Rose electronics CrystalLink USB Fiber Bedienungsanleitung

CrystalLink USB Fiber

USB 2.0 Extender

INSTALLATION AND OPERATIONS

MANUAL

10707 Stancliff Road

Houston, Texas 77099 Phone: (281) 933-7673

www.rose.com

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form

or any means, electronic or mechanical, including photocopying and recording, without the prior

written permission of Rose Electronics.

Rose Electronics Part # MAN-CRL-USBF

Printed In the United States of America - Revision 1.1

Rose Electronics

warrants the CrystalLink™ USB Fiber to be in good working order for one

year from the date of purchase from Rose Electronics or an authorized dealer. Should this

product fail to be in good working order at any time during this one-year warranty period,

Rose Electronics will, at its option, repair or replace the Unit as set forth below. Repair parts

and replacement units will be either reconditioned or new. All replaced parts become the

property of Rose Electronics. This limited warranty does not include service to repair damage

to the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit,

including static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year

warranty period to Rose Electronics or an authorized repair center providing a proof of

purchase date. If this Unit is delivered by mail, you agree to insure the Unit or assume the

risk of loss or damage in transit, to prepay shipping charges to the warranty service location,

and to use the original shipping container or its equivalent. You must call for a return

authorization number first. Under no circumstances will a unit be accepted without a return

authorization number. Contact an authorized repair center or Rose Electronics for further

information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF

PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY

AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG

AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO

YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE,

YOUR SOLE REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE.

IN NO EVENT WILL ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES

INCLUDING ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR THE INABILITY TO

USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM

BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT

APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU

MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

NOTE: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and

Microsoft Windows are registered trademarks of Microsoft Corp. Any other trademarks

mentioned in this manual are acknowledged to be the property of the trademark owner.

FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY

FEDERAL COMMUNICATIONS COMMISSION

AND INDUSTRY CANADA

RADIO-FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses and can radiate radio frequency

energy and if not installed and used properly, that is in strict

accordance with the manufacturer’s instructions may cause

interference to radio communication. It has been tested and found to

comply with the limits for a Class A digital device in accordance with

the specifications of Part 15 of FCC rules, which are designed to

provide reasonable protection against such interference when the

equipment is operated in a commercial environment. Operation of

this equipment in a residential area is likely to cause interference, in

which case the user at his own expense will be required to take

whatever measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

the equipment.

This digital apparatus does not exceed the Class A limits for radio

noise emission from digital apparatus set out in the Radio

Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de la

classe A prescrites dans le Règlement sur le brouillage

radioélectrique publié par Industrie Canada.

EUROPEAN UNION DECLARATION OF CONFORMITY

The Declaration of Conformity is based upon

compliance of the product with the following

harmonized standards:

EN55022/A1 IEC 801-2

EN50082-1 IEC 801-3

IEC 801-4

These Class A digital apparatus complies with Canadian ICEX-003

TABLE of CONTENTS

Contents Page #

Disclaimer.............................................................................................1

System introduction..............................................................................1

Features............................................................................................2

Package contents.............................................................................2

Rose Electronics web site ................................................................2

About this manual.............................................................................2

CrystalLink USB Fiber model...............................................................3

Transmitter........................................................................................3

Receiver............................................................................................3

Cables...............................................................................................3

Operating Instructions..........................................................................5

Troubleshooting Guide.........................................................................6

Safety...................................................................................................7

Service Information ..............................................................................9

Maintenance and Repair ..................................................................9

Technical Support.............................................................................9

Appendices Page #

Appendix A. General Specifications..................................................10

Appendix B. Part Numbers and Cables ............................................10

INTRODUCTION

CrystalLink USB Fiber Installation and Operations

Manual

Disclaimer

While every precaution has been taken in the preparation of this

manual, the manufacturer assumes no responsibility for errors or

omissions. Neither does the manufacturer assume any liability for

damages resulting from the use of the information contained herein.

The manufacturer reserves the right to change the specifications,

functions, or circuitry of the product without notice.

The manufacturer cannot accept liability for damages due to misuse

of the product or other circumstances outside the manufacturer’s

control. The manufacturer will not be responsible for any loss,

damage, or injury arising directly or indirectly from the use of this

product.

System introduction

Thank you for choosing the Rose Electronics



CrystalLinkUSB

Fiber extender. The CrystalLink USB Fiber Extender is the result of

Rose Electronics commitment to providing state-of-the-art solutions

for today’s demanding workplace. The CrystalLink USB Fiber has

proven to be a valuable investment for any business, big or small,

that has a need to access their USB 1.1 or 2.0 peripherals from a

remote location. This location can be up to 6 miles away using

singlemode fiber cable (1,650 feet using multimode fiber cable).

The receiver unit provides 4 USB ports for connecting your USB

peripherals. The number of peripherals can be increased by using a

standard USB hub.

The USB peripherals can be USB 1.1 devices (low-speed or full-

speed) or USB 2.0 high-speed devices operating up to 480 Mb/s.

The receiver unit can supply up to 500 ma per USB port for driving

high-power USB devices.

Plug-and-play installation makes installing the transmitter and

receiver simple and easy. Connect the transmitter to the computers

USB port, connect the 4 USB ports on the receiver to your USB

devices, connect the transmitter to the receiver with up to 6 miles of

singlemode fiber cable, connect the power adapters to the transmitter

and receiver and power on the system. The USB devices will function

normally as if they are directly connected to your computers USB port

even though they are up to 6 miles away.

2CrystalLink USB Fiber Installation and Operations

Manual

Features







Supports USB 1.1 (low and full speed) and USB 2.0 (high-speed)







Extends USB devices up to 33,000 feet (10Km) over singlemode

fiber, 1,650 feet (500m) over multimode fiber cable







4-USB ports on the receiver unit







Up to 500 ma of power is available at each USB port for powering

high-power USB devices







Standard USB hubs can be used to increase the number of

connected USB devices.







Plug-and-Play installation , no configuration or set-up needed







Operating system independent, supports all major operating

systems

Package contents

The package contents consist of the following:

The CrystalLink USB Fiber transmitter and receiver units

One (1) 6 foot USB type A to type B cable

Two (2) power adapter for the transmitter and remote units.

(Auto-switching transformer)



Installation and operations manual.

Fiber and USB cables are usually ordered separately. If the package

contents are not correct, contact Rose Electronics or your reseller, so

the problem can be quickly resolved.

Rose Electronics web site

Visit out web site at www.rose.com for additional information on the

CrystalLink USB extenders and other products that are designed for

data center applications, classroom environments and other

applications.

About this manual

This manual covers the installation and operation of the CrystalLink

USB Fiber extender.

MODELS

CrystalLink USB Fiber Installation and Operations

Manual

CrystalLink USB Fiber model

Transmitter

Connectors

USB Type B

Fiber duplex LC

Power (+5VDC)

Indicators

Host LED

Link LED

Power LED

Receiver

Connectors

Power (+5VDC)

(4) USB Type A

Front:

Fiber duplex LC

Indicators

Power LED

Device LEDs (4)

Models available with USB 1.1 or USB 2.0 ports

Cables

CrystalLink USB Fiber USB Type B connector to USB Type A

Transmitter to computer connector

CrystalLink USB Fiber Industry standard singlemode or

Transmitter to Receiver multimode fiber cable with duplex

connection with crossover and

duplex LC type connectors

CrystalLink USB Fiber USB devices generally connect directly

Receiver to USB devices to the receivers Type A connectors

INSTALLATION

4CrystalLink USB Fiber Installation and Operations

Manual

Please refer to the safety section first before preceding with any

installation of the CrystalLink USB Fiber extender.

Installation of the CrystalLink USB Fiber extender consists of

following procedures:

1. Connect a USB cable from the transmitter to a computer’s USB

port using a USB type A to type B cable.

2. Connect the USB peripherals to the receiver.

3. Connect the transmitter to the receiver with up to 33,000 feet of

industry standard singlemode fiber cable with fiber duplex LC

connectors (1,650 feet using multimode fiber cable)

NOTE: Fiber cable must provide a duplex connection with

crossover and terminated with Duplex LC connectors at both ends

4. Connect the power adapters to the transmitter and receiver and

applying power.

5. Verify the power LEDs on the transmitter and receiver are on

6. Verify the Link LEDs on the transmitter and receiver are on

7. Verify the Host LED on the transmitter is on

8. Open the Device Manager on the host computers control panel

and click on the + next to the Universal Serial Bus controllers. If

the CrystalLink USB Fiber extender has been installed correctly, it

will be listed as a Generic USB Hub.

NOTE: The host computer must be equipped with an EHCI (USB 2.0)

host controller. OHCI/UHCI (USB 1.1) host controllers are

not supported.

For Premise cabling, the total fiber cable length, including

patch cords must not exceed the maximum cable length

specifications for multimode and singlemode fiber cables.

OPERATION

CrystalLink USB Fiber Installation and Operations

Manual

Operating Instructions

Operating your CrystalLink USB extender is no different than having

your USB peripherals directly connected to your computer’s USB port.

Any compatible USB device can be totally controlled and operated

normally with no special configuration or commands. USB printers,

digital cameras, scanners, or any compatible USB 1.1 or 2.0 device

will function properly. If more than 4 USB devices need to be

remotely accessed, you can add a standard USB hub to increase the

number of USB devices.

When using a USB hub, keep in mind that each USB port on the

receiver can supply up to 500ma of current. Connecting a 4-port USB

hub to one of the CrystalLink USB receiver ports supplies a max

current to the hub of 500ma or 125ma per hub port.

TROUBLESHOOTING

6CrystalLink USB Fiber Installation and Operations

Manual

Troubleshooting Guide

The troubleshooting section is used as a guide to understanding the

capabilities of the CrystalLink USB Fiber extender and for general

troubleshooting. If you have any problems or questions concerning

the installation, operation or usage of the CrystalLink USB Fiber

extender that is not covered in this manual, please contact Rose

Electronics for technical support.

All LEDs on the transmitter or receiver are off







Verify that the power adapter is connected to the unit and to a live

power source

Link LEDs on the transmitter and receiver are both off







Verify the fiber cable (with crossover) is securely connected to the

transmitter and receiver duplex LC connectors

Host LED on the transmitter is off







Verify the USB cable from the transmitter to the computer’s USB

port







Verify that the computer supports USB hubs







Verify that the CrystalLink USB Fiber is recognized in the device

manager as a Generic USB Hub, if not, contact tech support

All LEDs are on but the USB device does not operate correctly







Connect the USB device directly to the computer’s USB port. If

the device functions properly, connect a different type of USB

device to the receiver port the non-operating USB device was

connected to. If this device does not function, the unit may be

malfunctioning, contact tech support. If the device operates

properly, the first USB device may not be compatible with the

CrystalLink USB Fiber extender. Contact tech support for

assistance.

Inhaltsverzeichnis

Andere Rose electronics Extender Handbücher

Rose electronics

Rose electronics CrystalView Plus Bedienungsanleitung

Rose electronics

Rose electronics UltraLink 2 Bedienungsanleitung

Rose electronics

Rose electronics Xcion XCK-2DTXUD1D Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI EX Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Extreme Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB2.0 CATx Bedienungsanleitung

Rose electronics

Rose electronics CRK-2DTPPDVI Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI EX Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Mini Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI CATx CRK-2DTXPD1D Bedienungsanleitung

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Bedienungsanleitung

Rose electronics

Rose electronics RJ45 Bedienungsanleitung

Rose electronics

Rose electronics CrystalView CAT5 Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Quad Einrichtungshandbuch

Rose electronics

Rose electronics CrystalView CRK-1DTXT-HD5 Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB2.0 CATx Bedienungsanleitung

Rose electronics

Rose electronics CrystalView EX5 Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Bedienungsanleitung

Rose electronics

Rose electronics CrystalView USB2 Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Plus Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Bedienungsanleitung

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Bedienungsanleitung

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Betriebsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung