Rosewill RX353 Series Bedienungsanleitung
[ RX353 Series ]
3.5" SATA HDD to USB & eSATA
Ext. Enclosure w/Int.50mm fan
User Manual
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual
1
FEATURES
• Support up to 1000GB
• Front Panel Light beam affiliated Power ON/OFF switch
• Power On/Off for internal cooling fan
• OS Supports Win2000/ME/XP/VISTA, and Mac OS 8.6/9.x/10.x and above and
Linux kernel after 2.4.1.0
• Power: 100~240 AC Adapter with 12V/DC output
• SATA to USB 2.0, Back ward compatible to USB 1.1
• Plug & Play and Hot-Swappable
• Support SATA I/II to eSATA interface
• Material: Rigid Aluminum Body and ABS plastic panel
• Dimension: (LxWxH) 229x124x33mm
NOTICE
Enable Hot-Swap function:
In order to enable HOT-SWAP function, please check to make sure the
Motherboard supports HOT-SWAP function. Otherwise, the hot swappable
Function won't be work as well. (Please refer back to motherboard user guide)
Hardware Assembly Guide
Please register your product at www.rosewill.com for complete warranty information
and future support.
If you have any question while using our products, please feel free to contact us at
We will do our best to help you.
Thank you for purchasing our product and we hope you will enjoy it
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete warranty information
and future support for your product.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual
2
STEP1
Take out the enclosure from Aluminum cover.
STEP2
You will see the internal structure of the Enclosure.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual
3
STEP3
Fit the 3.5” HDD SATA connector into PCB’s SATA connector.
Push the HDD toward the PCB and make sure the connector
is well connected.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual
4
STEP4
Screw the HDD on the enclosure tightly.
STEP5
Push the HDD prop into the Aluminum Cover.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual
5
STEP6
Please install both screws
STEP7
Press the LED switch for power on/off.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual
6
HDD Formatting Guide
zYou may format your external HDD through USB2.0 connection.
zPlease make sure your external HDD is turned on and well
connected to the PC before formatting the HDD.
STEP1: Right-click “My Computer” icon and select the “Manage”
column.
STEP2: Select “Disk Management” and you will see your External
HDD showed “Unallocated”.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual
7
STEP3: Right-click on the “Unallocated” blocks and selects “New
Partition”.
STEP4: The “New Partition Wizard” will appear. Please follow the
instruction of the wizard to complete.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual
8
STEP5: When new partition is completed, the external HDD will be
recognized as a “New Volume”.
STEP6: Double-click “My Computer”. You will see the new
volume appears on your PC.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual
9
NOTICE
Question：Does this SATA enclosure support hot swap?
Answer：Yes, but it depends on the motherboard you have.
1. If your motherboard has an eSATA port in the Back I/O
Connectors Panel as shown in picture # 1 your hot-swap
function is supported and there is no need to install the
eSATA bracket. All you need is connecting the enclosure
with eSATA port at the back of your computer. You can
connect/disconnect the enclosure with your computer at
anytime.
2. If your motherboard only comes with an onboard SATA port
and no eSATA port available. This mean hot-swap is not
supported by your motherboard. You will need to install an
eSATA bracket. Since hot-swap is not supported, you must
connect the enclosure with the computer while it powered off.
The computer will recognize the enclosure during the booting
sequences and you should be able to see the drive after MS
Windows boot up.
Andere Rosewill Gehäuse Handbücher
Rosewill
Rosewill CULLINAN MX Series Gebrauchsanweisung
Rosewill
Rosewill RX81U-AT-25A Bedienungsanleitung
Rosewill
Rosewill PRISM S500 Gebrauchsanweisung
Rosewill
Rosewill Lineom Bedienungsanleitung
Rosewill
Rosewill CASE 6A Series Bedienungsanleitung
Rosewill
Rosewill Cullinan MX Gebrauchsanweisung
Rosewill
Rosewill RX81U-ES Series Bedienungsanleitung
Rosewill
Rosewill CHALLENGER-S Bedienungsanleitung
Rosewill
Rosewill RISE Bedienungsanleitung
Rosewill
Rosewill Orbit-Z1 Gebrauchsanweisung
Rosewill
Rosewill RX81-MP Series Bedienungsanleitung
Rosewill
Rosewill VIPER Z Bedienungsanleitung
Rosewill
Rosewill 5600 Series Bedienungsanleitung
Rosewill
Rosewill FBM-X1 Gebrauchsanweisung
Rosewill
Rosewill CASE 422 Series Bedienungsanleitung
Rosewill
Rosewill THRONE Bedienungsanleitung
Rosewill
Rosewill FBM-05 Bedienungsanleitung
Rosewill
Rosewill CULLINAN V Series Bedienungsanleitung
Rosewill
Rosewill Cullinan MZ Gebrauchsanweisung
Rosewill
Rosewill SCM-01B Bedienungsanleitung
