Rover EXA 700 TAB Bedienungsanleitung
Www.roverinstruments.com
DISPLAYDISPLAY
EXA 700 TABEXA 700 TAB
EXA 700 TABEXA 700 TAB
USER’S GUIDE
2
GET TO KNOW YOUR EXA 700 TAB
FRONT PANEL__________________________________
• POWER
• RESET HARDWARE
To turn on
press the
‘HOME’ key.
With instrument ON, keep the “HOME” key pressed for 10”
and turn ON again.
To turn off
press and hold
the ‘HOME’ key
Or press the ‘HOME’
Button once and
touch the
SHUTDOWN icon
A
B
A. Display Touch 9” Pollici
B. LEDs
3
SIDE PANELS _____________________________________________________
• TOP SIDE
• OTHER SIDES
RIGHT LEFT
10
1 2
3
7
6
11
12
13
14
4
8
9
5
1. TV/RF Ingress type “N” 50 Ω
2. SAT/RF ingress type “F” 75 Ω
3. DC at RF IN ON/OFF Remote power switch
4. Slot Common Interface for CAM Module
5. ASI Transport Stream IN/OUT
6. LAN Eternet RJ45
7. Power key
8. Backup Battery Switch
9. HDMI Output
10. USB A 3.0 for memory stick
11. USB A 2.0 for memory stick
12. Power Input connector (12 VDC - 4A)
13. Right speaker
14. Left speaker
4
Make work easier by taking advantage of your multi-purpose bag.
Work safely and without restrictions with both hands free.
The sunlight shield flap allows improved visibility
of the high brightness display.
Secure your meter by connecting it to the
antenna mast or in your car using the practical
ring belt with quick attachment.
If you change the configuration of
the shoulder strap, you can easily carry
the meter vertically by your side.
You can also carry your instrument using its practical handle.
1
3
4
5
6
7
MULTI-PURPOSE BAG
You can use the bag’s convenient stand flap for operation on a
counter.
Connect the shoulder
strap to the two hooks at the
corners of the bag (top left
and bottom right), so you can
hang your meter around your
neck leaving both hands free.
2
5
INSTRUMENT CONFIGURATION
Touch SETTING ICON to access
to the General settings menu
Settings menu configuration
Touch NETWORK ICON to access
to the Network settings menu
Touch INFORMATION ICON to access
to the Instrument Information menu
Touch DATE & TIME ICON to access
to the Date & Time Actualization
menu
Touch DIAGNOSTIC ICON to access
to the Function Diagnostic menu
Touch FILES ICON to access
to the Local Memory menu
Touch UPGRADE ICON to access
to the Software Upgrade menu
6
SCREEN SHOT
The “SCREEN SHOT” function allows you to directly save the TFT monitor screens in an external
memory.
N.B.: The files are saved in .jpeg format.
• If you wish, connect an external memory source (not provided) to the USB A 3.0 or 2.0
socket otherwise the USB ICON will not appear
• Set the instrument on the screen to be saved: Spectrum, Measurements, Constellation,
Echoes etc. Now you will have 2 different solutions:
Swipe the screen down
Or swipe the screen up and touch
LOCAL MEM or USB ICON to save
to the desired memory
Touch LOCAL MEM or USB ICON to
save to the desired memory
7
Touch the TV Icon
Touch EUROPE and select the
Country & Channel desired, touch
APPLY to confirm or EXIT
Touch FREQUENCY if you want to
change the frequency received
Touch DC@RF if you want to
enable remote power supply
Main TV measurements screen
Touch MODE if you want to
change the receiving mode
Touch BAND if you want to change
the bandwidth received
SWITCH TO TV MODE________________________________________
DVB-T/T2
TELEVISION ANALYZER
8
Touch the ECHOES GRAPHIC to zoom IN
the Impulse response
Touch the PARAMETERS LIST to zoom IN
the transmission parameters
Touch the PARAMETERS LIST to zoom IN
the transmission parameters
Touch the colored MARKERS BOXES
to select the available markers
DVB-T transmission parameters list
example
DVB-T2 transmission parameters list
example
ECHOES VISUALIZATION & MARKERS SELECTION___
DVB-T TRANSMISSION PARAMETERS____________________
DVB-T2 TRANSMISSION PARAMETERS __________________
9
Touch INFO T2 to access to DVB-T2
informations
Touch SELECTION PLP to access to PLP
Selection menu
INFO DVB-T2 ___________________________________________________
PLP SELECTION ________________________________________________
10
SWITCH TO TV SPECTRUM MODE ________________________
TV SPECTRUM
ANALY ZER
Touch the TV Icon
TV Spectrum example
Touch dB/DIV to change
the dB division value
MARKERS, MAX and MIN HOLD, AVERAGE,
SHOULDER SX and DX CONFIGURATION EXAMPLE
Touch the Spectrum Icon
Touch SPAN to change the Span value
Touch REFERENCE LEVEL to
change the Reference Level value
Touch MARKERS to access to the
MARKERS SETUP MENU
Inhaltsverzeichnis
Andere Rover Messgerät Handbücher
Rover
Rover HD PRO TAB Bedienungsanleitung
Rover
Rover PrimeDigital Easy Meter Bedienungsanleitung
Rover
Rover HD TAB 700 Bedienungsanleitung
Rover
Rover HD TAB 9 Bedienungsanleitung
Rover
Rover S2 SCOUT Bedienungsanleitung
Rover
Rover ST2 Bedienungsanleitung
Rover
Rover HD TAB 900 Bedienungsanleitung
Rover
Rover OMNIA-6 Bedienungsanleitung
Rover
Rover OMNIA 7000 Bedienungsanleitung
