Ricoh SP 220NW Bedienungsanleitung

Setup Guide

Setting Up the Machine

Installing the Software

LED Status

How to purchase consumables

1. Setting Up the Machine

Power Source / Stromquelle /

Source d’alimentation / Alimentazione /

Strømkilde / Fuente de alimentación /

Stroombron / Strømkilde / Fonte de alimentação /

Fonte de energia / Virtalähde / Strömkälla /

Zdroj napájení / Áramforrás / Źródło zasilania /

Güç Kaynağı / Источник питания / Қуат көзі /

電源/

120 V, 60 Hz, 8 A

220 - 240 V, 50/60 Hz, 5A

110 V, 60 Hz, 8 A

50 15

89.6

20 cm

(7.9 inches)

40 cm

(15.8inches)

45 cm

(17.7 inches)

10 cm

(4.0 inches)

10 cm

(4.0 inches)

DSH050

DSH052

DSH053

DSH054

DSH055

DSH056

DSH057

DSH058

DSH011

DSH059

DSH055

DSH060

DSH014

DSH015

DSH017

DSH018

DSH061

DSH062

DSH063

DSH067

DSH068

Go to page 3 “Installing the Software”. For OS X, see User’s Guide in the

provided CD-ROM or our website (http://www.ricoh.com/printers/sp200/support/

gateway/).

For safe and correct use, please be sure to read the Safety Information before using the machine.

2. Installing the Software

Check how the computer is connected

Specify how to connect to your computer according to the communication environment of your system.

Go to page 4"Connecting the Machine (USB/Network)".

DSH084

connect by

USB interface cable

connect by

Ethernet interface cable

use router (access point)?

Yes

connect by wireless? connect by wired?

connect via Wi-Fi Direct

See Wi-Fi Direct Guide in our website

(http://www.ricoh.com/printers/sp200/

support/gateway/).

connect using CD-ROM

Go to page 5"Easy Setup

Using the CD-ROM".

•To connect using the WPS button, go to page 6“Easy Setup Using the WPS Button”.

•To connect using a PIN code, go to page 7“Easy Setup Using a PIN Code”.

•To set up manually, see User’s Guide in the provided CD-ROM or our website (http://www.ricoh.com/printers/sp200/support/gateway/).

•When the Wi-Fi Direct function is enabled, a Wi-Fi Direct compliant device is recognized as a router (access point), and direct

communication among Wi-Fi Direct-compliant devices becomes possible.

When communicating using the Wi-Fi Direct function, you cannot connect to the Internet at the same time.

Use the machine from a smart device Android iOS

■How to use the machine from a

smart device

For information about using the machine from a

smart device, see the following website or scan

the following QR code from your smart device.

DSH069

■How to use the NFC tag

(Android smart devices only)

When using Android smart devices, download

and install the RICOH SP 200 series SOM from

the following website or QR code, and then touch

the NFC tag on the machine with the device.

http://www.ricoh.com/printers/

sp200/support/gateway/

Connecting the Machine (USB/Network) Windows

DSH071

DSH072

The following items are necessary to set up a wired

connection.

●USB interface cable or Ethernet interface cable

●CD-ROM supplied with the machine

1. Turn on your computer..

2. Insert the provided CD-ROM into the CD-ROM drive of the

computer.

If your computer does not have a CD-ROM drive, download a

setup file from our website (http://www.ricoh.com/printers/sp200/

support/gateway/).

3. Click [Quick Install].

4. The software license agreement appears in the [Software

License Agreement] dialog box. After reading the agreement,

click [Yes].

5. Select [USB Connection] or [Network Connection] according

to communication environment or your device.

6. Follow the instructions in the setup wizard.

7. Click [Finish] in the [Setup Complete] dialog box. If the

installer prompt you to restart Windows, reboot your

computer.

Setup is completed.

Connecting the Machine via Wi-Fi Windows

DSH073

Easy Setup Using the CD-ROM

The following items are necessary to set up a wireless

connection.

●USB interface cable or Ethernet interface cable

●Router (access point)

●CD-ROM supplied with the machine

1. Turn on your computer.

2. Insert the provided CD-ROM into the CD-ROM drive of the

computer.

If your computer does not have a CD-ROM drive, download a

setup file from our website (http://www.ricoh.com/printers/sp200/

support/gateway/).

3. Click [Quick Install].

4. The software license agreement appears in the [Software

License Agreement] dialog box. After reading the agreement,

click [Yes].

5. Select [Wireless Connection].

6. Follow the instructions in the setup wizard.

7. Click [Finish] in the [Setup Complete] dialog box. If the

installer prompt you to restart Windows, reboot your

computer.

Setup is completed.

To connect using the WPS button, go to page 6 “Easy

Setup Using the WPS Button”.

To connect using a PIN Code, go to page 7 “Easy Setup

Using a PIN Code”.

To connect using Wi-Fi Direct, see Wi-Fi Direct Guide in

our website (http://www.ricoh.com/printers/sp200/support/

gateway/).

Easy Setup Using the WPS Button

●Before doing the following procedure, install the printer

driver according to the procedure on page 4

"Connecting the Machine (USB/Network)".

●Make sure the Ethernet cable is not connected to the

machine.

● In Steps 10 to 11, congure each setting within two

minutes.

The following item is necessary to set up a wireless

connection.

●Router (access point)

1. Check that the router (access point) is working correctly.

2. On the [Start] menu in your computer, point to [All

Programs], click [SP 220 Series Software Utilities], and then

click [Smart Organizing Monitor for SP 220 Series].

3. Click [User Tools] tab.

4. Click [Printer Configuration].

5. Enter the access code, and then click [OK].

The default access code is “Admin”.

6. On the [Network 1] tab, select [Active] for [Wireless

Function:].

7. Click [Apply], and then click [OK].

The machine restarts.

8. Repeat steps 3 to 5 to open the [Printer Configuration]

screen.

9. On the [Wireless] tab, select [Setup with WPS] for

[Configuration Method].

10. Click [Connect].

11. Press the WPS button on the router (access point) within

two minutes.

WPS

CHV607

For details about how to use the WPS button, refer to the

manuals for the router (access point).

12. Check the result.

Connection has succeeded:

The Power indicator lights up.

Connection has failed:

All the indicators start to flash simultaneously, and after

30 seconds, only the Power indicator lights up. Try the

connection again.

13. Configuring the Wi-Fi settings is complete.

Easy Setup Using a PIN Code

●Before doing the following procedure, install the printer

driver according to the procedure on page 4

"Connecting the Machine (USB/Network)".

●Make sure the Ethernet cable is not connected to the

machine.

● In Steps 12 to 15, congure each setting within two

minutes.

●To establish a connection using the PIN code, use a

computer that is connected to the router (access point).

●The following item is necessary to set up a wireless

connection.

●Router (access point)

1. Check that the router (access point) is working correctly.

2. Open the PIN code configuration window (web page) for the

router (access point) on your computer.

3. On the [Start] menu in your computer, point to [All

Programs], click [SP 220 Series Software Utilities], and then

click [Smart Organizing Monitor for SP 220 Series].

4. Click [User Tools] tab.

5. Click [Printer Configuration].

6. Enter the access code, and then click [OK].

The default access code is “Admin”.

7. On the [Network 1] tab, select [Active] for [Wireless

Function:].

8. Click [Apply], and then click [OK].

The machine restarts.

9. Repeat steps 4 to 6 to open the [Printer Configuration]

screen.

10. On the [Wireless] tab, select [Setup with WPS] for

[Configuration Method].

11. Select [Wi-Fi Protected Setup with PIN Code] for [One-

Touch Connection Setting (WPS)].

12. Click [Get PIN Code] and check the PIN code.

Write down the PIN code in case you might forget it.

13. Enter the machine’s PIN code (8 digits) on the router (access

point)’s web page.(The web page accessed in Step 2)

14. Execute WPS (PIN system) from the router (access point)’s

web page.

15. Click [Connect].

16. Check the result.

Connection has succeeded:

The Power indicator lights up.

Connection has failed:

All the indicators start to flash simultaneously, and

after 30 seconds, only the Power indicator lights up.

Try the connection again.

17. Configuring the Wi-Fi settings is complete.

Andere Handbücher für SP 220NW

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ricoh Drucker Handbücher

Ricoh

Ricoh Priport DX 3240 Bedienungsanleitung

Ricoh

Ricoh PRIPORT SILVER Service-Handbuch

Ricoh

Ricoh Aficio SP C820DN Bedienungsanleitung

Ricoh

Ricoh Pro C9200 Bedienungsanleitung

Ricoh

Ricoh Aficio SP 3500N Kurzanleitung

Ricoh

Ricoh Aficio AP4510 Konfigurationshandbuch

Ricoh

Ricoh AP1400 Bedienungsanleitung

Ricoh

Ricoh P 502 Bedienungsanleitung

Ricoh

Ricoh Pro C9500 Einrichtungshandbuch

Ricoh

Ricoh InfoPrint Color COLOR 1767 Bedienungsanleitung

Ricoh

Ricoh CL3500N - Aficio Color Laser Printer Bedienungsanleitung

Ricoh

Ricoh F400 Service-Handbuch

Ricoh

Ricoh Aficio MP 1600 Betriebsanleitung

Ricoh

Ricoh IM C300 Bedienungsanleitung

Ricoh

Ricoh Acifio MP C3002 Betriebsanleitung

Ricoh

Ricoh C7528 Bedienungsanleitung

Ricoh

Ricoh Interface Board GX2 Bedienungsanleitung

Ricoh

Ricoh P7575 Bedienungsanleitung

Ricoh

Ricoh M-G1a Handbuch

Ricoh

Ricoh Plockmatic SquareBack Trimmer Handbuch

Ricoh

Ricoh PRO C7200 Bedienungsanleitung

Ricoh

Ricoh 220-240 V Bedienungsanleitung

Ricoh

Ricoh FT3320 Kurzanleitung

Ricoh

Ricoh PRO C9100 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung