2L.1801.2
Ford Ranger 2015-
Steel 6 mm
950х205х171 mm
12,5 kg
Part Number:
Suited to vehicle:
Material:
Dimensions:
Weight:
TORQUE SETTINGS
INSTALLATION NOTICE
* The RIVAL concealed winch mounting bracket must be mounted and affixed to the vehicle
according to the installation manual provided by an authorized RIVAL dealer or Motor dealer
or by a special vehicle repairer or fitment center.
* Personal safety during the installation process must be adhered to at all times
and the use of personal safety equipment is highly recommended.
* Basic tool kit
* Marker
* Knife
* М10 44 Nm
SAFETY NOTICE
* The RIVAL concealed winch mounting bracket is designed to compliment the use and design of
the specified vehicle under conditions specified by the car manufacturer.
* While driving the vehicle at any speed, collision with any other vehicle, animal or object must
always be avoided.
* The operation of a vehicle where the bracket is not properly attached and fastened to the
vehicle, or where it has been damaged, must be avoided at all cost.
* It is recommended that you carry out regular inspections of all the bracket fittings.
* Do not install any winch with a higher pulling capacity than winch is specified in the manual.
Installation manual 2L.1801.2
< Page 1 of 11 >
CONCEALED WINCH MOUNTING BRACKET
REQUIRED TOOLS
www.rival4x4.com
Date: 12.08.2021
