Rigol RP1002C Bedienungsanleitung

RIGOL

User’s Guide

RP1002C Current Probe

Mar. 2013

RIGOL Technologies, Inc

RIGOL

RP1002C User’s Guide I

Guaranty and Declaration

Trademark Information

RIGOL is a registered trademark of RIGOL Technologies, Inc.

Publication Number

UGE17102-1110

Notices

RIGOL products are protected by patent law in and outside

of P.R.C.

RIGOL reserves the right to modify or change parts of or all

the specifications and pricing policies at company’s sole

decision.

Information in this publication replaces all previously

corresponding material.

RIGOL shall not be liable for losses caused by either

incidental or consequential in connection with the furnishing,

use or performance of this manual as well as any information

contained.

Any part of this document is forbidden to be copied or

photocopied or rearranged without prior written approval of

RIGOL.

Product Certification

RIGOL guarantees this product conforms to the national and

industrial standards in China as well as the ISO9001:2008

standard and the ISO14001:2004 standard. Other international

standard conformance certification is in progress.

If you have any problem or requirement when using our products,

please contact RIGOL Technologies, Inc. or your local distributors,

or visit: www.rigol.com.

RIGOL

II RP1002C User’s Guide

General Safety Summary

Please review the following safety precautions carefully before

putting the instrument into operation so as to avoid any personal

injuries or damages to the instrument and any product connected

to it. To prevent potential hazards, please use the instrument only

specified by this manual.

Ground The Instrument.

The instrument is grounded through the Protective Earth lead of

the power cord. To avoid electric shock, it is essential to connect

the earth terminal of power cord to the Protective Earth terminal

before any inputs or outputs.

Observe All Terminal Ratings.

To avoid fire or shock hazard, observe all ratings and markers on

the instrument and check your manual for more information about

ratings before connecting.

Replace Fuse Properly

Make sure that no overvoltage (such as voltage caused by

thunderbolt) this product. Otherwise, the operator might be

exposed to electric shock.

Do Not Operate Without Covers.

Do not operate the instrument with covers or panels removed.

Avoid Circuit or Wire Exposure.

Do not touch exposed junctions and components when the unit is

powered.

RIGOL

RP1002C User’s Guide III

Do Not Operate With Suspected Failures.

If you suspect damage occurs to the instrument, have it inspected

by qualified service personnel before further operations. Any

maintenance, adjustment or replacement especially to circuits or

accessories must be performed by RIGOL authorized personnel.

Keep Well Ventilation.

Inadequate ventilation may cause increasing of temperature or

damages to the device. So please keep well ventilated and inspect

the intake and fan regularly.

Do Not Operate in Wet Conditions.

In order to avoid short circuiting to the interior of the device or

electric shock, please do not operate in a humid environment.

Do Not Operate in an Explosive Atmosphere.

In order to avoid damages to the device or personal injuries, it is

important to operate the device away from an explosive

atmosphere.

Keep Product Surfaces Clean and Dry.

To avoid the influence of dust and/or moisture in air, please keep

the surface of device clean and dry.

Electrostatic Prevention.

Operate in an electrostatic discharge protective area environment

to avoid damages induced by static discharges. Always ground

both the internal and external conductors of the cable to release

static before connecting.

RIGOL

IV RP1002C User’s Guide

Safety Terms and Symbols

Terms in this Manual. These terms may appear in this manual:

WARNING

Warning statements indicate the conditions or practices

that could result in injury or loss of life.

CAUTION

Caution statements indicate the conditions or practices

that could result in damage to this product or other

property.

Terms on the Product. These terms may appear on the

Product:

DANGER indicates an injury or hazard may immediately

happen.

WARNING indicates an injury or hazard may be accessible

potentially.

CAUTION indicates a potential damage to the instrument or

other property might occur.

Symbols on the Product. These symbols may appear on the

product:

Double

Insulation

Safety

Warning

Protective

Earth

Terminal

Chassis

Ground

Test

Ground

RIGOL

RP1002C User’s Guide V

Contents

Guaranty and Declaration................................................... I

General Safety Summary...................................................II

Safety Terms and Symbols ...............................................IV

RP1002C Overview.............................................................1

Basic Operation ..................................................................1

Connection between the Current Probe and Oscilloscope.......1

Connection between the Current Probe and Digital Meter......4

Maintenance.......................................................................5

Battery..............................................................................5

To Install the Battery..........................................................6

AC Power Adapter..............................................................6

Cleaning............................................................................7

Preparation for shipment ....................................................7

Specifications .....................................................................8

Electrical Characteristics .....................................................8

Voltage and Current Ratings................................................9

Physical Characteristics.......................................................9

Environmental Characteristics............................................10

Certifications and Compliances..........................................10

Accessories.......................................................................12

Appendix...........................................................................13

Appendix 1 Gain versus Frequency at 1 A Peak (Typical) .....13

Appendix 2 Maximum Current versus Frequency.................14

Appendix 3 DC Signal Linearity in 50mV/A Range (Typical)..14

Appendix 4 Phase versus Frequency at 1 A Peak (Typical)...15

RIGOL

RP1002C User’s Guide 1

RP1002C Overview

The RP1002C current probe enables a general purpose

oscilloscope to display AC and DC current signals up to 100 A Peak

(70 A RMS). The RP1002C current probe can also make AC and

DC measurements with a multimeter by using the BNC-to-banana

plug adapter.

Figure 1 RP1002C Current Probe

BNC Interface

Test Clamp Button

Test Clamp

AC Adapter Input

Range Switch

Zero Adjustment Knob

Overload Indicator

Power Supply Indicator

Maximum Conductor Size: 11mm

RIGOL

2 RP1002C User’s Guide

Control/Indicator Description

Current flow symbol: The arrow shows

the positive direction of current flow

Zero adjustment: After connecting to

power and fixing the current probe to a

fixed position, rotate the knob to adjust

the probe output tothe proper DC offset. It

may also be used to offset a DC signal

component. Zeroing is not needed for AC

measurements unless your instrument

cannot isolate a DC component (if

present).

Range switch: Slide the switch from OFF

to either the 50 mV/A or 500mV/A range.

When 50 mV/A or 500mV/A is selected,

the probe is turned on, and the green

battery indicator (ON) lights.

Power Supply indicator: The green

power supply indicator lights when the

probe is turned on. For more information,

please refer to To Install the Battery.

Overload indicator: The red overload

indicator lights and flicks continuously if

the measured signal is greater than the

maximum range of the selected range

capacity.

Andere Handbücher für RP1002C

Inhaltsverzeichnis

Andere Rigol Messgerät Handbücher

Rigol

Rigol MSO1000Z series Bedienungsanleitung

Rigol

Rigol DSA800 Series Bedienungsanleitung

Rigol

Rigol DS1202Z-E Bedienungsanleitung

Rigol

Rigol RSA5065N-OCXO Bedienungsanleitung

Rigol

Rigol DSA1030A series Bedienungsanleitung

Rigol

Rigol RSA5000 Series Bedienungsanleitung

Rigol

Rigol RP1003C Bedienungsanleitung

Rigol

Rigol DSA800E Series Betriebsanleitung

Rigol

Rigol PHA0150 Bedienungsanleitung

Rigol

Rigol DM3068 Bedienungsanleitung

Rigol

Rigol PCA1500 Bedienungsanleitung

Rigol

Rigol RSA3000 Series Installations- und Betriebshandbuch

Rigol

Rigol DSA1000 Series Installations- und Betriebshandbuch

Rigol

Rigol DL3032 Bedienungsanleitung

Rigol

Rigol DSA700 series Bedienungsanleitung

Rigol

Rigol RP1000D Series Bedienungsanleitung

Rigol

Rigol DSA1000A Series Bedienungsanleitung

Rigol

Rigol DSA700 series Bedienungsanleitung

Rigol

Rigol RP1001C Bedienungsanleitung

Rigol

Rigol RP1003C Bedienungsanleitung

Rigol

Rigol DS1000CA series Bedienungsanleitung

Rigol

Rigol DS Series Kurzanleitung

Rigol

Rigol DL3021 Bedienungsanleitung

Rigol

Rigol DSA800 Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung