Risco EL-5829 Bedienungsanleitung

2-Way Wireless

LCD Keypad

Model: EL-5829

Installation and User Guide

Language

Page

1. Description

The EL-5829 is a 2-Way wireless keypad with LCD display used to remotely

program and operate the iConnect 2-Way systems.

The keypad's functionality is identical to the keys on the iConnect 2-Way front panel.

Note: Programming mode can be established either from a keypad or from the

main panel, but not simultaneously.

What’s in the Box

•2-Way LCD wireless keypad

•4 x CR123 Lithium batteries

•5 wooden screws 3.5 x 25 mm

•Installation Instructions

2. Installation

Registration

The EL-5829 keypad must identify itself to the system receiver. This is done by

registering the keypad to the iConnect 2-Way, as follows.

1. Set the system to Registration mode.

a. Go to the main menu and select [9]>[1]>[3]

(Programming > Devices > Keypads).

b. Select a keypad (1 - 4).

2. Release the mounting bracket.

3. Open the battery compartment and insert the batteries. Pay attention to the

correct polarity.

4. As soon as 'Save?' appears on the Control System’s LCD screen, press '√'.

Deleting a Keypad

➢To delete a wireless keypad from the system:

1. Set the system to Delete mode.

a. Go to the main menu and select [9]>[1]>[3]

(Programming > Devices > Keypads).

b. Select a keypad (1 - 4).

c. Select the Delete menu.

d. Press > .

2. Take out the keypad batteries.

3. Insert the batteries.

4. Within a 30-second time period, press and simultaneously for

three seconds; the keypad will display the software version and

'Not Registered'.

Wall Mounting

After the keypad has been registered to the system mount the keypad on the wall

using the supplied mounting bracket.

Notes:

1. Before mounting the keypad test the keypad communication with the system.

To do so, try to arm the system using one of the arming buttons on the wireless

keypad (see Figure 1).

2. Minimum mounting distance between the wireless keypad and the panel is

1.5m.

➢To mount the keypad:

1. Release the mounting bracket.

2. Attach the mounting bracket to the wall using the supplied screws (see

figure 1).

Figure 1

3. Attach the wireless keypad to the mounting bracket by sliding the keypad

down onto the bracket‘s four hooks (see figure 2).

Mounting

Mounting hole for tamper

Mounting Mounting

Figure 2

4. Attach the housing screw at the bottom of the front cover (see figure 3).

Figure 3

Note:To use the back tamper, the back-tamper screw must be installed.

3. Main User Operations

Control Keys

Key

Operation

In Normal Operation mode: Used for Away (Full setting).

In Normal Operationmode: Used for Stay arming (Part Setting).

In Normal Operation mode: used to enter the menus with code.

Long press: activates quick registration

Used also to terminate commands and confirm data to be stored.

In Normal Operation mode: Used for Perimeter arming.

Provides the system status.

Used to scroll up a list or to move the cursor to the left;

Used to scroll down a list or to move the cursor to the right.

To view system trouble list

In User Functions menu: used to move back one step in the menu.

Long press: activates quick delete mode

Emergency Keys

The following operations will send emergency notifications to the alarm monitoring

station.

Key

Operation

Pressing both keys simultaneously for at least two

seconds activates a Fire alarm

Pressing both keys simultaneously for at least two

seconds activates an Emergency alarm

Pressing both keys simultaneously for at least two

seconds activates a Police (Panic) alarm.

Used for tele-control.

In User Functions menu, used to change data:

•To enter space, press left key

•To delete data, press right key

Long press of right key to activate Battery Replace mode

Function Keys

Key

Operation

Numerical keys that are used to input numeric codes

(arming, disarming or used to activate specific

functions).

4. Visual Indicators

The following visual indicators are displayed on the LCD panel:

Icon

Indication

Operation

Power

System is operating properly from AC

power and backup battery is in good

condition

Slow flash

Control Panel/Keypad low battery

Rapid flash

Control Panel AC loss

Trouble / Tamper

System trouble

Off

System is operating normally

Rapid flash

Zone/keypad/external module has been

tampered

Ready

System is ready to be Set

Off

System is not ready to be Set/Arm

Set / Alarm

System is set in Full Set, Part Set or

Perimeter Set mode

Off

System is Unset

Rapid Flash

Alarm condition

5. Replacing Batteries

When the batteries need to be replaced the indicator will flash.

➢To replace the batteries:

1. From the control panel, long press to enter replace battery mode.

2. Remove the keypad from the wall.

3. Open the battery compartment (see Figure 4).

Figure 4

4. Pull out the batteries and replace them with new ones. Pay attention to the

polarity when inserting the new batteries (see Figure 5)

Inhaltsverzeichnis

Sprachen:

Andere Risco Tastenfeld Handbücher

Risco

Risco Agility 2-way Wireless LCD Keypad Bedienungsanleitung

Risco

Risco lightsys RP432KP Bedienungsanleitung

Risco

Risco RPKELW Bedienungsanleitung

Risco

Risco RPKEL Bedienungsanleitung

Risco

Risco RP432KP02 Bedienungsanleitung

Risco

Risco Panda RW332KP Bedienungsanleitung

Risco

Risco lightsys RP432KPP Bedienungsanleitung

Risco

Risco RPKELW Bedienungsanleitung

Risco

Risco RW132KPPW3 Bedienungsanleitung

Risco

Risco Agility 132KP Bedienungsanleitung

Risco

Risco Panda RW332K Bedienungsanleitung

Risco

Risco RW332KPP400D Bedienungsanleitung

Risco

Risco lightsys 2 Gebrauchsanweisung

Risco

Risco RPKELP Bedienungsanleitung

Risco

Risco RW132KL1 Bedienungsanleitung

Risco

Risco GARDTEC 872 Bedienungsanleitung

Risco

Risco RPKELWP Bedienungsanleitung

Risco

Risco RW132KPPW3 Bedienungsanleitung

Risco

Risco RPKELW Bedienungsanleitung

Risco

Risco lightsys RP432KP Bedienungsanleitung

Risco

Risco ProSYS KP Bedienungsanleitung

Risco

Risco Agility RW132KL1P Bedienungsanleitung

Risco

Risco RPKELW Bedienungsanleitung

Risco

Risco WL Panda Bedienungsanleitung

Beliebte Tastenfeld Handbücher anderer Marken

BFT

BFT SELETTO Bedienungsanleitung

Micro Id

Micro Id MP7G3BL Gebrauchsanweisung

WindowMaster

WindowMaster WLI 130 Bedienungsanleitung

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung