Roland Metaza MPX-90M Bedienungsanleitung

USER’S MANUAL

To ensure safe usage and full performance of this product, please be sure to read through this manual com-

pletely.

To ensure immediate access whenever needed, store this manual in a safe location.

Unauthorized copying, quotation, or translation of this manual, in whole or in part, without the written approval

of Roland DG Corp., is prohibited.

The contents of this document and the specications of this product are subject to change without notice.

Roland DG Corp. assumes no responsibility for any loss or damage relating to this product, regardless of any

defect in this product or this manual. Such loss or damage, whether direct or indirect, includes, but is not lim-

ited to, that arising from the specications or performance of this product, that due to failure of the product

to perform, and that arising from any article made using this product.

Roland DG Corp. has licensed the MMP technology from the TPL Group.

WARNING

This product contains chemicals known to cause cancer,

birth defects and other reproductive harm.

For California

WARNING

This is a Class A product. In a domestic environment

this product may cause radio interference in which case

the user may be required to take adequate measures.

For EU Countries

For USA

FEDERAL COMMUNICATIONS COMMIS-

SION RADIO FREQUENCY INTERFER-

ENCE STATEMENT

NOTE:

This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules.

These limits are designed to provide reasonable protec-

tion against harmful interference when the equipment

is operated in a commercial environment. This equip-

ment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference

to radio communications.

Operation of this equipment in a residential area is

likely to cause harmful interference in which case the

user will be required to correct the interference at his

own expense.

Unauthorized changes or modication to this system

can void the users authority to operate this equipment.

Use only I/O cables that have been designed and manu-

factured specically for this device.

For Canada

CLASS A NOTICE

This Class A digital apparatus meets all requirements of

the Canadian Interference-Causing Equipment Regula-

tions.

CLASSE A AVIS

Cet appareil numérique de la classe A respecte toutes

les exigences du Règlement sur le matériel brouilleur

du Canada.

For EU Countries

Manufacturer:

ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN

The authorized representative in the EU:

Roland DG Corporation, German Ofce Halskestrasse 7, 47877 Willich, Germany

This system (including the housing and safety device) is a Class 1 laser product.

Complies with IEC 60825-1 Edition 2.0 (2007-03).

Complies with FDA performance standards for laser products except for deviations pursuant to Laser

notice No.50 dated June 24, 2007.

Caution - Use of controls or adjustments or performance of procedures other than those specied

herein may result in radiation exposure.

[Laser Specications of This System] (Including Main Frame)

Max. output: 46.5 μW, Pulse duration: 3.0 μs, Wavelength: 655 nm

Contents

Contents........................................................................................................1

To Ensure Safe Use .......................................................................................3

Important Notes on Handling and Use...............................................................8

About Operation Manuals ...................................................................................9

Documentation Included with the Machine .......................................................................... 9

Chapter 1 Getting Started .................................................................................11

1-1 About the Machine ................................................................................12

Features..............................................................................................................................................12

Names of Components.................................................................................................................12

Checking the Included Items.....................................................................................................14

1-2 Installation.............................................................................................15

Installation Environment .............................................................................................................15

Removing and storing the retainers........................................................................................15

Power Cord Connection...............................................................................................................16

1-3 Installing the Software...........................................................................17

System Requirements...................................................................................................................17

The Software You Can Install and Set Up...............................................................................17

Installing the Driver and the Software....................................................................................18

Chapter 2 Printing..............................................................................................25

2-1 Preparing for Printing ............................................................................26

Getting Started: Checking Print Workow ............................................................................26

STEP 1: Switching On the Power...............................................................................................27

STEP 2: Specifying Output Destination for METAZAStudio.............................................28

STEP 3: Preparing Instrument to be Imprinted....................................................................28

STEP 4: Preparing Print Data.......................................................................................................30

2-2 Starting Printing ....................................................................................35

STEP 1: Loading the Instrument to be Imprinted ...............................................................35

STEP 2: Making Prints....................................................................................................................43

STEP 3: Finishing Printing (Switching O the Power)........................................................45

2-3 Finishing and Stopping Printing Operations..........................................46

Stopping Printing Operations....................................................................................................46

Deleting Data from Print Queue ..............................................................................................46

Chapter 3 Maintenance and Adjustment .........................................................47

3-1 Maintenance and Adjustment................................................................48

Points to Note on Daily Care.......................................................................................................48

Cleaning the Body/Vise/Table....................................................................................................48

Cleaning the Adhesive Sheet.....................................................................................................48

Cleaning of the Head Cap ...........................................................................................................48

3-2 Adjustment ............................................................................................49

Adjusting the Striking Force of the Pin...................................................................................49

Adjustment of Origin Point.........................................................................................................50

Contents

Windows® is a registered trademark or trademark of Microsoft® Corporation in the United States and/or other countries.

Company names and product names are trademarks or registered trademarks of their respective holders.

http://www.rolanddg.com

3-3 The Replacement of the Consumable Parts .........................................51

The Replacement Cycle for the Head Cap .............................................................................51

Head Replacement.........................................................................................................................52

Chapter 4 Appendix ...........................................................................................55

4-1 More Advanced Operations ..................................................................56

Directly Creating 2D Symbol......................................................................................................56

Registering a Composition and Adjusting the Striking Force........................................59

Changing Basic Settings of METAZA Driver..........................................................................60

Creating and Editing Line Text...................................................................................................61

Other operations available with METAZAStuido ................................................................65

4-2 What to Do If .........................................................................................66

The [Power/Movement] button is blinking. .........................................................................66

The machine doesn't run even when printing data is sent.............................................67

The printed location isn't where desired...............................................................................67

You cannot select the material of the object to be imprinted using METAZAStudio. .....................

The printed image is unattractive. ...........................................................................................69

The image is uneven. ....................................................................................................................69

The image is always faint at the same location. ..................................................................70

To install METAZA driver separately.........................................................................................72

To Install Software Separately....................................................................................................76

The METAZA Driver Cannot Be Installed................................................................................77

Uninstalling the METAZA driver................................................................................................78

4-3 When Moving the Machine ...................................................................80

Attaching retainers ........................................................................................................................80

4-4 Main Unit Specications........................................................................82

Printable Area ..................................................................................................................................82

Location of Power Rating and Serial Number Label..........................................................83

Specications...................................................................................................................................84

System Requirements for USB Connection...........................................................................84

To Ensure Safe Use

Improper handling or operation of this machine may result in injury or damage to property.

Points which must be observed to prevent such injury or damage are described as follows.

About WARNING and CAUTION Notices

WARNING Used for instructions intended to alert the user to the risk of death or severe injury

should the unit be used improperly.

CAUTION

Used for instructions intended to alert the user to the risk of injury or material

damage should the unit be used improperly.

* Material damage refers to damage or other adverse eects caused with respect to

the home and all its furnishings, as well to domestic animals or pets.

About the Symbols

The symbol alerts the user to important instructions or warnings. The specic meaning

of the symbol is determined by the design contained within the triangle. The symbol at

left means "danger of electrocution."

The symbol alerts the user to items that must never be carried out (are forbidden).

The specic thing that must not be done is indicated by the design contained within the

circle. The symbol at left means the unit must never be disassembled.

The symbol alerts the user to things that must be carried out. The specic thing that

must be done is indicated by the design contained within the circle. The symbol at left

means the powercord plug must be unplugged from the outlet.

To Ensure Safe Use

WARNING

Keep children away from the machine.

The machine includes areas and compo-

nents that pose a hazard to children and

may result in injury, blindness, choking, or

other serious accident.

Never attempt to disassemble, repair, or

modify the machine.

Doing so may result in re, electrical shock,

or injury. Entrust repairs to a trained service

technician.

For accessories (optional and consum-

able items, power cord, and the like), use

only genuine articles compatible with

this machine.

Incompatible items may lead to an ac-

cident.

Never use the machine for any purpose

for which it is not intended, or use the

machine in an undue manner that ex-

ceeds its capacity.

Doing so may result in injury or re.

CAUTION

Install in a location that is level and

stable.

Installation in an unsuitable location may

cause an accident, including a fall or tip

over.

Be sure to follow the operation proce-

dures described in this documentation.

Never allow anyone unfamiliar with the

usage or handling of the machine to

touch it.

Incorrect usage or handling may result in

unexpected injury.

Incorrect operation may cause injury

To Ensure Safe Use

WARNING

Connect to an electrical outlet that com-

plies with this machine’s ratings (for

voltage, frequency, and current).

Incorrect voltage or insufcient current may

cause re or electrical shock.

Do not use with any power supply other

than the dedicated AC adapter.

Use with any other power supply may lead

to re or electrocution.

Never use out of doors or in any loca-

tion where exposure to water or high

humidity may occur. Never touch with

wet hands.

Doing so may result in re or electrical

shock.

Never allow any foreign object to get

inside. Never expose to liquid spills.

Inserting objects such as coins or matches

or allowing beverages to be spilled into

the ventilation ports may result in re or

electrical shock. If anything gets inside,

immediately disconnect the power cord

and contact your authorized Roland DG

Corp. dealer.

Danger of electrical short, shock, electrocution, or re

Ratings

Never place any flammable object

nearby. Never use a combustible aerosol

spray nearby. Never use in any location

where gases can accumulate.

Combustion or explosion may be a dan-

ger.

Handle the power cord, plug, and electri-

cal outlet correctly and with care. Never

use any article that is damaged.

Using a damaged article may result in re

or electrical shock.

When using an extension cord or power

strip, use one that adequately satises

the machine’s ratings (for voltage, fre-

quency, and current).

Use of multiple electrical loads on a single

electrical outlet or of a lengthy extension

cord may cause re.

When the machine will be out of use

for a prolonged period, disconnect the

power cord.

This can prevent accidents in the event of

current leakage or unintended startup.

Position so that the power plug is within

immediate reach at all times.

This is to enable quick disconnection of the

power plug in the event of an emergency.

Install the machine next to an electrical

outlet. Also, provide enough empty space

to allow immediate access to the electrical

outlet.

If sparking, smoke, burning odor, un-

usual sound, or abnormal operation

occurs, immediately unplug the power

cord. Never use if any component is

damaged.

Continuing to use the machine may result in

re, electrical shock, or injury. Contact your

authorized Roland DG Corp. dealer.

To Ensure Safe Use

Important notes about the power cord, plug, and electrical outlet

Never place any object on top

or subject to damage.

Never bend or twist with undue force.

Never pull with undue force.

Never bundle, bind, or roll up.

Never allow to get wet.

Never make hot.

Dust may cause re.

To Ensure Safe Use

WARNING

Never touch the head immediately after

printing has nished.

Doing so may cause burns.

Warning label is afxed to make areas of danger immediately clear. The meaning of the label is

as follows. Be sure to heed its warnings.

Also, never remove the label or allow it to become obscured.

Caution: High Temperature

Never touch immediately after printing.

The head area becomes hot

Warning Label

Important Notes on Handling and Use

This machine is a precision device. To ensure the full performance of this machine, be sure to

observe the following important points. Failure to observe these may not only result in loss of

performance, but may also cause malfunction or breakdown.

This Machine is a Precision Device.

Handle carefully, and never subject the machine to impact or excessive force.

Never print material outside the range of specications.

Install in a Suitable Location

Install in a location having the specied temperature and relative humidity.

Install in a quiet, stable location oering good operating conditions.

Never use the machine in an environment where silicone substances (oil, grease, spray, etc.) are present.

Doing so may cause poor switch contact.

When Moving the Machine

When moving the machine, be sure to support it at the bottom using two hands. Attempting to move the

machine by holding it at a dierent location may result in damage.

When moving the machine to another location, be sure to attach the retainers. Attempting moving without

attaching the retainers may result in damage.

Printing

Never attempt to perform printing on the edges or over holes in printing material.

Printing results may vary according to the original data, the material printed, and the details of settings.

Before you perform actual printing, we recommend carrying out test printing.

Attempting printing with no material loaded may damage the pin or heads.

Inhaltsverzeichnis

Andere Roland Drucker Handbücher

Roland

Roland TrueVIS VF2-640 Bedienungsanleitung

Roland

Roland VersaCamm VP-540i Bedienungsanleitung

Roland

Roland TrueVIS SG2-640 Bedienungsanleitung

Roland

Roland LEC-300 Betriebsanleitung

Roland

Roland VersaStudio BR-20 Gebrauchs- und Pflegehandbuch

Roland

Roland TrueVIS VF2-640 Bedienungsanleitung

Roland

Roland Soljet Pro III XJ-640 Bedienungsanleitung

Roland

Roland CAMM-2 PNC-2300 Stücklistenhandbuch

Roland

Roland SOLJET Pro III XC-540 Bedienungsanleitung

Roland

Roland VersaSTUDIO Bedienungsanleitung

Roland

Roland Soljet Pro III XJ-540 Bedienungs- und Wartungshandbuch

Roland

Roland SOLJET Pro III XC-540 Bedienungs- und Wartungshandbuch

Roland

Roland METAZA MPX-70 Bedienungsanleitung

Roland

Roland SJ-745EX Kurzanleitung

Roland

Roland Texart XT-640 Bedienungsanleitung

Roland

Roland CAMM SCRIBE CS-20 Bedienungsanleitung

Roland

Roland XC-540W Bedienungsanleitung

Roland

Roland VersaStudio BN-20 Bedienungsanleitung

Roland

Roland Texart RT-640 Bedienungsanleitung

Roland

Roland VersaART RS-640 Bedienungsanleitung

Roland

Roland TrueVIS LG-640 Bedienungsanleitung

Roland

Roland Texart RT-640 Bedienungsanleitung

Roland

Roland VS-640 Bedienungsanleitung

Roland

Roland VersaUV LEF-20 Gebrauchs- und Pflegehandbuch

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung