Roland SOLJET PRO4 XF-640 Bedienungsanleitung

Setup Guide

This describes the setup tasks and important conditions about

the installation location that must be met in order to enable use

of this machine.

Read this rst.

Thank you very much for purchasing this product.

To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read

through this manual completely and store it in a safe location.

Unauthorized copying or transferal of this manual, in whole or in part, is prohibited.



The contents of this document and the specications of this product are subject to change without notice.

The documentation and the product have been prepared and tested as much as possible. If you nd any misprint

or error, please inform us.

Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use

of this product, regardless of any failure to perform on the part of this product.

Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect

to any article made using this product.

Contents........................................................................................................1

To Ensure Safe Use.................................................................................2

Pour utiliser en toute sécurité..................................................................9

Setup Guide........................................................................................................17

1. Installation Environment..........................................................................18

Deciding on an Installation Site ................................................................................................18

Temperature and Humidity ........................................................................................................19

Installation Space ...........................................................................................................................19

2. Included Items.........................................................................................20

3. Assembling and Installing........................................................................22

Step 1 : Assemble the Stand ~ Mount the Machine ~......................................................22

Step 2 : Installing the Media Holder.........................................................................................25

Step 3 : Install the Drain Bottle ..................................................................................................27

Step 4 : Attach the Ink-cartridge Tray......................................................................................29

Step 5 : Remove the Packing Materials...................................................................................30

4. Connecting the Cables............................................................................31

Connecting the Power Cable and the Network Cable......................................................31

5. Installing the Ink Cartridges.....................................................................32

Filling with Ink for the First Time...............................................................................................32

Installing the Ink Cartridges .......................................................................................................32

6. Network Settings .....................................................................................38

Introduction .....................................................................................................................................38

Step 1 : Make the Network Settings for the Computer.....................................................38

Step 2 : Make the Network Settings on the Printer............................................................40

Step 3 : Make the Port Settings for the Software RIP.........................................................42

7. When Not in Use for a Prolonged Period ................................................43

Keep Performing Maintenance .................................................................................................43

Alarm Feature ..................................................................................................................................43

8. When Moving the Unit.............................................................................44

Procedures from Preparing to Move Through Reinstalling.............................................44

Company names and product names are trademarks or registered trademarks of their respective holders.

Contents

To Ensure Safe Use

Improper handling or operation of this machine may result in injury or damage to property. Points

which must be observed to prevent such injury or damage are described as follows.

About WARNING and CAUTION Notices

WARNING Used for instructions intended to alert the user to the risk of death or

severe injury should the unit be used improperly.

CAUTION

Used for instructions intended to alert the user to the risk of injury or

material damage should the unit be used improperly.

Note : Material damage refers to damage or other adverse eects caused

with respect to the home and all its furnishings, as well to domestic

animals or pets.

About the Symbols

The symbol alerts the user to important instructions or warnings. The specific

meaning of the symbol is determined by the design contained within the triangle.

The symbol at left means "danger of electrocution."

The symbol alerts the user to items that must never be carried out (are forbidden).

The specic thing that must not be done is indicated by the design contained within

the circle. The symbol at left means the unit must never be disassembled.

The symbol alerts the user to things that must be carried out. The specic thing

that must be done is indicated by the design contained within the circle. The symbol

at left means the power-cord plug must be unplugged from the outlet.

To Ensure Safe Use

Incorrect operation may cause injury

WARNING

Be sure to follow the operation proce-

dures described in this documentation.

Never allow anyone unfamiliar with the

usage or handling of the machine to

touch it.

Incorrect usage or handling may lead to an

accident.

Keep children away from the machine.

The machine includes areas and compo-

nents that pose a hazard to children and

may result in injury, blindness, choking, or

other serious accident.

Never operate the machine while tired or

after ingesting alcohol or any medication.

Operation requires unimpaired judgment.

Impaired judgment may result in an ac-

cident.

Never use the machine for any purpose

for which it is not intended, or use the

machine in an undue manner that ex-

ceeds its capacity.

Doing so may result in injury or re.

For accessories (optional and consum-

able items, power cord, and the like), use

only genuine articles compatible with

this machine.

Incompatible items may lead to an accident.

Before attempting cleaning, mainte-

nance, or attachment or detachment of

optional items, disconnect the power

cord.

Attempting such operations while the ma-

chine is connected to a power source may

result in injury or electrical shock.

CAUTION

Exercise caution to avoid being pinched

or becoming caught.

Inadvertent contact with certain areas may

cause the hand or ngers to be pinched or

become caught. Use care when performing

operations.

Never attempt operation while wearing a

necktie, necklace, or loose clothing. Bind

long hair securely.

Such items may become caught in the ma-

chine, resulting in injury.

Conduct operations in a clean, brightly

lit location.

Working in a location that is dark or cluttered

may lead to an accident, such as becoming

caught in the machine as the result of an

inadvertent stumble.

Never climb or lean on the machine.

The machine is not made to support a per-

son. Climbing or leaning on the machine

may dislodge components and cause a slip

or fall, resulting in injury.

Caution: cutting tool.

This machine has an internal tool. To

avoid injury, handle the tool with care.

WARNING

Never attempt to disassemble, repair, or

modify the machine.

Doing so may result in re, electrical shock,

or injury. Entrust repairs to a trained service

technician.

To Ensure Safe Use

WARNING

Connect to an electrical outlet that com-

plies with this machine's ratings (for

voltage, frequency, and current).

Incorrect voltage or insufcient current may

cause re or electrical shock.

Never use out of doors or in any location

where exposure to water or high humidity

may occur. Never touch with wet hands.

Doing so may result in fire or electrical

shock.

Never allow any foreign object to get

inside. Never expose to liquid spills.

Inserting objects such as coins or matches

or allowing beverages to be spilled into the

ventilation ports may result in re or electri-

cal shock. If anything gets inside, immedi-

ately disconnect the power cord and contact

your authorized Roland DG Corp. dealer.

Never place any flammable object

nearby. Never use a combustible aerosol

spray nearby. Never use in any location

where gases can accumulate.

Combustion or explosion may be a danger.

Danger of electrical short, shock, electrocution, or re

Ratings

WARNING

Handle the power cord, plug, and electri-

cal outlet correctly and with care. Never

use any article that is damaged.

Using a damaged article may result in re

or electrical shock.

When using an extension cord or power

strip, use one that adequately satises

the machine's ratings (for voltage, fre-

quency, and current).

Use of multiple electrical loads on a single

electrical outlet or of a lengthy extension

cord may cause re.

Connect to ground.

This can prevent re or electrical shock due

to current leakage in the event of malfunc-

tion.

Position so that the power plug is within

immediate reach at all times.

This is to enable quick disconnection of the

power plug in the event of an emergency. In-

stall the machine next to an electrical outlet.

Also, provide enough empty space to allow

immediate access to the electrical outlet.

If sparking, smoke, burning odor, un-

usual sound, or abnormal operation oc-

curs, immediately unplug the power cord.

Never use if any component is damaged.

Continuing to use the machine may result in

re, electrical shock, or injury. Contact your

authorized Roland DG Corp. dealer.

Do not use the supplied power supply

cord for other products.

To Ensure Safe Use

Never place any object on top or subject to

damage.

Never bend or twist with undue force.

Never pull with undue force.

Never bundle, bind, or roll up.

Never allow to get wet.

Never make hot.

Dust may cause re.

Important notes about the power cord, plug, and electrical outlet

To Ensure Safe Use

Ink, cleaning liquid, and discharged uid are ammable and toxic

In the event of ingestion or physical distress

 In the event of contact with the eyes, immediately ush with water for at least 15 min-

utes. If eye irritation continues, seek treatment by a physician.

 In the event of contact with skin, immediately wash with soap. If irritation or inamma-

tion occurs, seek treatment by a physician.

In the event of ingestion, do not induce vomiting, and immediately seek treatment by

a physician. Forcibly inducing vomiting may lead to danger of choking.

If odor leads to physical distress, move to a well-ventilated location and rest quietly. If

dizziness or nausea persists, seek treatment by a physician.

WARNING

Keep open ame away from the work

area.

Ink and discharged uid are ammable.

Never store ink, cleaning liquid, or

discharged uid in any of the following

locations.

 Any location exposed to open ame

Any location where high temperature

may occur

Near bleach or any other such oxidiz-

ing agent or explosive material

Any location within the reach of chil-

dren

Fire may be a danger. Accidental ingestion

by children may pose a health hazard.

Never place an ink cartridge in re.

Ink may ow out, catch re, and spread re

to other nearby objects.

Never drink or sniff ink, cleaning liquid,

or discharged fluid, or allow them to

come in contact with the eyes or skin.

Doing so may be hazardous to the health.

CAUTION

Ensure adequate ventilation for the work

area.

Failing to perform ventilation may result in a

health hazard or danger of combustion due

to ink fumes.

Never allow an ink cartridge to be sub-

jected to impact, and never attempt to

disassemble.

Ink may leak.

To Ensure Safe Use

The total maximum weight of this machine reaches 300 kg ( 661 lb.)

Media weighs 40 kg ( 88 lb.)

WARNING

Install the machine in a location that is

level, stable, and able to bear the weight

of the machine.

The total maximum weight of this machine

reaches 300 kg ( 661 lb.). Installation in an

unsuitable location may cause a major ac-

cident, including tip over, fall, or collapse.

Unloading and emplacement are opera-

tions that must be performed by 6 per-

sons or more.

Tasks that require undue effort when per-

formed by a small number of persons may

result in physical injury. Also, if dropped,

such items may cause injury.

WARNING

Be sure to lock the stand's casters.

If the machine should begin to topple, a ma-

jor accident may result, including crushing

of the appendages or the body.

When storing roll media, implement

adequate safety measures to ensure

that the stored media will not roll, fall,

or topple over.

Danger exists of becoming pinned under the

media and suffering serious injury.

Handling roll media is an operation that

must be performed by two persons or

more, and care must be taken to prevent

falls.

Attempting to lift heavy media in a manner

that taxes your strength may cause physi-

cal injury.

WARNING

Caution: high temperatures

Areas such as the dryer become hot. Exer-

cise caution to avoid re or burns.

When printing is not being performed,

remove any loaded media or switch off

the power.

The continued application of heat at a single

location may cause the release of toxic gases

from the media or pose a re hazard.

WARNING

Never use media that cannot withstand

heat.

Doing so may degrade the media, or may

result in re or the release of toxic gases.

Danger of re, burns, or toxic gas emissions

To Ensure Safe Use

Warning labels are afxed to make areas of danger immediately clear. The meanings of these

labels are as follows. Be sure to heed their warnings.

Also, never remove the labels or allow them to become obscured.

Warning Labels

Caution: Moving Print Heads

The print heads inside the cover

move at high speed and pose a

hazard. Never insert the hand or

ngers into the gap.

Caution: Pinching Hazard

Be careful not to allow the n-

gers to become pinched when

closing covers.

Ink Is Toxic

Ink and discharged uid are toxic.

Avoid contact with the body. Use

only in a well-ventilated area.

Flammable

Ink and discharged uid are

ammable. Keep away from open

ame.

Caution: Moving Print Heads

The print heads inside the cover

move at high speed and pose a

hazard.Never insert the hand or

ngers intothe gap.

Caution: High Temperature

The platen and dryer become

hot. Exercise caution to avoid

re or burns.

Caution: High Voltage

Cover removal may pose hazard

of shock or electrocution due to

high voltage.

Andere Handbücher für SOLJET PRO4 XF-640

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Roland Drucker Handbücher

Roland

Roland Metaza MPX-90 Bedienungsanleitung

Roland

Roland GX-640/GX-500/GX-400/GX-300 Bedienungsanleitung

Roland

Roland Texart XT-640 Bedienungsanleitung

Roland

Roland PR-1111 Bedienungsanleitung

Roland

Roland Soljet Pro III XJ-640 Bedienungsanleitung

Roland

Roland Texart RT-640 Bedienungsanleitung

Roland

Roland IU-1000F Bedienungsanleitung

Roland

Roland XR-640 Bedienungsanleitung

Roland

Roland TrueVIS VG2-640 Bedienungsanleitung

Roland

Roland VS-540 Bedienungsanleitung

Roland

Roland iModela iM-01 Gebrauchs- und Pflegehandbuch

Roland

Roland VersaCamm SP-540V Bedienungs- und Wartungshandbuch

Roland

Roland SolJet PROII SC-540 Bedienungsanleitung

Roland

Roland SP-540i Bedienungsanleitung

Roland

Roland TrueVIS SG3-540 Bedienungsanleitung

Roland

Roland CAMM-1 PNC-1610 Bedienungsanleitung

Roland

Roland VersaCamm VP-540 Bedienungsanleitung

Roland

Roland VersaUV LEC2-300 Bedienungsanleitung

Roland

Roland SolJet Pro II V SC-545EXW Bedienungsanleitung

Roland

Roland SJ-1045EX Bedienungsanleitung

Roland

Roland METAZA MPX-70 Bedienungsanleitung

Roland

Roland VersaUV LEF2-200 Bedienungsanleitung

Roland

Roland TrueVIS VG2-640 Bedienungsanleitung

Roland

Roland SOLJET PROIII XC-540 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung