Rosewill RX81US-HT35A-BLK Bedienungsanleitung

External Enclosure for

3.5" SATA to USB + eSATA

RX81US-HT35A-BLK

User Manual

External Enclosure For 3.5” SATA to USB + eSATA User Manual

Please read this installation carefully before you use the

products.

Precaution:

•If it is a new HDD, needs to processing the disk partition

•Win98SE and WinME do not recognize NTFS formatted drives, so

if you want to use your drive on those platforms, we recommend

you to use FAT32 instead.

•Mac OS does not recognize NTFS formatted drives, to use your

device on both platforms, we recommend you using FAT32.

•If you use Win2000 / WinXP / Win Vista and FAT32, the biggest

single partition you can create will be 32GB. To create larger

partitions, you need to change to NTFS format.

•Make sure the jumper settings of your hard drive is “master”.

System Requirement

•Minimum Intel Processor II 350MHz, 64MB RAM

•Compatible with IBM PC, USB interface included，

Windows98SE/ME/2000/XP/Vista operate system.

•Minimum Apple G3 processor, 64MB RAM

•MAC computer system MAC OS V8.6 or higher.

•Linux OS: please download kernel USB stack.

Protection of DC adapter:

1. Primary (Input) Protection

The input power line will be fused with a fuse 2.0A, 250 VAC.

2. Secondary (Output) protection

2.1. Over Current (OC) Protection

When an internal fault occurs, or an external fault is applied to

the power, such that an overload or short circuit is applied to

the output, the power will be shutdown. Power latch is not

allowed.

External Enclosure For 3.5” SATA to USB + eSATA User Manual

2.2 Over Voltage (OV) Protection

If an over-voltage fault occurs on the adapter output, the

power will shutdown.

2.3 Short Circuit Protection

The power will protect itself, and shut down, if a short circuit

is placed between DC return and the output. This condition

will cause no damage to the power. Power latch is not

allowed.

Package Contents

•3.5 inch external

•Driver Disk

•Installation Guide

•AC adapter

•USB cable

•eSATA cable

•PCI bracket for eSATA

•Foot stand

•Screw Kit

FEATURE

•Standard USB 2.0 high speed transfer rate.

•Support Serial ATA. (USB + e-SATA)

•Suitable for all 3.5" HDD.

•eSATA transfer rate up to 3.0Gbps(NCQ support)

•All aluminum, to enhance heat dissipation.

•Foot-stand for vertical style.

•Plug and play / hot swappable.

•OS support Win 98SE/ME/2000/XP/Vista/Mac OS 8.6 above.

External Enclosure For 3.5” SATA to USB + eSATA User Manual

Technical Specifications

Bus Interfaces: USB v 2.0 / eSATA

Data Speeds USB 2.0 = 480 Mbps

eSATA = 3.0 Gbps (NCQ Support)

Connectors USB B receptacle / eSATA connectors

SATA Standard Compliant with SATA I / II with NCQ

support

LED Power On / Access

Power Supply AC Adapter 12V 2A

AC Input 100V ~240V full range

Dimensions 208 (D)*128 (W)*36(H) mm

Weight: 0.84Kg

Certification CE

External Enclosure For 3.5” SATA to USB + eSATA User Manual

Installation Guide

1. Release the screws (rear side) to pull out the HDD frame.

2. Located the HDD with the power & data connecter

3. Fasten the HDD by screws.

4. Pull in the frame into external box.

5. Fix the rear panel by screws.

6. After connect data cable and Power cord, the external HDD will

appear the relativity.

External Enclosure For 3.5” SATA to USB + eSATA User Manual

Attention

•Only one interface at one time can be used.

•If this HDD is new one, please partition & format disk. Otherwise

the system cannot detect HDD.

•The HDD jumper should be set to “master”.

•Make sure your PCI Host Card is installed correctly.

•If required, update your OS (win 2000 to SP4, WinXP to SP1a，Win

Vista)

Driver Installation

Windows 98SE

zAfter plug the external box into, the system will remind you

there is a new hardware of USB Storage Adapter add into.

zDesign the driver of the safe path (in the driver), the system will

active the installation automatically.

zAfter for a while, click "My Computer", USB HDD will appear the

relativity on the PC.

Windows ME/2000/XP/Vista

The system already provided support for the software.

MAC OS 9.x/above

OS 9.X edition:

The system already support for the device.

External Enclosure For 3.5” SATA to USB + eSATA User Manual

The divided partition of the external HDD

Win 98SE/ME SYSTEM

FDISK is command that doing the divided partition to HDD, The

steps of how to divided partition from the HDD by using FDISK as

follows:

•Plug the cable of USB into PC, and be sure that the PC has

identified HDD.

•Execute "FDISK" under the model of COMMAND.

•After enter the FDISK program [If the FDISK program does not

work, please restart your PC again (don't disconnect the USB

HDD) then it will be work]. Firstly select "The fifth item" --select

the USB HDD you want to divided partition for and then just see

the illustration as follows: Then just follow the instruction to

divided partition for the HDD of USB.

Windows 2000/XP/Vista

Plug the HDD into your system, it will appear the hot plug a play.

Just click “Control Panel”/ “manage tool” / “computer management”

/ “Disk management”. All the disk connects to the PC will appear on

the chart, as well as the state of the HDD. Find out the HDD and

click the right bottom of the mouse under the state of chart, just

follow the step. Take a look of the icon on the bottom.

Mac OS

Mac OS9.2 and earlier version does not support creating partition on

an external HDD. For your new HDD, you need to purchase

additional 3rd party software to creating your HDD partition.

For Mac OS X, use the Disk Utility to format and divided partitions

on your external disk.

External Enclosure For 3.5” SATA to USB + eSATA User Manual

• Select “Disk Utilities” in the utilities folder.

• Choose your external drive and format it.

Notice: If you want your ENCLOSURE on a Windows as well as

on your Mac OS, we recommend you to use a PC to format the

drive. Choose FAT32 format and do not change anything on the

partition or format on your Mac, otherwise the Windows OS can

not be able to recognize the ENCLOSURE.

To remove the device

For Windows 98SE Users

Before you remove your device please wait for “Access LED”

on reader stops blinking to prevent data loss.

For Windows ME/2000/XP/Vista Users

Please double-click the icon on the system tray. A

dialog box will appear.

Double-click the Generic USB Storage Device to remove the

device for preventing from data loss.

Mac OS

You can remove the cable of USB after putting the icon of

USB HDD on the desktop into the trash can.

External Enclosure For 3.5” SATA to USB + eSATA User Manual

FAQ

How to solve it if you can’t use the Mobile Disk under some OS:

It doesn’t support any USB device under the WIN95 and NT4 OS, so

that can’t use the Mobile Disk.

After formatting can PC use in the MAC?

If use the Mobile Disk in the PC, can just format directly. If the PC &

MAC cannot be in common use, you can use the MACOPEN

software (download from the Internet) in the PC, format to the MAC

model. If you used the MO storage before, you must familiar and

have more experience about it because MO storage has the same

problem when doing the format.

Why I can not see the drive?

If you can not see the drive, make sure the jumper settings of your

hard drive is “master”.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information

and future support for your product.

Inhaltsverzeichnis

Andere Rosewill Gehäuse Handbücher

Rosewill

Rosewill THRONE Bedienungsanleitung

Rosewill

Rosewill RDEE-12002 Bedienungsanleitung

Rosewill

Rosewill CASE 6A Series Bedienungsanleitung

Rosewill

Rosewill Orbit-Z1 Gebrauchsanweisung

Rosewill

Rosewill CHALLENGER-U3 Bedienungsanleitung

Rosewill

Rosewill FBM-01 Bedienungsanleitung

Rosewill

Rosewill ATX COMPUTER CASE R7439K Bedienungsanleitung

Rosewill

Rosewill SPECTRA D100 Gebrauchsanweisung

Rosewill

Rosewill Lineom Bedienungsanleitung

Rosewill

Rosewill Cullinan MZ Gebrauchsanweisung

Rosewill

Rosewill RX-200-APU3-25B Bedienungsanleitung

Rosewill

Rosewill RX81U-MP-25A-S/B Bedienungsanleitung

Rosewill

Rosewill RISE Bedienungsanleitung

Rosewill

Rosewill RX250U-BLK Bedienungsanleitung

Rosewill

Rosewill VIPER Z Bedienungsanleitung

Rosewill

Rosewill CHALLENGER-S Bedienungsanleitung

Rosewill

Rosewill CULLINAN MX Series Gebrauchsanweisung

Rosewill

Rosewill Prism T500 Bedienungsanleitung

Rosewill

Rosewill VIPER Z Bedienungsanleitung

Rosewill

Rosewill R7229 R7229 Bedienungsanleitung

Rosewill

Rosewill FB-03 Bedienungsanleitung

Rosewill

Rosewill PRISM M Bedienungsanleitung

Rosewill

Rosewill NEUTRON Bedienungsanleitung

Rosewill

Rosewill RX25-AT-SC-BLK/SLV Bedienungsanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Nexans

Nexans WTC05 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung

NewerTech

NewerTech Voyager S3 Bedienungsanleitung