Rosewill RNX-G1-G1W Bedienungsanleitung
1
Wireless LAN USB Adapter
User Manual V1.1
USING THIS DOCUMENT
This document provides detailed user guidelines for Wireless
LAN USB Adapter operation and setting-up. Though every effort has been
made to ensure that this document is up-to-date and accurate, more information
may have become available subsequent to the production of this guide.
Content
Chapter 1 Introduction ................................................................................................3
Chapter 2 Specifications ..............................................................................................4
Chapter 3 Installation/ Uninstallation.........................................................................5
3.1 Installation............................................................................................................5
3.2 Uninstallation .......................................................................................................8
Chapter 4 RtWLAN: Wireless LAN Management GUI ...........................................12
4.1 Introduction of Main Window............................................................................12
4.2 Station Mode ........................................................................................................18
4.3 AP Mode ...............................................................................................................26
Appendix 1: How to Use 802.1x ( Step by Step )..........................................................32
2
Chapter 1 Introduction
Thank you for purchasing Wireless LAN USB Adapter.
Wireless LAN USB Adapter is a perfect combination of both
performance and cost-effective product introduced. It is sincerely hoped that you
can enjoy the wireless world through this solidly profiled wireless adapter.
It provides a full solution of all the IEEE 802.11 b/g protocols, that
pass the WiFi tests and are compatible with all the wireless
products with WiFi logo. If you have a Wireless LAN USB Adapter
on hand, it means you can connect to the wireless world without any
difficulty.
It also provides all the data rates in the IEEE 802.11 b/g standards, with
both short and long preambles to ensure the compatibility of legacy wireless
products and new ones, saving the panic works for end users to find
compatible products.
Since the security issue has become one of the most important one in the wireless
society, it provides you with the full security coverage from the 64/128bits
WEP encryptions, second generation WPA-PSK encryption, to the most
advanced WPA2-AES encryption. WPA2 is the latest security standard currently
approved by WiFi standards.
Saving mode, Adhoc wireless Lan, Wake on Lan (WOL) and other exciting
features are also included in this Wireless LAN USB Adapter. This user manual will
guide you through these exciting features in the following chapters and we is believed
that you will be greatly satisfied with its performance and ease of use.
Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is
permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s
authority to operate the device.
3
Chapter 2 Specifications
Host system connections
Interface Fully complies with USB 2.0 or 1.1
USB date transfer rate USB high speed (480Mbps), and full speed (12Mbps)
Wireless LAN (WLAN) environment connections
Multimode features
WLAN Interface Fully complies with IEEE 802.11 b/g specifications
802.11 b:DQPSK with data scrambling capability to
provide data rate of 1,2,5.5 and 11Mbps
802.11 g:A high-speed Fast Fourier
WLAN transfer rate
Transform(FFT)/Inverse Fast Fourier Transform(IFFT)
provide data rate of 6,9,12.18,24,36,48 and 54Mbps
WLAN Frequency Band 2.4 ~ 2.497 GHz ((Industrial Scientific Medical Band)
Operation Channel Channel 1 ~ 11
Coverage Area Indoors:100ft with straight path
Compatibility Fully compatible to IEEE 802.11 b/g devices
Security Hardware-based IEEE 802.11i encryption/decryption
engine, including 64-bit/128-bit WEP, TKIP, and AES
Antenna Detachable dipolar antenna
On: link is on
Off: ling is off
Quick blinking: data transition
LED present
(Green/Red light)
Slow blinking with 5 times: scan wireless nodes
Wake on WLAN Wake up system by wireless LAN(AP mode)
SYSTEM REQUIREMENTS
Windows System : Windows 98SE, Me, 2000, XP or Windows 64bit.
PCs must have a device driver installed. It allows you to communicate
with WLAN Mini USB Adapter.
PACKAGE CONTENTS
1.Wireless LAN USB Adapter
2.Installation Software CD
3.User Manual
4
Chapter 3 Installation/ Uninstallation
Warning! Do not cover or block the airflow to the adapter. The adapter will reach a high temperature during use.
3.1 Installation
Before you proceed with the installation, please notice the following descriptions.
Note1: The following installation was operated under Windows XP.
(Proceduresare similar for Windows 98SE/Me/2000.)
Note2: If you have installed the WLAN USB driver & utility before, please uninstall
the old version first.
1. Do not plug the wireless LAN USB adapter into your computer USB port before installing the software
program .
Insert the software program CD , then auto installation window pops up on following:
2. While the following screen pops out, click Driver Installation
CD auto run 畫面
5
3. Click Driver Installation
CD auto run 畫面
4. Choose a set up language. Click Next to process the installation.
6
5. The system starts software installation of the WLAN USB adapter.
6. On Windows Logo Software Installation screen, click Continue Anyway to continue.
Note: Not all the drivers will have this message box.
7
7. Click Finish to complete the installation.
8. After click Finish to complete the installation , under Windows XP <ALL Programs> menu ,
REALTEK USB wireless LAN Utility program installed.
9. Insert the wireless LAN USB adapter into your computer USB port , the computer detected and
active the wireless LAN USB adapter automatically.
8
3.2 Uninstallation
From “Wireless Network Driver and Utility” or “Control
Panel” ”Change or Remove Programs”.
A. Uninstall the WLAN USB Adapter Driver from “Start” “All Programs”
Click “Uninstall” (or “Change/Remove”) to remove
Wireless LAN USB Adapter driver.
9
B. Click “OK” if you want to remove Wireless LAN USB Adapter
Driver .
10
Inhaltsverzeichnis
Andere Rosewill Adapter Handbücher
Rosewill
Rosewill RCW608 Bedienungsanleitung
Rosewill
Rosewill AC1200UBE Bedienungsanleitung
Rosewill
Rosewill RNX-N180UBE Bedienungsanleitung
Rosewill
Rosewill RNX-MiniN2 Bedienungsanleitung
Rosewill
Rosewill Wireless Adapter RNX-EasyN1 Bedienungsanleitung
Rosewill
Rosewill RCW604 Bedienungsanleitung
Rosewill
Rosewill RNX-N360PC Bedienungsanleitung
Rosewill
Rosewill RC-221 Bedienungsanleitung
Rosewill
Rosewill RNX-AC600NUBv2 Bedienungsanleitung
Rosewill
Rosewill RNX-N300UB Bedienungsanleitung
Rosewill
Rosewill IDE 3-in-1 Bedienungsanleitung
Rosewill
Rosewill RNX-N150 Bedienungsanleitung
Rosewill
Rosewill RNX-AC600NUB Bedienungsanleitung
Rosewill
Rosewill RNX-N2X Bedienungsanleitung
Rosewill
Rosewill RNX-N180UBE Bedienungsanleitung
Rosewill
Rosewill N900UBE Bedienungsanleitung
Rosewill
Rosewill RNF-405U Bedienungsanleitung
Rosewill
Rosewill AC1200UBE2 Bedienungsanleitung
Rosewill
Rosewill RC-600 Bedienungsanleitung
Rosewill
Rosewill RNX-N600UBE Bedienungsanleitung
