Ricoh SP 8400DN Bedienungsanleitung

Read this manual carefully before you use this machine and keep

it handy for future reference. For safe and correct use, be sure to

read the Safety Information in this manual before using the

machine.

For information not found in paper

manuals, see the online manuals available

on our web site

(http://www.ricoh.com/).

Other Information for This Machine

Safety Labels of This Machine

Safety Information for This Machine

Information

Read This First

English

1. Information

Introduction

This manual contains detailed instructions and notes on the operation and use

of this machine. For your safety and benefit, read this manual carefully before

using the machine. Keep this manual in a handy place for quick reference.

Manuals for This Machine

The operating instructions of this machine are provided in the following

formats:

Format Manuals

Printed manuals • Read This First

• Quick Installation Guide

• Start Guide

CD-ROM • Driver Installation Guide

Manuals displayed on the control panel • Operating Instructions (HTML)

Web page • Read This First

• Quick Installation Guide

• Start Guide

• User Guide

• Driver Installation Guide

• Operating Instructions (HTML)

Read This First

Before using the machine, be sure to read the section of this manual entitled

Safety Information. It also describes each regulation and environmental

conformance.

Quick Installation Guide

Describes procedures for unpacking and setting up the machine, which

include loading paper and installing print cartridge, etc.

Start Guide

Describes how to read manuals on the control panel. It also describes how

to log in to the machine.

User Guide

Regarding the basic usage of this machine, frequently used functions,

troubleshooting when an error message appears, etc., summaries are

provided for each user manual.

User Guide is provided in different formats depending on the language:

• English, German, French, Italian, Spanish, Dutch, and Russian: in PDF

• Other languages: in HTML

Operating Instructions (HTML)

Describes the setup for using the machine, how to use functions to print or

for maintenance and specifications, troubleshooting, system settings, and

security functions.

Manuals are available in English, German, French, Italian, Spanish, Dutch,

and Russian.

User Guide and Security Guide are available in the seven languages above

and other languages.

For details about how to use the HTML manuals, see "How to Use the

Operating Instructions", Operating Instructions.

Driver Installation Guide

Describes how to install and configure each driver. This manual is included

in the drivers CD.

• Before you conﬁgure the extended security and authentication settings,

refer to "Before Using This Machine" in the Security Guide.

• You can see the following manuals on the Web page.

• Appendix

• DHCP Option 204

2. Safety Information for This Machine

Safety Symbols for This Machine

The meanings of the safety symbols for this machine are as follows:

Caution

Do not touch

Do not throw into the fire

Do not use the cleaner

Keep out of reach of children

Caution, hot surface

Caution, risk of having hands or arms caught

Safety Information

In this manual, the following important symbols are used:

RWARNING:

Indicates a potentially hazardous situation which, if instructions are not

followed, could result in death or serious injury.

RCAUTION:

Indicates a potentially hazardous situation which, if instructions are not

followed, may result in minor or moderate injury or damage to property.

EnvironmentsWhere the Machine Can be Used

RWARNING:

• Do not use flammable sprays or solvents in the vicinity of this machine.

Also, avoid placing these items in the vicinity of this machine. Doing so

could result in fire or electric shock.

• Do not place vases, plant pots, cups, toiletries, medicines, small metal

objects, or containers holding water or any other liquids, on or close to this

machine. Fire or electric shock could result from spillage or if such objects

or substances fall inside this machine.

RCAUTION:

• Keep the machine away from humidity and dust. Otherwise a fire or an

electric shock might occur.

• Do not place the machine on an unstable or tilted surface. If it topples over,

an injury might occur.

• Do not place heavy objects on the machine. Doing so can cause the

machine to topple over, possibly resulting in injury.

• Make sure the room where you are using the machine is well ventilated

and spacious. Good ventilation is especially important when the machine is

used heavily.

• Do not obstruct the machine’s vents. Doing so risks fire caused by

overheated internal components.

Handling Power Cords and Power Plugs

RWARNING:

• Do not use any power sources other than those that match the

specifications shown. Doing so could result in fire or electric shock.

• Do not use any frequencies other than those that match the specifications

shown. Doing so could result in fire or electric shock.

• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.

• Do not use extension cords. Doing so could result in fire or electric shock.

• Do not use power cords that are damaged, broken, or modified. Also, do not

use power cords that have been trapped under heavy objects, pulled hard, or

bent severely. Doing so could result in fire or electric shock.

• If the power cord is damaged and its inner wires are exposed or broken,

contact your service representative for a replacement. Use of damaged

power cords could result in fire or electric shock.

Be sure to disconnect the plug from the wall outlet at least once a year and

check for the following:

• There are burn marks on the plug.

• The prongs on the plug are deformed.

If any of the above conditions exist, do not use the plug and consult your dealer

or service representative. Use of the plug could result in fire or electric shock.

Be sure to disconnect the power cord from the wall outlet at least once a year

and check for the following:

• The power cord’s inner wires are exposed, broken, etc.

• The power cord’s coating has a crack or dent.

• When bending the power cord, the power turns off and on.

• Part of the power cord becomes hot.

• The power cord is damaged.

If any of the above conditions exist, do not use the power cord and consult

your dealer or service representative. Use of the power cord could result in

fire or electric shock.

• Touching the prongs of the power cable’s plug with anything metallic

constitutes a fire and electric shock hazard.

• The supplied power cord is for use with this machine only. Do not use it with

other appliances. Doing so could result in fire or electric shock.

• It is dangerous to handle the power cord plug with wet hands. Doing so

could result in electric shock.

RCAUTION:

• Be sure to push the plug of the power cord fully into the wall outlet. Partially

inserted plugs create an unstable connection that can result in unsafe

buildup of heat.

• If this machine is not going to be used for several days or longer at a time,

disconnect its power cord from the wall outlet.

• When disconnecting the power cord from the wall outlet, always pull the

plug, not the cord. Pulling the cord can damage the power cord. Use of

damaged power cords could result in fire or electric shock.

• Be sure to disconnect the plug from the wall outlet and clean the prongs

and the area around the prongs at least once a year. Allowing dust to build

up on the plug constitutes a fire hazard.

• When performing maintenance on the machine, always disconnect the

power cord from the wall outlet.

• Power Source

120–127 V, 12 A or more, 60 Hz

Please be sure to connect the power cord to a power source as above.

Handling the Main Machine

RWARNING:

• Be sure to locate the machine as close as possible to a wall outlet. This will

allow easy disconnection of the power cord in the event of an emergency.

• If the machine emits smoke or odours, or if it behaves unusually, you

must turn off its power immediately. After turning off the power, be sure

to disconnect the power cord plug from the wall outlet. Then contact your

service representative and report the problem. Do not use the machine.

Doing so could result in fire or electric shock.

• If metal objects, or water or other fluids fall inside this machine, you must

turn off its power immediately. After turning off the power, be sure to

disconnect the power cord plug from the wall outlet. Then contact your

service representative and report the problem. Do not use the machine.

Doing so could result in fire or electric shock.

• When replacing the Fusing Unit, turn the main power switch off and wait at

least 60 minutes before proceeding with the replacement.

• Do not touch this machine if a lightning strike occurs in the immediate

vicinity. Doing so could result in electric shock.

• The following explains the warning messages on the plastic bag used in

this product’s packaging.

• Keep the polythene materials (bags, etc.) supplied with this machine

away from babies and small children at all times. Suffocation can result

if polythene materials are brought into contact with the mouth or nose.

RCAUTION:

• Unplug the power cord from the wall outlet before you move the machine.

While moving the machine, take care that the power cord is not damaged

under the machine. Failing to take these precautions could result in fire or

electric shock.

• If you have to move the machine when the optional paper tray unit is

attached, do not push on the main unit’s top section. Doing so can cause

the optional paper tray unit to detach, possibly resulting in injury.

• The machine weighs approximately 57 kg (125.7 lb.).

• When moving the printer, hold the handles located on both sides, and then

lift it slowly. Lifting it carelessly or dropping it may cause an injury.

• If the lower paper tray is installed, do not pull out more than one tray at a

time when you are changing or replenishing paper or resolving paper jams.

Pressing down forcefully on the machine's upper surfaces can result in

malfunctions and/or user injury.

• Contact your service representative if you need to lift the machine (such

as when relocating it to another floor). Do not attempt to lift the machine

without the assistance of your service representative. The machine will

be damaged if it topples or is dropped, resulting in malfunction and risk of

injury to users.

• Do not look into the lamp. It can damage your eyes.

• Do not hold the control panel while moving the machine. Doing so may

damage the control panel, cause a malfunction, or result in injury.

• Do not pull out paper trays while moving the machine. Doing so may

damage the control panel, cause a malfunction, or result in injury.

Handling the Machine’s Interior

RWARNING:

• Do not remove any covers or screws other than those explicitly mentioned

in this manual. Inside this machine are high voltage components that are

an electric shock hazard and laser components that could cause blindness.

Contact your sales or service representative if any of the machine’s internal

components require maintenance, adjustment, or repair.

• Do not attempt to disassemble or modify this machine. Doing so risks burns

and electric shock. Note again that exposure to the laser components

inside this machine risks blindness.

RCAUTION:

• Some of this machine's internal components get very hot. For this reason,

take care when removing misfed paper. Not doing so could result in burns.

• Some of the internal components of this machine might be fragile. When

you remove jammed paper, do not touch the sensors, connectors, LEDs, or

other fragile parts that are shown in the Troubleshooting manual. Doing so

may cause malfunctions.

• When removing jammed paper, make sure not to trap or injure your fingers.

• When loading paper, take care not to trap or injure your fingers.

• Keep your hands clear of the booklet finisher tray when removing misfed

paper, pulling out or pushing in the finisher's staple unit. You can trap and

injure your fingers if you do not.

• While safety measures have been installed to prevent accidents, you must

not touch the machine's rollers while it is operating. Doing so could cause

injury.

• If the machine's interior is not cleaned regularly, dust will accumulate. Fire

and breakdown can result from heavy accumulation of dust inside this

machine. Contact your sales or service representative for details about and

charges for cleaning the machine's interior.

Andere Handbücher für SP 8400DN

Inhaltsverzeichnis

Sprachen:

Andere Ricoh Drucker Handbücher

Ricoh

Ricoh P801 Bedienungsanleitung

Ricoh

Ricoh PJ WX4152 Kurzanleitung

Ricoh

Ricoh Pro C651EX Betriebsanleitung

Ricoh

Ricoh Aficio MP 1600SPF Service-Handbuch

Ricoh

Ricoh InfoPrint 1892 Bedienungsanleitung

Ricoh

Ricoh P C301W Bedienungsanleitung

Ricoh

Ricoh C410DN - Aficio SP Color Laser Printer Bedienungsanleitung

Ricoh

Ricoh Aficio GX3050N Bedienungsanleitung

Ricoh

Ricoh Aficio SP C231SF Bedienungsanleitung

Ricoh

Ricoh D182 Handbuch

Ricoh

Ricoh aficio SG 2100N Bedienungsanleitung

Ricoh

Ricoh Aficio GX3000 Bedienungsanleitung

Ricoh

Ricoh Aficio CL5000 Handbuch

Ricoh

Ricoh GXe3300N Bedienungsanleitung

Ricoh

Ricoh 5100N - Aficio SP B/W Laser Printer Bedienungsanleitung

Ricoh

Ricoh SG 7100DN Bedienungsanleitung

Ricoh

Ricoh MP 2501SP Gebrauchsanweisung

Ricoh

Ricoh Ri 4000 Bedienungsanleitung

Ricoh

Ricoh BRG-P1w Kurzanleitung

Ricoh

Ricoh Pro 8100S Bedienungsanleitung

Ricoh

Ricoh Aficio G700 Installations- und Benutzerhandbuch

Ricoh

Ricoh Aficio SP C431DN-HS Bedienungsanleitung

Ricoh

Ricoh SP221s Bedienungsanleitung

Ricoh

Ricoh AP410 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung