Rose electronics CrystalView USB2 Bedienungsanleitung

Using the CD

Insert the provided CD

and the Product

Document selection

window will

automatically display.

Select the product and

the Manual, DataSheet,

and QuickStart

document window will

display. Select the

document to display or

print. Documents are

in PDF format.

The CrystalView USB2 is a very versatile CATx extender. Single, dual, and

quad video and up to four USB devices can be extended up to 150 feet from

the controlling computer. A standard USB hub can be connected to increase

the number of USB devices. All video signals are automatically adjusted for

equalization, gain, and skew (optional). The CATx cable length is calculated

and the video automatically adjusted for a crystal clear display regardless of the

CATx cable type or cable length.

Connecting the Cables

Depending on

your model,

cables and

rear panel

connectors will

vary. Dual and

Quad models

connect with

additional video

cables and

CAT5 cables.

Installation

It is recommended that the following installation procedure be followed to

assure proper cable connections, power up sequencing, and accurate monitor

DDC table information is obtained from the connected video monitors. Also all

equipment should be powered off until all cabling is connected.

The above figure shows a typical configuration using the single video model.

The dual and quad video models are installed and configured in the same

manor with 2 or 4 PC video ports connected to the transmitter unit and 2 or 4

video monitors connected to the receiver unit.

Single, Dual or Quad video <<< USB Devices >>>

Cabling



Connect a CAT5 cable from the transmitter’s RJ45 Link connector to the

receiver’s RJ45 Link connector.



Connect CAT5 cables from the transmitter’s USB (1-4) RJ45 connectors to

the receiver’s USB (1-4) RJ45 connectors.



Connect the power adapters to the transmitter and receiver

(Do not apply power at this time)

First time power up sequence

The first time the system is powered up or a monitor is changed, the below

power up sequence should be followed

1. Turn on all video monitors

2. Apply power to the CrystalView USB2 Receiver

3. Apply power to the CrystalView USB2 Transmitter

4. Boot the PCs

5. Turn on all USB devices

Operating instructions- All models

Operation of your system is no different than having your keyboard, monitor,

mouse and USB devices connected directly to a PC. The only difference is

they can be up to 150 feet away. You can operate your system normally,

programs can be executed, maintenance can be performed, and any operation

normally performed can be done with no derogation in video quality and

performance.

The video signal on all models can be fine tuned using simple keyboard

commands. This is normally not needed but sometimes cable routing and

patch panels can degrade the video signal. Next to each video in port (HD15M)

on the transmitter there is a USB Type A port labeled AUX/KBD. To execute

the keyboard commands, connect a USB keyboard to the appropriate

AUX/KBD port. The AUX/KBD port is for video adjustments only. Once the

video has been adjusted perform the keyboard command Left Ctrl, Left Shift, k

to save the information.

Keyboard Commands

Command

Description

Left Ctrl, Left Shift, e:

Perform a cable length measurement

Left Ctrl, Left Shift, keyboard +:

Increase the video gain by 1

Left Ctrl, Left Shift, keyboard -:

Decrease the video gain by 1.

Left Ctrl, Left Shift, keypad +:

increase the video equalization by 1

Left Ctrl, Left Shift, keypad -:

Decrease the video equalization by 1

Left Ctrl, Left Shift, k

Saves any changes made

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.COM

Andere Handbücher für CrystalView USB2

Andere Rose electronics Extender Handbücher

Rose electronics

Rose electronics ViewLink CATx Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Bedienungsanleitung

Rose electronics

Rose electronics Xcion XCK-2DTXUD1D Bedienungsanleitung

Rose electronics

Rose electronics CRV-DLDFMPDVI Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI CAT Series Bedienungsanleitung

Rose electronics

Rose electronics Xcion DVI/VGA over CATx Bedienungsanleitung

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Betriebsanleitung

Rose electronics

Rose electronics VideoSplitter CAT5 Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Plus Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Extreme Bedienungsanleitung

Rose electronics

Rose electronics CrystalView HDT Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI EX Bedienungsanleitung

Rose electronics

Rose electronics RJ45 Bedienungsanleitung

Rose electronics

Rose electronics CrystalView CAB-MD6M2MD6F Bedienungsanleitung

Rose electronics

Rose electronics AUTO EQUALIZATION Bedienungsanleitung

Rose electronics

Rose electronics CRK-2DTPPDVI Bedienungsanleitung

Rose electronics

Rose electronics CLK-4U2FM-500M Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Rack CRV-12SLP Betriebsanleitung

Rose electronics

Rose electronics CLK-4U2TP-100M Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Quad Einrichtungshandbuch

Rose electronics

Rose electronics ORION Bedienungsanleitung

Rose electronics

Rose electronics CRK-1P1V Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink CLK-1U4TP-100M/PE Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung