Ricoh CL3500N - Aficio Color Laser Printer Bedienungsanleitung

Introduction

This manual contains detailed instructions and notes on the operation and use of this machine. For your

safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy

place for quick reference.

Power Source

120 V, 60 Hz, 11 A or more

Please be sure to connect the power cable to a power source as above.

Laser Safety:

This machine is considered class I laser device, safe for office/ EDP use. The machine contains 5 mil-

liwatt, 770 - 795 nanometer wavelength, AlGaInp Laser Diode (4 provided). Safety precautions and in-

terlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.

Important

Contents of this manual are subject to change without prior notice. In no event will the company be li-

able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-

ating the machine.

Caution:

Use of controls or adjustments or performance of procedures other than those specified in this manual

might result in hazardous radiation exposure.

Do not copy or print any item for which reproduction is prohibited by law.

Copying or printing the following items is generally prohibited by local law:

bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licens-

es.

The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its

completeness or accuracy. If you have any questions concerning the legality of copying or printing cer-

tain items, consult with your legal advisor.

Two kinds of size notation are employed in this manual. With this machine refer to the inch version.

For good copy quality, the supplier recommends that you use genuine toner from the supplier.

The supplier shall not be responsible for any damage or expense that might result from the use of parts

other than genuine parts from the supplier with your office products.

Some illustrations in this manual might be slightly different from the machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

Safety Information

When using your printer, the following safety precautions should always be fol-

lowed.

In this manual, the following important symbols are used:

RWARNING:

Indicates a potentially hazardous situation which, if instructions are not followed, could result

in death or serious injury.

Indicates a potentially hazardous situation which, if instructions are not followed, may result

in minor or moderate injury or damage to property.

•Confirm the wall outlet is near the machine and freely accessible, so

that in the event of emergency, it can be unplugged easily.

•Plug and unplug the power cable with dry hands, or an electric shock

could occur.

•Only connect the machine to the power source described in the manual.

•Avoid multi-wiring.

•Do not damage, break or make any modifications to the power cord.

Do not place heavy objects on it, pull it hard or bend it more than nec-

essary. These actions could cause an electric shock or fire.

•Do not incinerate spilled toner or used toner. Toner dust is flammable

and might ignite when exposed to an open flame.

•Disposal should take place at an authorized dealer or an appropriate

collection site.

•If you dispose of the used toner containers yourself, dispose of them

according to local regulations.

•Dispose at an authorized dealer or approved collection site. If you dis-

pose of the used toner containers yourself, do so according to local

regulations.

•Do not risk electric shock by handling the power cord or plug with wet

hands.

•Do not take apart or attempt any modifications to this machine. There

is a risk of fire, electric shock, explosion or loss of sight. If the ma-

chine has laser systems, there is a risk of serious eye damage.

•The supplied power cord is for use with this equipment only. Do not

use with other appliances. Doing so may result in fire, electric shock,

or injury.

•Keep the machine away from flammable liquids, gases, and aerosols.

A fire or an electric shock might occur.

RCAUTION:

•Place no objects on the right cover.

•Do not pull out the paper tray forcefully. If you do, the tray might fall and

cause an injury.

•The inside of this printer becomes very hot. Do not touch parts labelled “v”

(indicating a hot surface). Touching these parts will result in burns.

•Do not handle the plug with wet hands. Doing so might cause an electrical

shock.

•Keep the machine in an area that is within optimum environmental condi-

tions. Operating the machine in an environment that is outside the recom-

mended ranges of humidity and temperature can cause an electrical fire

hazard. Keep the area around the socket free of dust. Accumulated dust

can become an electrical fire hazard.

•Place the machine on a strong and level surface. Otherwise, it might fall and

injure someone.

•If toner or used toner is inhaled, gargle with plenty of water and move into

a fresh air environment. Consult a doctor if necessary.

•If your skin comes into contact with toner or used toner, wash the affected

area thoroughly with soap and water.

•If toner or used toner gets into your eyes, flush immediately with large

amounts of water. Consult a doctor if necessary.

•If toner or used toner is swallowed, dilute by drinking a large amount of wa-

ter. Consult a doctor if necessary

•Avoid getting toner on your clothes or skin when removing a paper jam or

replacing toner. If your skin comes into contact with toner, wash the affected

area thoroughly with soap and water.

•If toner gets on your clothing, wash with cold water. Hot water will set the

toner into the fabric and may make removing the stain impossible.

•Keep toner (used or unused) and the toner bottle out of reach of children.

•Grip the plug, not the cord, when pulling the plug from the socket. Pulling

the cord causes wear and tear that can result in fire or electric shock.

•Wait at least one hour after power off before replacing parts. Not allowing

the printer to cool may result in burns.

•Lifting the paper feed unit carelessly or dropping it may cause injury.

RCAUTION:

Note

❒Under certain temperature and humidity conditions, printing may cause va-

pour to issue from paper. The standard tray (behind the control panel) may

emit steam during printing.

❒Our products are engineered to meet the highest standards of quality and

functionality. When purchasing expendable supplies, we recommend using

only those specified by an authorized dealer.

Important

❒Rating voltage of the connector for options: Max. DC 24 V.

❒Voltage must not fluctuate more than 10%.

•When removing misfed paper, do not touch the fusing unit because it could

be very hot.

•The printer weights approximately 32 kg (70.5 lb.). When moving the print-

er, use the inset grips on both sides, and lift slowly. The printer will break or

cause injury if dropped.

•Before installing options, the machine should be turned off and unplugged

for at least half an hour. Components inside the machine become very hot,

and can cause a burn if touched.

•Lifting the paper feed unit carelessly or dropping it may cause an injury.

•Do not touch the inside of the controller board compartment. It may cause

a machine malfunction or a burn.

•When moving the machine, each person should hold the handles that are

located on opposite sides, and then lift it slowly. Lifting it carelessly or drop-

ping it may cause an injury.

•When you move the printer, remember to unplug the power cord from the

wall outlet to avoid a fire or an electric shock.

•When moving the printer after use, do not take out any of the Toners, Photo

Conductor Units, nor the Waste Toner Cartridge to prevent toner spill inside

the machine.

•When lifting the machine, use the inset grips on both sides. Otherwise the

printer could break or cause an injury if dropped.

•Before moving the machine, unplug the power cord from the wall outlet. If

the cord is unplugged abruptly, it could become damaged. Damaged plugs

or cords can cause an electrical or fire hazard.

Positions of RWARNING and RCAUTION

labels

This machine has labels for RWARNING and RCAUTION at the positions

shown below. For safety, please follow the instructions and handle the machine

as indicated.

High temperature parts. Turn off the main power and be careful when replac-

ing fusing unit / removing misfed paper.

The inside of this printer becomes very hot. Do not touch parts labelled “v”

(indicating a hot surface). Touching these parts will result in burns.

The inside of this printer becomes very hot. Do not touch parts labelled “v”

(indicating a hot surface). Touching these parts will result in burns.

Do not incinerate toner or toner containers. Toner dust may cause flashback

when exposed to an open flame.

AJT086S

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:

ameans POWER ON.

bmeans POWER OFF.

Note to users in the United States of America

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-

ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television re-

ception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio /TV technician for help.

Caution:

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

Caution (in case of 100BaseTX environment):

Properly shielded cables must be used for connections to host computer (and/or peripheral) in order to

meet FCC emission limits.

Network interface cable with ferrite core must be used for RF interference suppression.

Declaration of Conformity

Product Name: Laser Printer

Model Number: Aficio CL3500N/C7521n/CLP22/LP222cn

Responsible party: Ricoh Corporation

Address: 5 Dedrick Place, West Caldwell, NJ 07006

Telephone number: 973-882-2000

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received,

including interference that may cause undesired operation.

Properly shielded cables must be used for connections to host computer (and/or peripheral)

in order to meet FCC emission limits.

Network interface cable with ferrite core must be used for RF interference suppression.

Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence,

il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran

de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il

doit faire l'objet d'une licence.

Note to users in Canada

Note:

This Class B digital apparatus complies with Canadian ICES- 003.

IEEE 802.11b Interface Unit Type H (R-WL11B):

This device complies with RSS 210 of Industry Canada.

To prevent radio interference to the licensed service, this device must be operated indoors only and

should be kept away from windows to provide maximum shielding.

Remarque concernant les utilisateurs au Canada

Avertissement:

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IEEE 802.11b Interface Unit Type H (R-WL11B):

Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être

utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

Caution: Lithium Batteries (RTC Back-up):

The danger of explosion exists if a battery of this type is incorrectly replaced. Replace only with the

same or an equivalent type recommended by the manufacturer. Discard used batteries in accordance

with the manufacturer's instructions.

EN USA G139-8513

Andere Handbücher für CL3500N - Aficio Color Laser Printer

Inhaltsverzeichnis

Andere Ricoh Drucker Handbücher

Ricoh

Ricoh Pro L5130 Gebrauchsanweisung

Ricoh

Ricoh IJM C180F Bedienungsanleitung

Ricoh

Ricoh 220-240 V Bedienungsanleitung

Ricoh

Ricoh PJ WX4152 Kurzanleitung

Ricoh

Ricoh StreamPunch Pro Betriebsanleitung

Ricoh

Ricoh P C301W Bedienungsanleitung

Ricoh

Ricoh SP150 series Bedienungsanleitung

Ricoh

Ricoh Pro C9200 Bedienungsanleitung

Ricoh

Ricoh P 200 Bedienungsanleitung

Ricoh

Ricoh PRO C7200 Installationsanleitung

Ricoh

Ricoh Aficio MP 171 Bedienungsanleitung

Ricoh

Ricoh CL2000N - 420116 Color Laser 16.9PPM Network... Betriebsanleitung

Ricoh

Ricoh C811DN - Aficio SP Color Laser Printer Bedienungsanleitung

Ricoh

Ricoh Pro C9500 Montageanleitung

Ricoh

Ricoh PRO C7200X Bedienungsanleitung

Ricoh

Ricoh Ri 3000 Bedienungsanleitung

Ricoh

Ricoh SP C250DN Bedienungsanleitung

Ricoh

Ricoh AficioSP C410DN Bedienungsanleitung

Ricoh

Ricoh AP610N - Aficio B/W Laser Printer Bedienungsanleitung

Ricoh

Ricoh Aficio AP4510 Konfigurationshandbuch

Ricoh

Ricoh Pro C9500 Einrichtungshandbuch

Ricoh

Ricoh Pro C5200s Bedienungsanleitung

Ricoh

Ricoh SP 4520 DN Bedienungsanleitung

Ricoh

Ricoh SP C250DN Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung