Robin SmartView SIP Bedienungsanleitung
Software version 3.6 or higher
Manual version: 3.2.0
Date: 05-04-2017
User Manual
Robin SmartView SIP
Robin ProLine SIP
Robin SIP
gf1
1
Manual Robin SV ENG - v. 3.2.0
gf2
2
Manual Robin SV ENG - v. 3.2.0
About this manual
This manual describes the installation and programming of the Robin SmartView SIP, the Robin
SIP and the Robin ProLine SIP unit in combination with software version 3.6.x. You can update the
software of the Robin to the latest version. For instructions on updating see page 62 of this manual.
This manual applies to the Robin SmartView SIP with 1, 2, 4 of 6 buttons, the
Robin SIP, the Robin ProLine SIP with 1, 2, 4 buttons and the Robin ProLine SIP with Keypad.
(Part numbers: C01060 - C01067 and C01068, C02050 - C02058, C03050 - C03058).
If you have any questions after reading this manual, please contact us at:
website: www.robin.nl
support website: support.robin.nl
e-mail: [email protected]
phone: + 31 72 534 64 26
A
About this manual
gf3
3
Manual Robin SV ENG - v. 3.2.0
Table of Contents
1 Introduction 5
1.1 Robin SmartView / ProLine SIP Door Intercom 5
1.2 Robin SmartView / ProLine SIP features 6
2 Operation 8
2.1 Operating the door phone 8
2.1.1 Robin with button(s) 8
2.1.2 Robin ProLine SIP with keypad 8
2.2 Answering 8
2.3 Controlling the built-in door opener 9
2.4 Access using a PIN code (Robin ProLine SIP with keypad only) 9
3 Installation 10
3.1 Package contents 10
3.2 Installation dimensions Robin SV 10
3.3 Installation dimensions Robin ProLine SIP 11
3.4 Tools and materials required for mounting 11
3.5. Mounting instructions 12
3.6 Connecting the Robin 13
4 System installation 14
4.1 Requirements prior to installation 14
4.2 Connecting the Robin to a network 14
5 Configuration 16
5.1 Logging in to the Robin 16
5.2 Configuration of the Robin 17
5.2.1 Telephony 18
5.2.1.1 Telephony / SIP 18
5.2.1.2 Telephony / Phonebook 21
5.2.1.3 Telephony / Call settings (Robin with 1, 2, 4 buttons) 25
5.2.1.4 Telephony / Call settings (Robin with Keypad) 28
5.2.1.5 Telephony / Call log 29
5.2.1.6 Telephony / Control 30
5.2.2 Audio 31
5.2.2.1 Audio / Settings 31
5.2.2.2 Audio / Detection 32
5.2.2.3 Audio / Media 33
I
Index
gf4
4
Manual Robin SV ENG - v. 3.2.0
5.2.3 Video 35
5.2.3.1 Video / Live 35
5.2.3.2 Video / H.264 36
5.2.3.3 Video / Settings 36
5.2.3.4 Video / AGC 39
5.2.3.5 Video / Overlay 40
5.2.3.6 Video / Motion 41
5.2.4 Network 42
5.2.4.1 Network / Status 42
5.2.4.2 Network / Settings 43
5.2.4.3 Network / HTTP 45
5.2.4.4 Network / Mail 46
5.2.4.5 Network / NAT 47
5.2.4.6 Network / RTSP 48
5.2.5 System 50
5.2.5.1 System / Device 50
5.2.5.2 System / Clock 51
5.2.5.3 System / Events 52
5.2.5.4 System / Security 56
5.2.5.5 System / Recording 57
5.2.5.6 System / Schedules 58
5.2.5.7 System / Software 59
5.2.5.8 System / Streams 60
5.2.5.9 System / Switch 61
5.2.5.10 System / Info 63
5.2.5.11 System / Debug 64
5.2.5.12 System / Logs 66
6 Support 67
Appendix A, List of key words 68
Appendix B, Electronic lock 71
I
Index
gf5
5
Manual Robin SV ENG - v. 3.2.0
1 Introduction
1.1 Robin SmartView / ProLine SIP Door Intercom
Integrated functions
The Robin SIP has many integrated functions in one single device:
Telephone device with one piezo push-button
SIP support for audio
Door opener
Advanced event mechanism
Extended API (Application Programming Interface)
The Robin SmartView SIP (Robin SV) has the same feature set as the Robin SIP and offers the
following additional features:
SIP support for audio and video
High-Definition, full colour camera with a wide-angle lens
Security camera with movement- and audio detection
RTSP streaming (audio and video)
The Robin ProLine SIP is a new addition to the Robin portfolio. it is equipped with the same
features as the Robin SV and offers the following additional features:
Premium design
Equipped with one, two, four buttons or a Keypad
Backlit buttons for more convenience during night time use
Engravable illuminating labels
Recessed screws
Modified GUI-layout
I
Introduction
gf6
6
Manual Robin SV ENG - v. 3.2.0
1.2 Robin SmartView / Robin SIP / ProLine SIP features
Easy to install
A single module is all that has to be mounted; there are no extra modules necessary.
Simple operation
The Robin devices with 1, 2 or 4 buttons are devices that can dial predefined phone extensions.
The door opener relay is activated via the device to which the call is directed. On the Robin devices
with keypad, the call is set up by typing a preset number on the keypad. It also features a PIN code
feature that can be used to unlock the door. All Robin intercoms with an integrated camera are
capable of sending e-mails containing a photograph of the person using the intercom to predefined
recipients.
SIP communication
The Robin uses the Session Initiation Protocol (SIP). This means that the intercom can be
connected to any IP-PBX or VoIP provider that supports the SIP protocol. To check compatibility
please see the compatibility chart on the supplied USB drive or on our support website: http://
support.robin.nl.
Door opener
The potential free (dry contact) relay switch embedded in the Robin is activated by typing in a key
combination at the dialled device. The key combination can be specified in the WEB-GUI of the
Robin. The relay can be used to open a door, a gate or a barrier.
Built-in camera (on Robin devices with build-in camera)
A real-time video image of the person using the Robin is displayed on the screen of the H.264
compatible videophone or softphone as soon as a call is answered.
! Note: When using an IP-PBX or VoIP provider, check the distributor of the IP-PBX or the VoIP
provider for H.264 video compatibility. !
High-Definition video quality (on Robin devices with build-in camera)
The build-in camera of the Robin is capable of displaying the video image in High-Definition.
The image can be set to an aspect ratio of 4x3 or 16x9. A maximum of three simultaneous video
streams is supported.
I
Introduction
gf7
7
Manual Robin SV ENG - v. 3.2.0
High-quality sound reproduction
Thanks to the advanced audio DSP in the Robin, it’s sound quality is exceptionally good without
any echo or interference.
Security camera function (on Robin devices with build-in camera)
The built-in camera can also be used for surveillance purposes. The Robin is able to deliver the
video stream to many Video Management Software systems (VMS) in two formats, MJPEG and
H.264 (RTSP). It is also able to photograph the person using the intercom and sending e-mails with
that photo to predefined recipients.
Picture To Email (on Robin devices with build-in camera)
All Robin intercoms running software version 3.5.0 or higher are equipped with a Picture To Email
function. It will send an email with a photo of the visitor to an (per button or preset) email address
of choice. The document: How-To_Picture2Email_ENG.pdf on the provided USB drive describes
the configuration of this function. You can also download this document on our support site: http://
support.robin.nl
No separate power supply
The Robin is powered via ’Power-over-Ethernet‘ (PoE IEEE 802.3af). This eliminates the need for a
separate power supply; connection to a PoE network switch or Midspan is all that is necessary.
Web-based configuration
The Robin can be configured on a PC or Mac via a web browser (e.g. Firefox, Chrome, Safari).
Using a web browser, modification of all the settings for the Robin is easy, regardless of the physical
location of the Robin SV.
In addition to configuring and programming the Robin via the web browser, it also offers the option
of viewing any activity in the vicinity of the Robin in real time with the built-in camera.
Compatible with WEBRelay
The Robin is compatible with an external IP relays, the ControlByWeb WEBRelay Quad-LS. This
external device is equipped with 4 build-in relays and can be connected to the LAN. The ‘Events’
mechanism in the Robin can control the four relays (page. 55).
I
Introduction
gf8
8
Manual Robin SV ENG - v. 3.2.0
2 Operation
2.1 Operating the door phone
2.1.1 Robin with button(s)
To ring the door phone, press on the bell-sign on the Robin. The unit will play a ringing sound and
the predefined telephone set will be called.
2.1.2 Robin ProLine SIP with keypad
The Robin with keypad has 16 keys.
Keys 1, 2, 3, 4, 5, 6, 7, 8, 9 and 0, use these keys to type the desired preset
Green call button, start calling the just entered preset
Red disconnect button, disconnect the call
The ‘i’-key, call a programmed preset
The ‘C’-key, clear the input
The ‘*’- and ‘#’-key, used for entering a PIN code
The Robin with keypad offers you the ability to create a call list. This call list contains presets
(for example apartment numbers) to which you can assign up to three phone numbers, an e-mail
address (optional) and a PIN code (optional). By dialing the preset number on the intercom it will
start calling phone number one. If the first number is engaged or not answering it will continue
wit the second number. If the second number is engaged or not answering it will continue wit the
third number. It also features a ‘i-button’ on the Keypad. This button can be programmed to dial a
predefined preset, for instance the reception or building manager.
Keypad specific settings such as beep volume, -frequency or backlight can be changed in the menu
- Telephony-Call settings-General-.
2.2 Answering
You answer a call initiated by the Robin by answering the phone that is being called. In case
you use a H.264 compatible videophone or softphone, the video picture of the built-in camera is
displayed on the screen.
O
Operation
gf9
9
Manual Robin SV ENG - v. 3.2.0
2.3 Controlling the built-in door opener
The built-in door opener is controlled with predefined keys on the telephone set that answers the
call. When you activate the door opener, the attached door, fence, barrier, etc. will open.
You can change the default code to open the door in the interface of the Robin in the menu
-System-Switch- (default code: ##).
2.4 Access using a PIN code (Robin ProLine SIP with keypad only)
The Robin with keypad can activate the door opener by entering a PIN code on the Keypad.This
PIN code is preset depended, so every preset can have his own PIN code. When the correct PIN
code is entered, the intercom can activate the build-in relay switch or an external relay switch using
the ‘Events’ mechanism.
To enter a PIN code on the intercom, start by pressing the ‘*’-key and end it by pressing the ‘#’-key.
Assuming the PIN code is 123456 you will need to enter: *123456# to unlock the door. When a
valid PIN code is entered a tune will be played by the intercom and the build-in relay switch will be
activated.
O
Operation
Andere Handbücher für SmartView SIP
1
Dieses Handbuch passt für folgende Modelle
11
Inhaltsverzeichnis
Andere Robin Gegensprechanlage Handbücher
Robin
Robin Robin SmartView Bedienungsanleitung
Robin
Robin SV Series Bedienungsanleitung
Robin
Robin SmartView SIP Bedienungsanleitung
Robin
Robin SIP Betriebsanleitung
Robin
Robin SlimLine Bedienungsanleitung
Robin
Robin SIP Betriebsanleitung
Robin
Robin Compact Bedienungsanleitung
Robin
Robin Compact SIP Bedienungsanleitung
