of this machine gets very hot. Do not touch the parts with a label

indicating the “hot surface”. Otherwise, an injury might occur.

•The fusing section of this machine gets very hot. Caution should be taken when

removing misfed paper.

•Keep the machine away from humidity and dust. Otherwise a fire or an electric shock

might occur.

•Do not place the machine on an unstable or tilted surface. If it topples over, an injury

might occur.

•Do not use aluminum foil, carbon paper, or similar conductive paper to avoid a fire or

machine failure.

•If you use the machine in a confined space, make sure there is a continuous air

turnover.

•If toner or used toner is inhaled, gargle with plenty of water and move into a fresh air

environment. Consult a doctor if necessary.

•If toner or used toner gets into eyes, wash eyes immediately using lots of water.

Consult a doctor if necessary.

•If toner or used toner is swallowed, dilute it by drinking lots of water. Consult a doctor

if necessary.

•Avoid getting toner on your clothes or skin when removing a paper jam or replacing

toner. If your skin comes into contact with toner, wash the affected area thoroughly

with soap and water.

•If toner gets on your clothing, wash it using cold water. Hot water will set the toner

into the fabric and might make removing the stain impossible.

SAFETY AND ECOLOGICAL NOTES FOR DISPOSAL

1. Do not incinerate toner bottles or used toner. Toner dust may ignite suddenly

when exposed to an open flame.

2. Dispose of used toner, developer, and organic photoconductors in

accordance with local regulations. (These are non-toxic supplies.)

3. Dispose of replaced parts in accordance with local regulations.

Table of Contents

CONVENTIONS USED IN THIS MANUAL.......................................................... 2

GENERAL SAFETY INSTRUCTIONS................................................................. 2

1. BEFORE YOU BEGIN… ..................................................................6

2. COMMON PROCEDURES.............................................................10

2.1 SWITCH THE MACHINE OFF BEFORE BEGINNING ANY PROCEDURE!10

2.2 OPENING THE TCRU DISPLAY................................................................. 12

2.3 REMOVING THE FRONT TOP COVER...................................................... 15

2.4 REATTACHING THE FRONT TOP COVER ............................................... 16

3. CHARGE CORONA UNIT ..............................................................17

3.1 REMOVING THE CHARGE CORONA UNIT............................................... 17

3.2 REINSTALLING THE CHARGE CORONA UNIT ........................................ 20

4. DRUM CLEANING UNIT ................................................................22

4.1 REMOVING THE DRUM CLEANING UNIT................................................. 22

4.2 REINSTALLING THE DRUM CLEANING UNIT .......................................... 25

5. DRUM UNIT....................................................................................28

5.1 REMOVING THE DRUM UNIT.................................................................... 28

5.2 REINSTALLING THE DRUM UNIT ............................................................. 30

6. DEVELOPER..................................................................................33

6.1 REMOVING THE USED DEVELOPER ....................................................... 33

6.2 ADDING NEW DEVELOPER ...................................................................... 38

7. IMAGE TRANSFER BELT CLEANING UNIT ................................41

7.1 REMOVING THE IMAGE TRANSFER BELT CLEANING UNIT.................. 41

7.2 INSTALLING THE IMAGE TRANSFER BELT CLEANING UNIT ................ 44

8. PAPER TRANSFER ROLLER UNIT..............................................46

8.1 REMOVING THE PAPER TRANSFER ROLLER UNIT............................... 46

8.2 INSTALLING THE PAPER TRANSFER ROLLER UNIT.............................. 48

1. BEFORE YOU BEGIN…

This manual is only operators who have received training in the procedures shown

in this manual. General users are not to perform the procedures shown in this

manual.

•Never perform any procedure in this manual if you have not received proper

training.

•If you have received training and are not sure about how to do a procedure then

call for service.

•Even if you have received training, never attempt any procedure that is not

shown in this manual.

•Contents of this manual are subject to change without prior notice. In no event

will the company be liable for direct, indirect, special, incidental, or consequential

damages as a result of handling or operating this machine.

What You Need

Use only the tools and materials described in this manual. Use of other tools or

materials could damage the machine or cause injury.

RPG017S

cAccessory hex driver

dBlack hex screws

3Developer bottle

4Drum setting powder pad applicator

You will need the following items:

•Accessory hex driver c(provided). Needed to remove the black hex screws d

from the machine. The black screws in the machine are the only screws that

should be removed.

•Drum setting powder pad applicator (provided). Needed to apply a thin coated of

powder on the drum.

•Newspaper or other paper. Needed to cover your work surface and prevent toner

spillage from components removed from the machine.

Important: The accessory hex driver and drum setting powder pad are included in

the kit that is supplied this machine. Keep this kit in a safe place where you can

find it later. If the kit is not available, contact your supervisor or call for service.

NAMES OF COMPONENTS

RPG062S

1. Toner hopper cover

2. Front top cover

3. Inner cover

4. Left front cover

5. Right front cover

6. Control panel

Parts, Screw Color Codes

•Handles and levers colored purple indicate where you should pull or lift a

component or part to move or remove it.

•Black screws are the screws you must remove in order to remove the unit or

component. Never remove screws of any other color.

CONTROL PANEL (Pro C900)

653 4

1. User Tools

2. Counter

3. Printer function/[fierydriven]

4. ./* key

5. Enter key

6. Clear key

7. On indicator

8. Operation Switch

9. Number keys

CONTROL PANEL (Pro C900S)

534

1. User Tools

2. Counter

3. ./* key

4. Enter key

5. Clear key

6. On indicator

7. Operation Switch

8. Number keys

9. Program

Andere Handbücher für Pro C900

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ricoh Multifunktionsdrucker Handbücher

Ricoh

Ricoh 2051 - Aficio B/W Laser Bedienungsanleitung

Ricoh

Ricoh Aficio 1085 Bedienungsanleitung

Ricoh

Ricoh C6055 Bedienungsanleitung

Ricoh

Ricoh 5502 Gebrauchsanweisung

Ricoh

Ricoh Aficio SP 3510SF Bedienungsanleitung

Ricoh

Ricoh IM C6500 Bedienungsanleitung

Ricoh

Ricoh 8025e Bedienungsanleitung

Ricoh

Ricoh 3690 Bedienungsanleitung

Ricoh

Ricoh Network Guide Montage- und Wartungsanleitung

Ricoh

Ricoh Aficio MP 1600SPF Bedienungsanleitung

Ricoh

Ricoh PRO C9100 Merkblatt

Ricoh

Ricoh TC-IIR Bedienungsanleitung

Ricoh

Ricoh FAX 3320L Betriebsanleitung

Ricoh

Ricoh PT3 Kurzanleitung

Ricoh

Ricoh SP 112 Bedienungsanleitung

Ricoh

Ricoh Aficio 1015 Bedienungsanleitung

Ricoh

Ricoh AFICIO MP C305SP Bedienungsanleitung

Ricoh

Ricoh Aficio SP 1100S Bedienungsanleitung

Ricoh

Ricoh Aficio C2500 Bedienungsanleitung

Ricoh

Ricoh Aficio MP 1100 Bedienungsanleitung

Ricoh

Ricoh 1350 Bedienungsanleitung

Ricoh

Ricoh Aficio SP C232SF Bedienungsanleitung

Ricoh

Ricoh Aficio MP 5500 S/P Gebrauchsanweisung

Ricoh

Ricoh Aficio 470W Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung