Attention: Please read the following instructions carefully to ensure that mounting operation will be carried
out in the right way .These instructions should be properly preserved for future reference. This lamp can not
be used on building sites, engineering workshops and similar applications.
I.Main construction ate
Type : 96200
Rated Power : Max 500 W
Glass : 177 x 140 x 5 mm
Weig t : 1.56 kg
Dimensions : 3178 x 230 x 210 mm
Electric s ock protection class:Ⅰ
External lig t protection class: IP54
Lamp socket size:R7s
Rated voltage: 220-240V~ 50Hz
Cable:H05RN-F 3G1.0mm
2
II.Safety instructions
1. Don’t touc t e ot surface by and during adjustment and normal operation because of ig
temperature.
2. Far away from t e products easy to burn or burst.
3. Don’t look at t e bulbs directly wit eyes.
4. Don’t use t e item wit out glass and stand.
5. Replace any cracked protective s ield.
6. T e bulbs couldn’t exceed t e rated power.
7. T e distance between t e item and t e objects must be more t an 1M.
8. If t e external flexible cable or cord of t is luminaire is damaged, it s all be exclusively replaced by t e
manufacturer or is service agent or a similar qualified person in order to avoid a azard.
III.Electrical safety
T is alogen lamp must be eart ed. If it becomes necessary to re-wire t e plug please follow t ese guidelines.
Always secure wires in plug terminals carefully. Make sure t e cable is firmly located in t e cord grip. NEVER
connect t e green & yellow wire to any terminal ot er t an one marked wit t e eart symbol ‘E’ or ‘ ’,
regularly inspect all electrical connections and wiring for damage Any faults s ould be immediately rectified
before furt er use of t is alogen lamp. Always ave t e wiring and connections c ecked by a qualified
electrician. In use, ensure all wiring and extension cable are kept clear of any cutting tools, s arp objects and
any ot er potential azard suc as wet floors, c emicals, solvents etc.
NOTE: If your mains wiring differs in any way from Diagram A. Consult a qualified electrician. Always ensure
t at t e mains supply voltage is correct. Always replace t e fuse wit one of an identical rating.
IV.Assembly and use
HALOGEN LAMP
Réf. 96200
