Rose electronics CRK-2DTPPDVI Bedienungsanleitung

CrystalView Pro™CAT5

DIGITAL CAT5 KVM EXTENDER

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.COM

INSTALLATION AND OPERATIONS

MANUAL

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any

means, electronic or mechanical, including photocopying and recording, without the prior written permission

of Rose Electronics.

Rose Electronics Part # MAN-CRVP5 - 1.1

Printed In the United States of America – Revision 1.2

Rose Electronics warrants the CrystalView Pro CAT5 to be in good working order for one year from

the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in

good working order at any time during this one-year warranty period, Rose Electronics will, at its

option, repair or replace the Unit as set forth below. Repair parts and replacement units will be either

reconditioned or new. All replaced parts become the property of Rose Electronics. This limited

warranty does not include service to repair damage to the Unit resulting from accident, disaster,

abuse, or unauthorized modification of the Unit, including static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period

to Rose Electronics or an authorized repair center providing a proof of purchase date. If this Unit is

delivered by mail, you agree to insure the Unit or assume the risk of loss or damage in transit, to

prepay shipping charges to the warranty service location, and to use the original shipping container or

its equivalent. You must call for a return authorization number first. Under no circumstances will a unit

be accepted without a return authorization number. Contact an authorized repair center or Rose

Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO

WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME

STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO

THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE

REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL

ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST

PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING

OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE

ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY

TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE

OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and Microsoft

Windows are registered trademarks of Microsoft Corp. Any other trademarks mentioned in this

manual are acknowledged to be the property of the trademark owner.

FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY

FEDERAL COMMUNICATIONS COMMISSION

AND INDUSTRY CANADA

RADIO-FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses and can radiate radio frequency energy

and if not installed and used properly, that is in strict accordance with the

manufacturer’s instructions may cause interference to radio communication.

It has been tested and found to comply with the limits for a Class B digital

device in accordance with the specifications of Part 15 of FCC rules, which

are designed to provide reasonable protection against such interference

when the equipment is operated in a commercial environment. Operation of

this equipment in a residential area is likely to cause interference, in which

case the user at his own expense will be required to take whatever

measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class B limits for radio noise

emission from digital apparatus set out in the Radio Interference Regulation

of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de la classe A

prescrites dans le Règlement sur le brouillage radioélectrique publié par

Industrie Canada.

CE DECLARATION OF CONFORMITY

This equipment is in conformity with the

Council Directives 89/336/EEC

The Declaration of Conformity is based upon

compliance of the product with the following

standards:

EN55022 UTP 1999 class A

EN55024:

IEC61000-4-2: 2001

IEC61000-4-3: 2001

IEC61000-4.4: 2001

IEC61000-4-5: 2001 (Cat5 device only)

EN61000-3-2 2001

EN61000-3-3 2002

TABLE OF CONTENTS

Contents

Disclaimer...................................................................................................... 1

System introduction....................................................................................... 1

Features.................................................................................................... 2

Compatibility............................................................................................. 2

DVI or VGA............................................................................................... 3

PC model....................................................................................................... 4

Rack model.................................................................................................... 5

CrystalView Pro CAT5 cables ....................................................................... 6

Device Control - OSD.................................................................................... 7

Select graphic source menu..................................................................... 8

Installation.................................................................................................... 14

Transmitter to Receiver cabling.............................................................. 15

SET-UP instructions (Mixed DVI and VGA) ........................................... 16

Applying power....................................................................................... 18

Operating instructions.................................................................................. 19

Frame Rates................................................................................................ 19

Troubleshooting........................................................................................... 20

Service Information...................................................................................... 22

Safety........................................................................................................... 23

Figures

Figure 1. PC model........................................................................................ 4

Figure 2. Input select menu........................................................................... 8

Figure 3. Scale mode menu .......................................................................... 8

Figure 4. Brightness/Contrast menu.............................................................. 9

Figure 5. Color / Color temp menu.............................................................. 10

Figure 6. Image menu.................................................................................. 11

Figure 7. Tools menu................................................................................... 12

Figure 8. Save menu ................................................................................... 13

Figure 9. Typical cabling configurations...................................................... 14

Figure 10. Pixelclock/Phase examples........................................................ 17

Tables

Table 1.transmitter to receiver cabling ........................................................ 15

Appendices

Appendix A. General specifications............................................................. 25

Appendix B. Parts and cables ..................................................................... 26

Appendix C. Firmware updates ................................................................... 26

Appendix D. Rack mount instructions.......................................................... 27

Appendix E. Rack mount illustration............................................................ 27

INTRODUCTION

CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATINS MANUAL 1

Disclaimer

While every precaution has been taken in the preparation of this manual, the

manufacturer assumes no responsibility for errors or omissions. Neither

does the manufacturer assume any liability for damages resulting from the

use of the information contained herein. The manufacturer reserves the

right to change the specifications, functions, or circuitry of the product

without notice.

The manufacturer cannot accept liability for damages due to misuse of the

product or other circumstances outside the manufacturer’s control. The

manufacturer will not be responsible for any loss, damage, or injury arising

directly or indirectly from the use of this product.

System introduction

Thank you for choosing the Rose ElectronicsCrystalView ProCAT5 KVM

station extender. The CrystalView Pro CAT5 is a very versatile CAT5 KVM

extender. It supports the latest digital DVI as well as analog VGA. All

combinations of DVI and VGA monitors and video cards are supported.

With this flexibility, you can connect a VGA video card to a DVI monitor, or a

DVI video card to a VGA monitor.

The system consists of two Units, a transmitter and a receiver. The

transmitter connects to your CPU or a Rose switch and the receiver

connects to a keyboard, video monitor and mouse or KVM station. The

transmitter and receiver are connected together with CAT-5 industry

standard cable. The receiver can be up to 330 feet from the transmitter

using CAT5 cable.

The PC model is available with transmitter and receiver KVM access. The

transmitter KVM version allows an additional KVM station to be connected

to the transmitter unit.

CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATIONS MANUAL

Using the CrystalView Pro CAT5 to remotely access your computer has

several advantages over conventional CAT-5 extenders. The CrystalView

Pro CAT5 transmits data digitally which provides a clear, sharp picture.

Computers used in hazardous industrial environments can be accessed

remotely, keeping the users safe and unexposed to any hazards.

Features

Perfect image quality at resolutions up to 1600 x 1200 using CAT-5

cable

Extend a KVM station from a CPU using:

CAT-5 for distances up to 1,000 feet (300m)

Supports PS/2 keyboards and mouse.

The CrystalView Pro CAT5 uses a microprocessor to emulate the

keyboard and mouse. The keyboard and mouse on the receiver do not

have to be connected for the PC to boot; only the transmitter Unit must

be connected to the PC.

On-screen display for adjusting brightness, contrast, saturation,

pixelclock, phase, and other parameters

Compatible with Rose Electronics family of KVM switches such as

ServeView, UltraView and UltraMatrix.

Compatible with Windows, Windows NT, OS/2, Unix, Linux and other

operating systems.

Fully automatic KVM sharing on a first-come first-serve basis using the

transmitter access model.

On the transmitter access model, the computers video is displayed on

both KVM stations monitors.

Rack mount kits available in 19”, 23” and 24” sizes.

Compatibility

Computers PCs (all operating systems)

Monitors Digital DVI

Analog VGA, SVGA, XGA, RGB (Sync-on-

green)

Keyboards PS/2 type keyboards

Mouse PS/2

CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATINS MANUAL 3

DVI or VGA

The CrystalView Pro CAT5 is designed to work with any combination of

VGA and DVI video cards and monitors. The ideal configuration is using a

DVI video card, a TFT monitor and DVI video cables. With this

configuration, no adjustments are needed. A set-up procedure may be

needed if you are using a VGA video card and a TFT, DVI monitor or a DVI

video card and a VGA monitor. The installation section of this manual

describes these procedures for different combinations of equipment and

cables.

Package contents

The package contents consist of the following:

The transmitter and receiver Units

Power adapter for transmitter and receiver units.

Installation and operations manual.

CPU adapter cables and CAT5 cables are usually ordered separately. If the

package contents are not correct, contact Rose Electronics or your reseller,

so the problem can be quickly resolved.

MODELS

CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATIONS MANUAL

PC model

Receiver

Transmitter

(Local KVM

access)

Transmitter

(No local KVM

access)

Shown with serial and audio options

Figure 1. PC model

Connectors:

Receiver unit

DVI-I – DVI/VGA – KVM stations video monitor connection.

(2) MiniDin-6 – KVM stations keyboard / mouse connection.

Link – RJ45

4-pin square – Power

RJ11 – Programming

DB9 – Serial data input

(2) 3.5mm stereo audio input/output

Transmitter unit (With Local KVM access)

DVI-I – DVI/VGA – CPU video connection.

DVI-I – DVI/VGA – KVM stations video monitor connection.

(4) MiniDin-6 – (2) CPU keyboard and mouse connections /

(2) KVM keyboard and mouse connections.

Link – RJ45

4-pin square – Power

RJ11 – Programming

DB9 – Serial data input

(2) 3.5mm stereo audio input/output

Transmitter unit (No Local KVM access)

DVI-I DVI/VGA – CPU video connection.

(2) MiniDIN-6 – CPU keyboard and mouse connections

Link – RJ45

4-pin square – Power

RJ11 – Programming

DB9 – Serial data input

(2) 3.5mm stereo audio input/output

CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATINS MANUAL 5

Rack model

The rack models consist of 1 to 10 independent units mounted in a single

rack mountable chassis. Each unit is individually configured and connected

to a corresponding remote or local unit. Transmitters and receivers can be

installed in the same chassis.

CABLES

CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATIONS MANUAL

CrystalView Pro CAT5 cables

Transmitter unit to CPU cable

CPU cables connect from the transmitter to a CPUs keyboard, video monitor

and mouse ports.

Receiver to KVM station cable

The keyboard, video monitor, and mouse cables on a KVM station can

connect directly to the receiver or a transmitter with local KVM access.

CrystalView Pro CAT5 to Rose switch cable

To connect a transmitter to a Rose switch such as a ServeView, UltraMatrix

or UltraView, use a CPU adapter cable, Rose cable part number CAB-

CX0606Cnnn.

Transmitter unit to Receiver unit cable

The transmitter is connected to the receiver with up to 1,000 feet of Cat-5

cable

Andere Handbücher für CRK-2DTPPDVI

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rose electronics Extender Handbücher

Rose electronics

Rose electronics CrystalView DVI Multi Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Extreme Bedienungsanleitung

Rose electronics

Rose electronics CRK-1P1V Bedienungsanleitung

Rose electronics

Rose electronics CrystalView EX HDMI Bedienungsanleitung

Rose electronics

Rose electronics CrystalView EX HDMI Multi CRV-SRDTXT2D-2T-HD6... Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Mini Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Exact Bedienungsanleitung

Rose electronics

Rose electronics Orion XTender OT2-SLDTXUD1D Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB2.0 CATx Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Bedienungsanleitung

Rose electronics

Rose electronics ViewLink Coax Bedienungsanleitung

Rose electronics

Rose electronics UltraLink 2 Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink CLK-4U2FMB-500M Bedienungsanleitung

Rose electronics

Rose electronics CRK-1DFMPDVI/SF Bedienungsanleitung

Rose electronics

Rose electronics CrystalView USB2 Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink CAT5 Serial Bedienungsanleitung

Rose electronics

Rose electronics CRK-1USB Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI CATx CRK-2DTXPD1D Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Micro LT Bedienungsanleitung

Rose electronics

Rose electronics CrystalView CrystalView TWISTED PAIR KVM... Bedienungsanleitung

Rose electronics

Rose electronics CrystalView HDT Bedienungsanleitung

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung