Roadmaster Sterling Bedienungsanleitung
CONTENTS OF THIS
MANUAL MUST BE
READ BY OWNER
by R O A D M A S T E R
THE FINEST TOW BAR ON THE PLANET
Owner's Manual
IMPORTANT!
R O A D M A S T E R, I N C.
Congratulations on the purchase of your new STERLING™tow bar...and
THANK YOU. You have purchased the finest tow bar made...bar none! Quality materials,
computer technology and our reputation for craftsmanship have gone into each of our precision
folding tow bars. Each of our products is designed for safe, trouble-free towing. Your safety
is important to us. This booklet was written with your safety in mind.
Before using your tow bar, read this booklet. Understand how to install & maintain your
tow bar and carefully follow all the instructions and safety precautions. Remember, proper
installation and use of the product is the sole responsibility of the purchaser. Improper
installation, use or maintenance may result in personal injury, property damage or even
death.
A good time to inspect your mounting brackets is during your regular vehicle maintenance
check-ups such as an oil change, brake check or tire rotation. Don't forget to keep your tow
bar clean and lubricated on a regular basis. We offer a silicone spray specifically for this
purpose. Using our vinyl tow bar cover will help keep your tow bar free from dirt and road
grime assuring easy hook-up and operation. Safety cables are required by law in most
states. Follow our safety cable installation in this booklet.
To qualify for your Warranty you must completely fill out and return the enclosed
warranty registration card within (30) thirty days of purchase. As a bonus, we'll extend your
warranty to a total of two years at no additional cost. As a STERLING owner, rest assured you
have bought the finest tow bar on the planet. We thank you for your patronage and greatly
appreciate your discerning taste.
1
IMPORTANT
FILL OUT - TEAR OFF & MAIL WITHIN 30 DAYS TO QUALIFY FOR YOUR WARRANTY
AND TO RECEIVE YOUR FREE ONE YEAR EXTENSION.
Your warranty registration is an important record for ROADMASTER to keep in touch
with you. It also enables us to expedite any future claim, update or recall that may arise
concerning our products.
You must fill out & mail the warranty registration card within thirty (30) days from the date of
purchase to qualify for your warranty. If we receive your card within 30 days, we will extend
the coverage to a total of TWO (2) years at no extra charge.
YOUR TOW BAR SERIAL NUMBER IS ON A LABEL. YOU WILL
NEED THIS NUMBER WHEN YOU FILL OUT YOUR TOW BAR
WARRANTY INFORMATION.
RETAIN SERIAL NUMBER FOR FUTURE REFERENCE.
SERIAL NUMBER #
WARRANTY PROCEDURES
If you have any problems with this product, immediately contact ROADMASTER at 1-800-669-9690. If necessary, we
can direct you to your nearest warranty service center and make arrangements for any warranty repairs or replacements.
While under warranty, ROADMASTER will make arrangements for your product to be repaired or replaced . Do not
purchase replacement parts or pay for labor - you will not be reimbursed. See section titled “ROADMASTER
Limited Warranty” for specific details.
FREE EXTENDED WARRANTY
CAN'T LOCATE YOUR TOW BAR SERIAL NUMBER?
ROADMASTER
FREE BONUS
Serial Number
Located Here
10 MUSTS FOR TOWING SAFETY
1. TOW BAR MUST BE LEVEL WITH THE MOTORHOME. DO NOT TOW IF TOW BAR IS OVER 6 INCHES
OFF LEVEL IN EITHER DIRECTION
Towing with an upward or downward slope of the tow bar puts undue strain on the tow bar and mounting brackets. Do not tow
if tow bar is over 6 inches off level (see page 17).
2. STEERING MUST BE UNLOCKED AND FREE TO TURN WHEN TOWING
Failure to do so can result in severe tire and equipment damage. Steering wheel must be free to turn when towing.
3. DRIVER MUST NOT BACK UP MOTORHOME WITH VEHICLE ATTACHED
Backing up with towed vehicle attached easily causes the vehicle to "jack-knife" and will damage the tow bar, mounting bracket,
hitch, the towed vehicle front end and/or rear of the motorhome. This is the primary cause of tow bar damage and will void the
warranty.
4. TOW BAR MUST BE SECURED WITH LINCH PINS AND/OR PADLOCKS BEFORE TOWING
Unless the tow bar is secured to both vehicles with all designated pins and/or padlocks, you will lose your towed vehicle.
5. OWNER MUST KEEP THE TOW BAR CLEAN AND WELL LUBRICATED
As is the case with most precision equipment, frequent cleaning and care results in prolonged service. Details for cleaning &
lubricating your STERLING tow bar are outlined in the section titled "Care and Cleaning" (page 18).
6. OWNER MUST INSPECT ALL MOUNTS, BRACKETS AND FASTENERS
Visually inspect ALL bolts, wiring, cables and metal components each time before you tow to avoid problems on the road. Check
brackets every 3,000 miles. Inspect for any fractures or cracks in the steel or any visible damage. Do not tow if damaged.
Check torque on all bolts. Refer to installation instructions for mounting brackets and tow bar for torque ratings.
7. OWNER MUST FILL OUT & MAIL THE WARRANTY REGISTRATION CARD
It is IMPORTANT that you send in a completely filled out registration card as soon as possible. The information is needed in
case we must contact you for updates, recalls and to verify your warranty.
2
3
CAUTION! NEVER BACK UP WHEN TOWING YOUR VEHICLE
Backing up while the towed vehicle is attached, will easily "jackknife" the vehicle being towed.
This will result in damage to the towed vehicle, hitch, tow bar assembly, and/or motorhome.
ROADMASTER, Inc assumes no responsibility for any damage that is caused by improper use.
Backing up with a towed vehicle is considered "improper use".
FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT
IN PROPERTY DAMAGE, PERSONAL INJURY OR DEATH
8. OWNER MUST CHECK MANUFACTURER'S INSTRUCTIONS FOR TOWING
Some vehicles require a transmission lube pump, axle disconnect, driveline disconnect or free-wheeling hubs to tow without
damaging equipment. Failure to properly equip vehicle will result in severe damage to the transmission. Check manufacturer's
specifications for the proper procedure to prepare vehicle for towing. Be sure your vehicle is towable before taking it on the
road.
9. OWNER MUST NEVER TOW VEHICLE WITH A LIGHTER VEHICLE
Towing a vehicle equipped with a tow bar using a lighter weight vehicle will cause the rear vehicle to over-ride the front vehicle,
resulting in "jack-knifing", "leap-frogging", "fish-tailing" or other unsafe towing situation. Serious damage to both vehicles and
the towing system equipment could result.
10. OWNER MUST ALWAYS USE SAFETY CABLES OR CHAINS WHEN TOWING
A frame to frame safety cable hookup is legal in ALL states that require them.
11. OWNER MUST CHECK TURNING RADIUS OF MOTORHOME BEFORE TOWING.
Some motorhome chassis have such a tight turning radius that you can damage your motorhome, towed vehicle or tow bar while
turning sharply. Before getting on the road with your towed vehicle, you should test your turning radius in an empty parking lot.
With the towed vehicle attached, have someone watch you as you slowly turn sharply to see if you have this potential problem.
Damage that results from turning to sharply is not covered by warranty.
INSTALLER MUSTS FOR SAFETY
1. INSTALLER MUST SHOW OWNER HOW TO PROPERLY OPERATE THE TOW BAR.
Instruct Owner to read and follow instructions in Owner's Manual before using tow bar. Carefully read
the section “Hook-up Instructions” and familiarize yourself with the features of the tow
bar. Demonstrate it and have the owner do a few “practice runs”. You not only impress your customer
with your thoroughness, but will start your customer off on a safer and happier towing experience.
2. INSTALLER MUST CAUTION OWNER TO USE A HITCH OR RECEIVER FOR THE
MOTORHOME THAT IS RATED HIGHER THAN THE ACTUAL WEIGHT OF YOUR VEHICLE
INCLUDING ALL OF ITS CONTENTS.
3. INSTALLER MUST CAUTION OWNER TO SECURE TOW BAR TO BOTH VEHICLES WITH
DESIGNATED PINS AND/OR PADLOCKS.
Unless all the pins are used to secure the tow bar to both vehicles, the owner will lose his
towed vehicle.
4.
INSTALLER MUST BOLT THE STERLING QD BASE TO A MOUNTING BRACKET
ATTACHED TO THE TOWED VEHICLE’S FRAME OR UNIBODY.
The STERLING tow bar is designed as a bolt-on device only. Virtually all vehicles require a mounting
bracket assembly that is connected safely to the frame, unibody or chassis and extends beyond the
bumper. Using a mounting bracket kit designed by ROADMASTER takes the burden of doubt out of
the installer’s hands. Under no circumstances should the tow bar be welded to the vehicle, nor
should any of the pre-punched mounting holes be altered. In fact, any welding or altering of the
tow bar will void the Owner’s Warranty.
The following "Musts for Safety" are provided to your installer with the installation instructions for
the STERLING. It is repeated here for your information. As a precautionary measure, verify that
you or the installer have followed all safety requirements before towing your vehicle.
4
5.
INSTALLER MUST ADVISE OWNER TO USE 6,000 LB. OR HIGHER RATED SAFETY CABLES
Frame to frame safety cables are legal in ALL states.
6. INSTALLER MUST STRESS IMPORTANCE OF OWNER SENDING IN WARRANTY CARD
New owners are to be urged to mail their Warranty Registration Card as soon as possible. This will
enable ROADMASTER to expedite any claim or update important information concerning their
STERLING tow bar.
7.
INSTALLER MUST READ INSTRUCTIONS THOROUGHLY BEFORE MOUNTING THE TOW BAR
Proper mounting of the tow bar is of critical importance. Proper centering and height positioning of the
tow bar will give the owner a safe, dependable and trouble-free towing system.
8. INSTALLER MUST BE SURE THE VEHICLE IS SUITABLE OR ADAPTABLE FOR TOWING
Not all vehicles can be safely towed as manufactured. A few models are not towable under any
conditions and others with automatic transmissions require additional equipment such as a transmission
lube pump, axle lock, driveline disconnect or free-wheeling hubs to make them towable. Failure to
properly equip the towed vehicle will result in severe damage to the transmission. Also, the steering
wheel MUST be unlocked for towing. Check manufacturer’s specifications for the proper way to unlock
the steering wheel.
FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT
IN PROPERTY DAMAGE, PERSONAL INJURY OR DEATH 5
6
Use caution when operating the tow bar to be sure that your hands, fingers or any
part of your body does not get caught between any moving components. Doing
so can result in pinching, crushing or cutting causing severe personal injury.
RELEASE
HANDLE
QD BASE
TABS
TABS
LINCH
PINS
BASE PIN
HITCH PIN
RELEASE
LATCH
RETAINING BOLT
SAFETY CHAN-
NEL
HOOK-UP INSTRUCTIONS
SAFETY CHAN-
NEL
CLIP
7
STEP 3
Follow Installation Instructions (in separate envelope) to
mount STERLING Quick Disconnect Base
STEP 1
STEP 2
STEP 4
With the STERLING tow bar in the folded position (Fig.1), insert it into
the motorhome’s receiver and secure with Hitch Pin & Clip.
Firmly hold both tow bar arms and rotate them so that they are
vertical as shown in Figure 2. WARNING: Never let go of the arms when
they are in the vertical position. The arms can fall and cause severe
injury if any part of your body is in the way.
Push the Release Latch forward to bring both arms down
to a horizontal position (Fig. 3). Swing both arms away from you
aligning the outermost arm with the tabs on the Quick-Disconnect
Base. Using the included Base pin, attach the arm and secure with
linch pin or optional padlock.
Fig. 1
Fig. 2
Tow Bar Arm
Base Pin
Tabs
Base Pin
Linch Pin
QUICK-DISCONNECT
BASE
Fig. 3
and locked as shown in this photo.
Failure to properly secure pins will
result in loss of towed vehicle.
IMPORTANT:
Base Pins
Must Be Installed
FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH
STEP 6
8
STEP 5
Now, swing the other arm to the opposite side and connect in the same manner. Before continuing make sure
your vehicle is prepared for towing as per the manufacturer's instructions. In particular make sure:
a. Your steering wheel is in the unlocked position so it can freely move
b. The transmission is in the correct gear for towing
c. The emergency brake is released
d. You've connected your safety cables and wiring
Now slowly pull away in the motorhome. Your tow bar will self center and the AUTOWLOK Sys-
tem will "SNAP" into position as you drive away. Visually verify that the locks have engaged before
taking your trip.
TIP:If the STERLING arm does not automatically lock when you pull the motorhome ahead, try turning the mo-
torhome left, then right as you drive away. This will pull each arm in the necessary direction to engage the locking
mechanism.
Andere Handbücher für Sterling
1
Inhaltsverzeichnis
Andere Roadmaster Autozubehör Handbücher
Roadmaster
Roadmaster 156-25 Bedienungsanleitung
Roadmaster
Roadmaster FALCON 522 Originalbetriebsanleitung
Roadmaster
Roadmaster Invisibrake 8700 Bedienungsanleitung
Roadmaster
Roadmaster 1109-174 Bedienungsanleitung
Roadmaster
Roadmaster 1209-118 Bedienungsanleitung
Roadmaster
Roadmaster Hands-Free Bluetooth Car Kit VRBT330W Betriebsanleitung
Roadmaster
Roadmaster 195125 Bedienungsanleitung
Roadmaster
Roadmaster 2120 Kurzanleitung
Roadmaster
Roadmaster Falcon 2 Bedienungsanleitung
Roadmaster
Roadmaster BrakeMaster 9000 Bedienungsanleitung
Roadmaster
Roadmaster 751428 Bedienungsanleitung
Roadmaster
Roadmaster FuseMaster 76512 Bedienungsanleitung
Roadmaster
Roadmaster Sterling ALL-TERRAIN 576 Originalbetriebsanleitung
Roadmaster
Roadmaster Falcon 2 Originalbetriebsanleitung
Roadmaster
Roadmaster 3128-3 Bedienungsanleitung
Roadmaster
Roadmaster Tracker Originalbetriebsanleitung
Roadmaster
Roadmaster 9700 Bedienungsanleitung
Roadmaster
Roadmaster 9300 Betriebsanleitung
Roadmaster
Roadmaster StowMaster 910003-10 Leitfaden
Roadmaster
Roadmaster 917-3 Bedienungsanleitung
