Robin Robin SmartView Bedienungsanleitung
Manual
Robin SmartView
Door Phone
Versie: 1.6 Eng - concept
Datum: 14-02-2012
gf1
1
Manual Robin SV ENG - v. 1.6
gf2
2
Manual Robin SV ENG - v. 1.6
About this manual
This manual describes mounting, installation and programming of the Robin SmartView Door
Intercom unit in combination with application software version 1.
If you have any questions after reading this manual, please contact us
via:
website: www.robin.nl
support website: support.robin.nl
by email [email protected]
by phone: + 31 72 534 64 26
gf3
3
Manual Robin SV ENG - v. 1.6
Contents:
1. Introduction
1. Robin SmartView Door Intercom
2. Operation
1. Operating the door phone
2. Answering
3. Controlling the camera
4. Controlling the built-in door opener
3. Mounting
1. Package contents
2. Installation dimensions
3. Tools and materials required for mounting
4. Mounting instructions
5. Robin SmartView Door Intercom connections
4. System installation
1. Requirements prior to installation.
2. Connecting the Robin SmartView Door Intercom to a network
and installing the Robin Discovery Utility software.
5. Configuration
1. Logging in on the Robin SmartView Door Intercom.
2. Configuration of the Robin SmartView Door Intercom.
6. Support
7. List of key words
gf4
4
Manual Robin SV ENG - v. 1.6
1 Introduction
1.1 Robin SmartView Door Intercom
Integrated functions
The Robin SmartView door intercom (Robin SV) is the first “end-to-end” Internet Protocol (IP)
entrance door intercom unit to offer 5 fully integrated functions in one single device:
Telephone device with a piezo push-button
SIP support for audio and video
High-resolution, full-colour camera with 180º fish-eye lens
Door opener
Security camera with movement detector
The Robin SV is easy to install.
A single module is all that has to be mounted; there are no individual loose boxes.
Simple operation
The Robin SV is equipped with one piezo push-button for dialling device numbers. The door opener
relay is activated via the device to which the call is directed.
The Robin SV is robustly constructed and vandal-proof.
SIP communication
The Robin SV uses the Session Initiation Protocol (SIP). This means that the entrance door unit can
be connected to any business telephone exchange (PBX) that supports the SIP protocol.
Door opener
The relay in the Robin SV is activated by typing in a key combination at the dialled device.
The device number and key combination can be specified in the software application for the Robin
SV.
The relay can be used to open a door, a gate or a barrier.
Built-in camera
A real-time video image of the person using the Robin SV at the entrance door is displayed on the
screen of the programmed device as soon as a call is answered, assuming the dialled device is
suitable for this.
gf5
5
Manual Robin SV ENG - v. 1.6
High-quality sound reproduction
The integrated concept means that there are no ‘converters’ which distort sound quality.
Consequently, the Robin SV offers exceptionally good sound quality, without echo or interference.
Security camera function
The built-in security camera is a unique feature of the Robin SV. The built-in camera in the Robin
SV operates as a simple camera, allowing you to see who is at the door.
However, it can also function as a security camera. When the Robin SV detects movement, it starts
to record the video image and sound from that moment on. In the event of a break-in (or attempted
break-in), this feature provides perfect video registration of the perpetrators.
No separate power supply
The Robin SV is powered via ’Power-over-Ethernet‘ (PoE).
This eliminates the need for a separate power supply; connection to a PoE network switch or
Midspan is all that is necessary.
Web-based configuration
The Robin SV is configured on a PC or Mac via a web browser (e.g. Firefox). A software application
in the web browser allows modification of all the settings for the Robin SV.
This feature makes configuring the entrance door unit extremely simple, regardless of the physical
location of the Robin SV.
In addition to configuring and programming the Robin SV via the web browser, this application also
offers the option of viewing any activity in the vicinity of the Robin SV in real time with the built-in
camera.
Because the application is based on a web browser, configuration, viewing activity via the camera,
running diagnostics and testing can be performed from a remote location. You can even access the
Robin SV from the other side of the world via internet (assuming ‘firewalls’ and ‘security settings’
allow this).
Activation
The Robin SV will indicate that it isn’t activated yet.
This procedure will activate future functions of the Robin SV and registers the device on your name.
The procedure takes approximately 5 minutes time.
gf6
6
Manual Robin SV ENG - v. 1.6
Robin Telecom Development
The installed base for the Robin Compact entrance door unit exceeds 10,000 systems. The new
Robin SV is one of the first entrance door units to feature SIP protocol integration for both audio and
video in a single unit.
Consequently, this entrance door unit is not only robust and proven, the use of the ‘end-to-end’
protocol means that it also offers all the advantages of an IP environment, such as integration and
management.
Robin Telecom Development is aware that the latest IP technology offers many possibilities.
As a result, we continually strive to modernise our IP products based on feedback we receive from
our customers.
The Robin SV is a logical development of the company’s first SIP door intercom , the Robin
Compact SIP.
gf7
7
Manual Robin SV ENG - v. 1.6
2 Operation
2.1 Operating the door phone
To ring the door phone, press on the bell-sign on the Robin SV.
The unit will play a ringing sound and the predefined telephone set will be called.
2.2 Answering
Answer the Robin SV by picking up the phone that is called by the Robin SV.
In case you use a compatible videophone, the video picture of the built-in camera is displayed on
the screen of the phone.
2.3 Controlling the camera
When the connection between the Robin SV and the videophone is established you can control the
camera with the numeric buttons on the phone.
Use the following keys on the keypad:
2 - Moves the image up
8 - Moves the image down
4 - Moves the image to the left
6 - moves the image to the right
Keys 1 and 3 will zoom the image out and in without loss of image quality.
2.4 Controlling the built-in door opener
The built-in door opener is controlled with pre-defined keys on the telephone set. When you activate
the door opener the attached door, fence or barrier will open.
You can change the default keys, a double # (##) in the interface of the Robin SV.
gf8
8
Manual Robin SV ENG - v. 1.6
3 Installation
3.1 Package contents
The Robin SV
USB stick with the ‘Robin Discovery Utility’ software
anti-theft Allen key
4 anti-theft screws
4 wall plugs (6mm)
drilling template
tie-wrap
This manual (PDF format, located on the USB stick)
3.2 Installation dimensions
The installation dimensions of the Robin SV are:
gf9
9
Manual Robin SV ENG - v. 1.6
3.3 Tools and materials required for mounting
The following are required when mounting the Robin SV:
core drill, 90 mm in diameter
masonry drill, 6 mm in diameter
stone chisel
general set of tools
anti-theft Allen key (supplied)
anti-theft screws (supplied)
6mm wall plugs (supplied)
drilling template (supplied)
tie wrap (supplied)
3.4. Mounting instructions
Follow the step-by-step plan described below for problem-free mounting of the Robin SV.
Step-by-step plan:
1. Drill two holes of 90 mm in diameter and 60 mm in depth.
Use the drilling template supplied in the package for this.
2. Remove the cores from the drillings using the stone chisel.
Shape the hole so that the plastic housing of the Robin SV fits with room to spare.
3. Feed the cable into the hole, leave enough excess length for a loop in the hole.
4. Drill the four fixing holes for the front panel using the drilling template and insert the wall
plugs supplied with the set into the holes.
5. Connect the ethernet cable to the clamb connector. (page 10)
6. Optional - connect the cable for operating the door switch to the clamb connector.
7. Secure the cable to the plastic housing using a tie-wrap.
8. Position the Robin SV in the hole in such a way that the looped cable fits neatly behind the
device.
9. Fix the device securely in place using the anti-theft screws supplied in the package.
Andere Handbücher für Robin SmartView
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Robin Gegensprechanlage Handbücher
Robin
Robin SIP Betriebsanleitung
Robin
Robin SmartView SIP Bedienungsanleitung
Robin
Robin Compact Bedienungsanleitung
Robin
Robin SV Series Bedienungsanleitung
Robin
Robin SIP Betriebsanleitung
Robin
Robin SlimLine Bedienungsanleitung
Robin
Robin SmartView SIP Bedienungsanleitung
Robin
Robin Compact SIP Bedienungsanleitung
