Ritchie Yellow Jacket ManTooth Series Bedienungsanleitung

ManTooth™Dual Pressure

Wireless Digital P/T Gauge

ManTooth

™

Single Pressure

Wireless Digital P/T Gauge

User’s Manual

Made for iPhone 6 Plus, iPhone 6,

iPhone 5s, iPhone 5c, iPhone 5,

iPhone 4s, iPhone 4, iPad Air 2, iPad Air,

iPad mini 3, iPad mini 2, iPad mini, iPad 4,

iPad (3rd generation), iPad 2

iPhone, iPad and Retina are trademarks of Apple Inc.,

registered in the U.S. and other countries. iPad Air

and iPad mini are trademarks of Apple, Inc.

Android and Google Play are trademarks of Google Inc.

The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use

of such marks by Ritchie Engineering is under license.

Other trademarks and trade names are those of their

respective owners.

“Made for iPhone” and “Made for iPad”

mean that an electronic accessory has been

designed to connect speciﬁcally to iPhone,

or iPad, respectively, and has been certiﬁed

by the developer to meet Apple

performance standards. Apple is not

responsible for the operation of this device

or its compliance with safety and regulatory

standards. Please note that the use of this

accessory with iPhone, or iPad may affect

wireless performance.

Before You Start

Contacng Ritchie

To order accessories, receive assistance, or

locate the nearest YELLOW JACKET distributor.

Safety Informaon

Use the instrument only as speciﬁed in this

manual. Otherwise, the protecon provided by

the instrument may be impaired. Refer to the

safety informaon.

A Warning idenﬁes condions and acons

that pose hazards to the user. A Cauon

idenﬁes condions and acons that may

damage the instrument or the equipment

under test.

Warning

To avoid personal injury or death, follow these

guidelines:

Most governments and legal authories

require that HVAC technicians be

trained and cerﬁed in the safe and

proper operaon of HVAC tools, such as

this instrument. Since this tool may be

connected to many types of equipment

through a limitless combinaon of hoses

and ﬁngs, proper training is the most

important element of using this tool

safely.

Read the enre Users Manual before

using the instrument.

Use the instrument only as described in

this Users Manual, otherwise the

protecon provided by the equipment

may be impaired.

Do not use the instrument if it is

damaged. Before you use the

instrument, inspect the case. Look for

cracks or loose components.

The instrument contains no internal

user serviceable parts

Do not open the instrument.

Have the instrument serviced only by

Ritchie Engineering Co. or authorized

service centers.

Do not use the instrument if it operates

abnormally. Protecon may be

impaired. When in doubt, have the

instrument serviced.

Do not operate the instrument around

explosive gas, vapor, or dust.

Various refrigerants have been

intenonally excluded for very

signiﬁcant safety reasons.

Never use refrigerants in this

instrument that are not listed in the Set-

up menu.

The refrigerant database in this unit

may include refrigerants classiﬁed as

ﬂammable. If such refrigerants are

selected, the operator may need

addional cerﬁcaons and/or training.

Consult your government and legal

authority and comply fully with all

requirements.

Always wear eye and skin protecon

when working with refrigerants.

Escaping refrigerant vapors will present

afreezing danger. Do not direct

•

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

refrigerant vapors venng from hoses

towards the skin.

Maximum Working Pressure: 700 psia

(4.83 MPa)

Because this instrument allows for

various inputs including electrical and

mechanical, care must be taken to

observe any ways that an electrical

shock hazard could develop. Example:

Wet or humid condions, along with a

sensor, could allow an electrical path

across the instrument. Keep all

interconnected equipment clean,

organized, and in proper condion. Do

not use the instrument if you are not

qualiﬁed to recognize potenal

electrical faults.

Cauon

To avoid damage to equipment, follow these

guidelines:

Do not allow pressures beyond the

speciﬁcaons listed in this manual.

Do not aempt to introduce liquid or

samples heavily laden with oil into the

instrument.

Read and observe instrucons and

speciﬁcaons related to the baeries

used in this instrument that may cause

damage to it.

Do not use this instrument on systems

containing leak sealing chemicals. These

leak sealants can collect and harden in

the instrument, causing permanent

damage.

Only use this instrument with the

protective boot in place as this protects

the charging port and temperature

probe connecon ports from unwanted

contaminants.

Do not use damaged USB chargers to

recharge the ManTooth PT Module as

this could damage the circuitry and/or

baery.

Only use with refrigerants approved for

use with the ManTooth PT Module. Use

of unapproved refrigerants may cause

damage to the ManTooth PT Module. A

complete list of approved refrigerants

can be found in the ManTooth RSA app

in the “Select Refrigerant” opon.

Geng Started

The ManTooth PT Module is a precise

instrument to accurately measure and report

the crical informaon needed to service

refrigeraon and air-condioning equipment.

The ManTooth PT Module reports the system

informaon directly to your smartphone or

tablet by means of a class 1 Bluetooth v.2.1

radio. The ManTooth PT Module is compable

with any iOS device running iOS 7.0 or later and

Android devices running Android 4.0.3 (Ice

Cream Sandwich) or later.

Before you use your ManTooth PT Module for

the ﬁrst me you should make sure that it is

fully charged. You will also need to download

the free ManTooth RSA Pressure/Temperature

App from the Apple App Store for iOS devices

or the Google Play store for Android devices.

You can either use the QR code links that are

on your ManTooth PT Module packaging,

follow the links that are available on

YellowJacket.com, or just search for Yellow

Jacket ManTooth in either app store.

Pairing

To display service readings your ManTooth PT

Module must be connected via Bluetooth to an

iOS phone or tablet running iOS 7.0+ or an

•

Android phone or tablet running Android 4.0.3+

(Ice Cream Sandwich or later). To connect your

ManTooth PT Module to your phone or tablet

the two must ﬁrst be paired to one another.

The pairing of the module to your device is

done in your phone or tablet’s sengs.

**Note** you only need to pair your ManTooth

PT Module the ﬁrst me you connect it to your

phone or tablet, however, if you force your

phone or tablet to “forget” your ManTooth PT

Module you will need to re-pair. **Note** your

ManTooth PT Module can be paired with

mulple devices at the same me. However, it

can only be connected and sending readings to

one phone or tablet at a me.

To pair your ManTooth PT Module you ﬁrst

need to open the sengs menu on the phone

or tablet you wish to pair to your ManTooth PT

Module. Next tap on “Bluetooth” to enter the

Bluetooth sengs. Be sure to turn your phone

or tablet’s Bluetooth radio on if it is not already

on.

Next turn your ManTooth PT Module on by

pressing and releasing the power buon on the

main module. If you have a 67002 dual unit the

main module is the one that says “ManTooth

PT Module” on the label not the one that says

“ManTooth PT Tether Module”. The module

will go through a brief start up sequence then

the light on your ManTooth PT Module should

start to blink blue. This means that your

ManTooth PT Module is searching for available

Bluetooth devices to connect with. Next, if you

are using an Android phone or tablet, tap on

“Scan” at the boom of the screen to scan for

available devices. Apple iOS devices should

automacally scan for available Bluetooth

devices.

Your ManTooth PT Module should then show

up as an available device to pair with on your

phone or tablet’s screen. This may take up to

30 seconds.

**Note** Your ManTooth PT Module’s name is

the same as the serial number and is printed on

the main module’s label just above the model

number (67001 or 67002).

Once your ManTooth PT Module shows up as

an available device tap on it’s name to pair it

with your phone. On Android systems a

“Bluetooth pairing request” alert may pop up

asking to conﬁrm the passkey tap on “OK” to

connue.

Apple iOS Android

Aer pairing your Apple iOS phone or tablet to

your ManTooth PT Module it should show up as

either “Connected” or “Not Connected” rather

than “Not Paired” on the Bluetooth sengs

screen. On Android devices under the “Paired

devices” secon on the Bluetooth sengs

screen.

On Apple iOS devices once your ManTooth PT

Module is paired if it is listed as “Connected”

the light on the module will glow a solid blue.

However, on all Android devices or if your iOS

device lists your ManTooth PT Module as “Not

Connected” the light will connue to blink blue.

This is normal.

ManTooth RSA App

This secon will go over the various funcons,

sengs, and procedures of the ManTooth RSA

Pressure/Temperature App.

If you have not already downloaded the Yellow

Jacket ManTooth RSA Pressure/Temperature

App go to either the Apple App Store or the

Google Play Store now to download the free

app. You can either use the QR code links that

are on your ManTooth PT Module packaging,

follow the links that are available on

YellowJacket.com, or just search for Yellow

Jacket ManTooth in either app store.

General Sengs

The General Sengs menu is where you can set

up and change various funcons of your

ManTooth RSA app to personalize it for your

speciﬁc needs.

To access the general sengs on the ﬁrst

screen available upon opening the ManTooth

RSA app tap on the gear in the upper right

corner of the screen.

Apple iOS Android

Android

Service Management

Your Informaon

Here you can set your own name and your

company name. This informaon will

automacally appear in the e-mails containing

the system readings which you can send

directly from within the app.

Locaons and Equipment

Here you are able to create new locaons, add

addional units to exisng locaons, remove

units from locaons or completely remove

exisng locaons. **Note** If you delete an

enre locaon all screen shots associated with

this locaon and any equipment at this locaon

will all be deleted. Deleted locaons and

associated screen shots can not be retrieved.

Similarly if you delete equipment from a

locaon the screen shots associated with that

equipment will also deleted. Deleted

equipment and associated screen shots can not

be retrieved.

Preferences

Temperature Preference

Set the units that the temperature readings

from the temperature sensors, Vapor

Saturaon, Liquid Saturaon, and the values for

Superheang and Subcooling are displayed in.

Opons are degrees Fahrenheit (°F) or degrees

Celsius (°C). Default temperature units are

degrees Fahrenheit (°F)

Pressure Preference

Set the units that the pressure readings are

displayed in. Available units are bar, pounds per

square inch absolute (psia), pounds per square

inch gauge (psig), kilopascals (kPa),

Megapascals (MPa), and kilogram per square

cenmeter (kg/cm^2). The default pressure

units are pounds per square inch gage (psig)

Auto Sleep

This opon will disable your phone or tablet’s

automac sleep funcon so that while you are

in a session taking readings your phone or

tablet will not automacally go to sleep which

could disrupt your session and readings. The

default auto sleep seng is Override Auto

Sleep = Oﬀ.

Device Management

Power Down Connected Devices

This is another way of shung oﬀyour

connected ManTooth PT Module(s) if you are

not near enough to your module(s) to press the

power buon(s) and want to turn the power

completely oﬀ.

Calibrate Device Readings

This gives you the opon to adjust the

calibraon of your ManTooth PT Module’s

pressure readings or temperature readings

away from the factory defaults.

Restore Factory Defaults

This will clear any calibraon adjustments that

have been done on the ManTooth PT Module

since it lethe factory.

Auto Oﬀ

This slider gives you the opon of having your

ManTooth PT Module automacally turn itself

oﬀaer a designated period of me. It can be

set anywhere from 1 to 90 minutes. Aer the

ManTooth PT Module has been connected for

the speciﬁed auto oﬀme an alert will pop up

asking if you would like to reset the auto oﬀ

mer if you wish to reset the mer simply tap

anywhere on the screen. Also included is an

auto oﬀnever seng. Moving the slider all the

way to the lewill set the auto off mer to

never. Default is Auto Oﬀ= 5 min.

Geng Back to the Previous

Screen

To return to the previous screen from the one

you are currently viewing tap on the icon in the

upper lehand corner. This funcon is the

same in all of the screens in the ManTooth RSA

App.

Service History

In service history you are able to browse

through data that was saved during previous

service sessions. Saved data is organized

alphabecally by locaon then by each

locaon’s equipment ﬁnally by date and me

the data was taken. If you tap on the desired

service history reading you can see the reading

that was taken and either email the reading to

someone or delete it. Remember once you

have deleted a reading it can not be retrieved!

Start Session

Sessions are where you connect your phone or

tablet with your ManTooth PT Module to see

and collect system readings. To begin a new

session tap on “Start Session” in the App home

screen.

Session Sengs

Using the correct sengs that are speciﬁc for

the current system you are servicing will ensure

the best possible pressure readings as well as

liquid and vapor saturaon values.

Set Elevaon

Seng the elevaon will enable your

ManTooth RSA app to correct for elevaon

pressure variaons allowing for more accurate

pressure readings. You may either use your

phone or tablet’s built in GPS to determine

your elevaon or input the elevaon manually

by taping on the elevaon and entering your

elevaon above sea level in feet. **Note**

“Use GPS to Find Locaon” funconality may

not work on all devices especially those without

cellular service.

Set Refrigerant

To set the refrigerant for the current session

tap on “Refrigerant” then scroll through the list

of almost 100 NIST refrigerants and select the

refrigerant corresponding to the unit you will

be servicing. If you accidently select an

incorrect refrigerant do not worry you can also

change the refrigerant later in the readings

screen. Seng a refrigerant is mandatory

before moving to the next screen.

************WARNING************

Refrigerants classiﬁed as flammable are in red

text. If such refrigerants are selected, the

operator may need addional cerﬁcaons

and/or training. Consult your local government

and legal authority and comply fully with all

requirements.

***************************************

Set Locaon Details

If you want to organize your saved data in

session history you can enter the locaon

informaon for the current service session. This

informaon will show up in the service reports

you can email and is how the service history

will be organized. Here you have the ability to

either add a new locaon or select an exisng

locaon. Once you have designated a locaon

you can also designate what equipment is being

serviced during the session. Locaons can have

mulple pieces of equipment associated with

them so you can keep track of each individual

unit at locaons that may have more than one

system. Saved session data will be saved to

“Session History” in the app’s main menu and

sorted ﬁrst alphabecally by business name or

customer last name, then alphabecally by

assigned equipment name, and lastly by the

date and me the data was saved. **Note**

Locaon details are oponal. Any saved session

data without an assigned locaon will be saved

under “No Locaon” and appear at the end of

the Service History list. The “No Locaon” data

will be sorted simply by date and me. You can

not assign a locaon to data at a later me.

Assign Devices and Zero

Assign Detected Devices

Now you are ready to connect your ManTooth

PT Module to your current session. To connect

your module ﬁrst tap on “Devices None

Speciﬁed”, this will take you to the next screen.

Tap on the ManTooth PT Module(s) that you

wish to connect to your session from the list of

devices that are displayed. Remember your

Module’s name is the serial number printed on

the main label and should take the form of

YJPT-XXXX-XXXX. Next tap the save icon in the

upper right corner of the screen to save the

module(s) to the session. **Note** On iOS

devices you must tap on “Connect a Device” to

ﬁrst connect your device to your phone or

tablet and then select it under the “Select From

Connected Devices” heading to fully connect it

to your session. **Note** to connect to your

ManTooth PT Module(s) your module(s) must

be on and searching for a connecon (where

the blue light is blinking).

Apple iOS Android

Aer you save your module(s) to the session

they will be displayed at the top of the screen

under “Assign Detected Devices”. The pressures

from the connected module(s) will be displayed

at the boom of the screen. To zero the

pressure transducer readings tap on “Zero”

next to the corresponding pressure. **Note**

It is recommended that you zero the pressure

transducer(s) at the beginning of each new

session before connecng your ManTooth PT

Module to a system. This will ensure the most

accurate device readings.

Aach Devices

Before starng the session you have one more

chance to check to make sure that the pressure

transducers are zeroed. While in the “Aach

Devices” screen is the appropriate me to

connect your ManTooth PT Module to your

system. Connecng the ManTooth PT Module

to the system before beginning your session

will also ensure that the average, minimum,

and maximum readings are accurate.

Readings

The readings screen will display the pressures

and temperatures as measured by the

ManTooth PT Module, display the liquid and

vapor saturaon values, as well as calculate and

display the superheat and subcooling values.

The ﬁrst me you connect your ManTooth PT

Module to a new phone or tablet you will have

to assign the pressure transducers and

temperature sensors. These assignments are

not permanent and can be changed at anyme.

**Note** the pressure transducer in every

ManTooth PT Module (main or tethered) is

capable of accurately reading pressures up to

700 psia (48.3 bar) and therefore can reliably

be used on either the high or low side.

Inhaltsverzeichnis

Andere Ritchie Messgerät Handbücher

Ritchie

Ritchie 327G Technisches Dokument

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung